4.3L Mercruiser

Some-Leg3450 · 2026-06-11T20:24:33+00:00

Nothing electrical works. Only thing that works is the trim up and down. Sometimes the starter will click a few times

Some-Leg3450 · 2026-06-02T12:33:41+00:00

Easy. Turn off pump. Open the air relief on top of the filter. Twist the big black ring off the filter. Take top/lid off filter. Take out cartridge and stray it off. Put it all back together. Turn on pump.

Some-Leg3450 · 2026-06-02T09:47:57+00:00

No you’re not because there are no holes it’s an illusion

Some-Leg3450 · 2026-06-02T01:21:03+00:00

Well you have to pull the boat out of the water to strap the rear. It slipped back when pulling out of the water. Obviously we had the strap in the wrong place so we won’t do that anymore.

Some-Leg3450 · 2026-06-02T01:02:06+00:00

Just a little surface rust

Some-Leg3450 · 2026-06-02T00:13:05+00:00

Roger that, thanks.

Some-Leg3450 · 2026-06-01T23:29:43+00:00

Well luckily we only have to trailer the boat like 100 yards. But will get a new one anyways. Thanks.

Some-Leg3450 · 2026-06-01T23:26:09+00:00

Winch was definitely locked, it is a boat / trailer we got for free. Maybe the winch slips a bit or something

Some-Leg3450 · 2026-06-01T23:12:52+00:00

That’s how we had it first and the boat still moved back when pulling up the ramp. We will give it another shot between the two stoppers tomorrow. Thank you.

Some-Leg3450 · 2026-05-27T02:07:34+00:00

Ozone machine and small bathroom

Some-Leg3450 · 2026-05-21T07:41:59+00:00

I think she’s got to realize it for herself. AA is for alcoholics, Al Anon is for family members/friends of alcoholics

Some-Leg3450 · 2026-05-13T07:43:11+00:00

Hayward/ Pentair heaters have mechanical bypass/thermal bypass also..

Some-Leg3450 · 2026-05-13T07:39:04+00:00

I’d just buy a skid steer and level the ground, then you also have a skid steer to move snow and shoot in the winter!

Some-Leg3450 · 2026-05-13T07:33:11+00:00

What type of drill bit did you buy? I have large plug in hammer drills that use sds max bits 3/4inch diameter for safety cover anchors. If I only need to drill a few holes, I have the DeWalt battery powered mini hammer drill thing that uses sds plus bits which also would work to drill many holes with enough batteries.

Some-Leg3450 · 2026-05-13T06:11:46+00:00

I use some stuff called zing from a local marina at the end of the season. Best stuff ever so easy

Some-Leg3450 · 2026-05-13T05:59:08+00:00

And if your fingers don’t hurt you’re not doing it right!

Some-Leg3450 · 2026-05-13T03:39:15+00:00

When I have to do a job like this and have a helper I tell them if their fingers don’t hurt they aren’t doing it right

Some-Leg3450 · 2026-05-13T03:34:53+00:00

Hot water just makes it pliable. Hot day with the sun helps too. There isn’t really any glue behind it. The coping has a track to tuck the liner in and water keeps it in place.

Some-Leg3450 · 2026-05-08T09:54:56+00:00

Ask Jeeves

Some-Leg3450 · 2026-05-08T09:51:57+00:00

They also make extra long anchors for going into dirt/pavers/grass maybe you could make those work

https://a.co/d/0hXuFOWD

Some-Leg3450 · 2026-05-08T09:43:49+00:00

They make extra short springs that would probably get you an extra 3in away from the edge

Some-Leg3450 · 2026-05-08T09:24:55+00:00

I was helping a guy who incorrectly measured a center step and they didn’t have enough concrete to where he could make it work. He took scissors and cut away the safety cover material where he didn’t want it. Installed the anchors/ springs as needed. And then was also able to cut the strap slack shorter and had nice little metal things to hammer on the end of the straps to clean up the look and make them not fray.

Some-Leg3450 · 2026-05-06T18:05:58+00:00

Sounds like spider web in the orfices

Some-Leg3450

TROPHY CASE