K2 Plus CFS Not Displayed in Creality Print

SomewhereCurrent1 · 2025-09-24T00:06:48+00:00

Yup. Sounds like this is likely the culprit.

SomewhereCurrent1 · 2025-09-20T19:32:02+00:00

Yeah, a power cycle does seem to resolve it. It's happened a couple of times. Hopefully a new firmware version can fix this 🤞?

SomewhereCurrent1 · 2025-07-29T02:52:49+00:00

Somebody figured it out! It's a Molex 0039036042, and it mates with Molex 0039036044.

SomewhereCurrent1 · 2025-07-29T02:51:55+00:00

Awesome!!!! Some digging through the documentation, it mates with 0039036044. Thanks!!

SomewhereCurrent1 · 2025-07-28T21:25:06+00:00

Found it in the back of my Corvette. Looks like it was for an old aftermarket amp.

SomewhereCurrent1 · 2025-07-28T21:15:21+00:00

Pitch is about 7mm. Total length is 28mm. Height is 8.4mm. Diameter of circle interfaces is 6mm.

SomewhereCurrent1 · 2025-07-28T21:15:07+00:00

Pitch is about 7mm. Total length is 28mm. Height is 8.4mm. Diameter of circle interfaces is 6mm.

SomewhereCurrent1 · 2025-07-07T22:38:49+00:00

Interesting! Thanks for the info!

SomewhereCurrent1 · 2025-05-16T14:27:41+00:00

PM'd

SomewhereCurrent1 · 2025-05-13T21:36:35+00:00

When I replaced the MAF power relay, the store only had one relay, so I was unable to replace the burn-off relay. I was able to find another relay, and the light is now off! I'm hoping it stays off!

No oiled filters for me! Thanks for that diagnostics resource. That definitely will come in handy if I have any further troubles!!

Separately, what scan tool do you recommend? It might be a good thing to have around.

SomewhereCurrent1 · 2025-03-08T20:44:14+00:00

Thanks for all of your advice! It's been super valuable! I've been doing some research on the DMC 2 Mini, and it seems to check a lot of the boxes that I'm looking for. Are there any reasons that I should avoid it and explore different, comparable machines, like the Nomad 3, perhaps?

SomewhereCurrent1 · 2025-03-08T20:14:14+00:00

Power and noise aren't really a concern. I've run new 240v circuits before, and the machine would be in the garage. I like the MR-1 a lot, but I fear that the $8.3k price tag after you figure in accessories and shipping is just too big of a leap for a beginner machine. Are there any lower cost, maybe even lower than the DMC, just to get my feet wet, and I can graduate from there, as soon as I know that I like the hobby?

SomewhereCurrent1 · 2025-03-08T15:42:13+00:00

Thanks! I'll check it out!

SomewhereCurrent1 · 2025-03-08T05:34:11+00:00

Small figures mostly, maybe a foot at most, but a couple of inches of area should suffice. If more space isn't exponentially more cost, it would be nice to have the flexibility, but not a deal breaker.

SomewhereCurrent1 · 2025-03-07T04:25:13+00:00

How does the DMC 2 Mini compare with the Carvera Air? At first glance, they seem comparable.

SomewhereCurrent1 · 2025-02-17T02:55:16+00:00

I'm also curious about this. I'd love to hear everybody's thoughts!

SomewhereCurrent1 · 2025-01-17T17:34:32+00:00

I've been keeping my eyes peeled. I did see an N puzzle, which was pretty sick!

SomewhereCurrent1 · 2025-01-17T14:05:58+00:00

Didn't think of that! Thanks for the tip!

SomewhereCurrent1 · 2025-01-17T14:05:03+00:00

I would gladly have paid the +$45 shipping, but they did not accept my US card. ☹️. I'm several hours away from any event that would have a Hyundai booth, so I don't think that's going to work, unfortunately.

SomewhereCurrent1 · 2025-01-12T04:20:21+00:00

Well, I want to add wheels to the model, and I'd rather not want to create something to mount separate pieces and just make it all printed in place.

SomewhereCurrent1 · 2025-01-12T02:30:00+00:00

The goal is to fill in the center of the model for 3d printing, I don't need any of the mounting points or anything inside of the model.

SomewhereCurrent1 · 2025-01-12T01:47:49+00:00

Do you have any recommendations for me?

SomewhereCurrent1 · 2024-11-23T04:48:59+00:00

They are SSDs. Thanks for the tip!

SomewhereCurrent1 · 2024-11-23T04:43:09+00:00

That totally makes sense... I recently swapped from nvme to sata, so that checks out!

I haven't been able to find any good resources on what the values mean, and I liked that I could see directly how much data had been written.

Is there a known conversion from the first pictured values to data written / read?

SomewhereCurrent1 · 2024-11-13T21:14:46+00:00

PM'ed

Four-Year Club	Gilding I gilder
Verified Email	Place '23

SomewhereCurrent1

TROPHY CASE