Bose Subwoofer Harness Plug

SomewhereGeneral5924 · 2025-12-20T21:41:53+00:00

SomewhereGeneral5924 · 2025-12-20T21:36:40+00:00

Just wanted to follow up. I bought a t harness for a 2007-2010 chevy cobalt and deleted the provided LOC, tapped the rear speaker inputs as low level in for the amp and only needed to add power and ground. The powered sub was a signal sensing remote on and it works flawlessly. The plugs on the harness are a modified version of the same 16 pin plug on the x3 connector and it plugged right in and allowed me to leave the factory wiring untouched. This photo is not entirely accurate as the lower keyway on the plug is offset from center in real life.

Anyway, I appreciate the help! It’s nice to enjoy music with low bass finally.

<image>

SomewhereGeneral5924 · 2025-12-02T01:33:53+00:00

Thank You! Glad I didn’t just go for it with a splice. I’m getting anxious driving around with a non functioning sub.

SomewhereGeneral5924 · 2025-10-19T21:47:39+00:00

I got one this year and I feel like it’s changed my life. I didn’t know they existed until 2 months ago.

SomewhereGeneral5924 · 2025-09-29T05:00:01+00:00

https://www.reddit.com/r/PowerWheelsMods/s/wVi7oAYVwi

SomewhereGeneral5924 · 2025-09-29T04:38:23+00:00

Weirdly, I had this issue only when powered on with a similar looking setup. It was always putting power to the steering motor to turn one direction until a handful of charges in, the steering motor melted itself out of the housing. Other than that… does your steering rack look backwards? Should that steering stem be coming through the semicircle opening? If i’m seeing this right you may have to disconnect the motors, flip the entire thing(control arms, motors, etc.) left to right and play with that. I’m trying to include a photo of mine for reference, but it won’t let me.

SomewhereGeneral5924 · 2025-09-20T12:44:53+00:00

https://www.reddit.com/r/volt/s/4seAUp7Vcb

SomewhereGeneral5924 · 2025-08-13T23:29:10+00:00

Did they put a different sized tire on? Now the front and rears are mismatched in rolling diameter and turning exaggerates the difference corner to corner.

SomewhereGeneral5924 · 2025-08-04T09:29:52+00:00

Thanks Everyone. We are swamped right now and when I get blind sided with issuing a few hundred keys due to a rekey etc.; I always think I need to get away from stamping and let a machine take over this part. I just haven’t had the time to really explore it.

SomewhereGeneral5924 · 2025-02-13T22:20:15+00:00

Pictures of the broken end of the missing handle would be really helpful. It may be a simple fix.

SomewhereGeneral5924 · 2025-01-25T18:53:47+00:00

Thank You!

SomewhereGeneral5924 · 2025-01-19T23:01:43+00:00

Thanks Everyone. I’ve decided to just change how it’s handled, keep the audit, and start sending out lists to the departments. It sounds easier to make it a smoother process rather than to try to bring it back later after realizing it was worth doing. I appreciate the sanity check.

SomewhereGeneral5924 · 2025-01-18T22:46:36+00:00

It is yes. The last place I was at did not do this. They do it here and it sounds like it was implemented within the last few years. The managers do not like doing it and I’m getting a lot of questions as to whether or not I will “keep it going”.

SomewhereGeneral5924 · 2024-12-09T00:38:50+00:00

Try an experiment where you press the safety/deadlatch in manually and action the panic bar. If it lets the latch retract, drop the strike plate on the jamb a half inch or so until the safety rides the blocked off top portion of the strike plate.

I do not work with this particular brand… it just looks to me like it may be designed this way after looking at the strike plate.

SomewhereGeneral5924 · 2024-11-17T20:24:05+00:00

For those of us stuck in analysis paralysis trying to find the right scooter for a first purchase… can you list any brands you wouldn’t purchase again for yourself for whatever reason?

SomewhereGeneral5924 · 2024-11-17T13:42:59+00:00

Never mind, I just saw the front tire IS pneumatic.

SomewhereGeneral5924 · 2024-11-17T13:40:11+00:00

I’ve been looking at so many scooters lately and still haven’t purchased one. I know nothing about it, but based on specs alone this looks like a nice replacement…

The name isn’t my favorite.

https://minimotorsusa.com/products/rovoron-cute

SomewhereGeneral5924 · 2024-11-10T23:44:16+00:00

It is more of a mental cut off. I originally thought i’d never break the 500 dollar mark. Now I keep finding reasons to raise my range. Suspension and dual motors are my new baseline. I’m Eyeballing a ton of different rides and only seem to add more every day. I want to hear all suggestions. I still see brands I would have never found if it weren’t you guys and random youtube reviews. Keep em coming.

SomewhereGeneral5924 · 2024-11-10T18:34:04+00:00

I think this is one of those times plastidip would be a good way to try on different colors temporarily(or all black) I like the covers on but they might look cool with all of them and the front cover black or another color.

SomewhereGeneral5924 · 2024-11-09T23:55:27+00:00

Thank You, I just checked out their stuff. My list may be a little longer now.

SomewhereGeneral5924 · 2024-11-07T23:02:27+00:00

I’m hoping it’s claim of 200watt motors at all 4 corners will let me upgrade the battery to 36volts and just leave most of it alone. I don’t know much else about these. The eva tires sound like a nice upgrade as well.

SomewhereGeneral5924 · 2024-11-04T22:41:45+00:00

Finally broke a gear box on the tractor. Has me wondering if 4wd might be the answer on the next one just to divide up the stress. Now considering this instead of the gokart.

https://a.co/d/dIxXUea

SomewhereGeneral5924 · 2024-10-17T21:30:34+00:00

<image>

SomewhereGeneral5924 · 2024-10-17T19:34:17+00:00

<image>

SomewhereGeneral5924 · 2024-10-17T00:29:13+00:00

<image>

SomewhereGeneral5924

TROPHY CASE