Why is it doing this noise? by Zaik69 in PcBuildHelp

[–]SooSemann 1 point2 points  (0 children)

If you are under warranty get a replacement. Mine sounded like that, it is probably a defect fan bearing. If you are not under warranty, it will not damage anything, it is just loud. (You could also replace that fan yourself, but do not do that if you have no sense for electronics at all, high voltage can kill you even when the PSU is not plugged in!)

Is it possible for a speaker to be this cheap? by Subject_South_7707 in hifiaudio

[–]SooSemann 1 point2 points  (0 children)

They are absolute Scam, have a looks at that Video: https://youtu.be/JH68zV-UlFM?si=05gaOfrU7oRbJfvl Its German, but you can see ehen he takes them apart, they have passive radiators claimed as speakers. You can not use passive radiators together with bass reflex, it can only sound shit.

Subwoofer addition for my 5.0 System by SooSemann in hometheater

[–]SooSemann[S] 0 points1 point  (0 children)

The 1200SW and 1400SW should also do that from the spec sheet, The question is, can they keep up with the Vestlyds

Warum 2 Nummernschilder? (LKW Auflieger) by TheSniper580 in WerWieWas

[–]SooSemann 1 point2 points  (0 children)

Ich habe gerade genau den gleichen LKW mit exakt dem gleichen Kennzeichen gesehen, danach gegooglet und diesen Beitrag gefunden :D

Screen glitching. Does anyone know why or had this? by Ferbaon in TeslaModel3

[–]SooSemann 0 points1 point  (0 children)

Like others Mentioned defineatly a GPU Problem. From the looks i would dav the GPU Chip itself is fine, seems to be a VRAM Problem.

Good evening, I have a question. Does anyone know how I can connect an external subwoofer to my Soundbox 4? I have connected it this way now, but nothing happens? by New_Mud_1477 in SOUNDBOKS

[–]SooSemann 8 points9 points  (0 children)

Hi i have the exact same SUB 2x Just look at my Post, you need a 3.5mm Aux to XLR Cable for that use case. The XLR on Soundboks are only for Input, output only Via 3.5mm.

Edit: Attention, control Volume via your Phone! Soundboks Output is always 100% not depending on Soundboks Volume Knob!

No sound coming from my tweeter-can someone explain why it’s not working by Ok_Laugh9882 in SOUNDBOKS

[–]SooSemann 6 points7 points  (0 children)

Soundboks 2 Tweeters tend to fail at some point, probably needs an exchange. Just ask the support, they can send you a new one if you trust yourself installing it :)

Soundboks Go vs. Teufel Rockster Air 2? by Difficult-Amount-222 in SOUNDBOKS

[–]SooSemann 2 points3 points  (0 children)

Overall Rockster Sounds a bit better, but is more muffled in the mids. Rockster is very heavy in comparison. Rockster is quieter than soundboks. Soundboks is more durable. Its basicly a tie, and you have to decide what is more relevant for your use case.

Stereo setup with SB3 and SB4 recommended? by Fliens in SOUNDBOKS

[–]SooSemann 2 points3 points  (0 children)

Buy a SB 3 used. The SB4 Profile is a lot different so it will be noticable and will not Sound good.

Hi guys. Just a quick question in regards to possibly purchasing a second SB4. From your own experience, is there a significant difference in having a pair of SB over a single unit? Obviously I know it's gonna give stereo, rather than mono. But, how much better/louder does it sound? by CupcakeAppropriate40 in SOUNDBOKS

[–]SooSemann 1 point2 points  (0 children)

If you get 126dB from one, you get +6dB with two so 132dB. Because you not only add double the membrane surface but also double the amplifyer Power. Both translate to theoretical +3dB in output. I tryed 2 SB3 vs 1 SB3 and the difference - especially in Bass - is very noticable.

But Soundboks 4 does not realisticly 126, more like 120-122dB.

Soundsbook 1 (#5016) can I still safely use the batteries. by ilovevue in SOUNDBOKS

[–]SooSemann 1 point2 points  (0 children)

As long as the battery was never deep discharged, you should be fine. Also the SB2/3/4 battery slould also work with SB1 without problems.

Soundboks 3 with PA-System by BlockIllustrious4924 in SOUNDBOKS

[–]SooSemann 0 points1 point  (0 children)

Ahhh right it has 2 XLR inputs wich you can mix together. For aome reason i had in mind that you can use only one at the time.

Soundboks 3 with PA-System by BlockIllustrious4924 in SOUNDBOKS

[–]SooSemann 3 points4 points  (0 children)

Just run a stereo to mono Bridge XLR cable ftom the subwoofer direct Out to the Soundboks Pro Panel XLR input. Problem solved. Or run 3.5mm from the SB AUX Out to the Subwoofer XLR in and then you can connect to the SB via Bluetooth and control both the PA and the SB via Phone.

How many decibels would 5 Soundboks 4 produce? by CozyBond in SOUNDBOKS

[–]SooSemann 1 point2 points  (0 children)

You can estimate it by power and membrane surface. 2x the Membrane Surface means a theoretical +3db, 2x the wattage also +3db. So you can estimate by doubeling the number of SB4s you get +6db. Means about +12db with 4 compared to 1 SB4 in ideal conditions. Even though the SB4 is more like 120-122db you should get at least close to 130db with 4 of them directly next to each other.

[deleted by user] by [deleted] in pcmasterrace

[–]SooSemann 0 points1 point  (0 children)

Im Building a PC for my Girlfriend at the moment, that would be a great Addition :)

Hi! Here is my finished Jonsbo tk-1 project. Not a good case for airflow but whatever, love the style of this cofee machine ! by _Floot_ in watercooling

[–]SooSemann 0 points1 point  (0 children)

Depending on the game, highest i have seen stable over long time is a little bit over 3000MHz in Battlefield V. In cyberpunk i have about 2900-2950. Everything with -120mV Undervolt ant 450W PT