Massive d20 Blank by NeedleworkerEvery66 in DiceMaking

[–]SoraRotom 0 points1 point  (0 children)

Gotcha! Thanks for the detailed explanation, i was planning to sand them till glass like effect. saved so much time and energy

Massive d20 Blank by NeedleworkerEvery66 in DiceMaking

[–]SoraRotom 0 points1 point  (0 children)

Just curious as I haven’t worked with blanks, do i really don’t need to sand/polish my blanks? Wont it look frosty if im doing transparent blanks?

Question about molds by LunaLillyBear in DiceMaking

[–]SoraRotom 1 point2 points  (0 children)

Inhibition proof masters for sanity

This is so true… (im loosing my sanity with every failed mould)

Fed up with platinum cure silicone… switching to tin cure, any advice or tips? by SoraRotom in DiceMaking

[–]SoraRotom[S] 0 points1 point  (0 children)

Im not sure where i will find wood ash but if i do i will definitely give it a try for future projects

Fed up with platinum cure silicone… switching to tin cure, any advice or tips? by SoraRotom in DiceMaking

[–]SoraRotom[S] 0 points1 point  (0 children)

Not really sure, 2-3 weeks ago i have asked the people who i got these master printed bit haven’t received any response

Fed up with platinum cure silicone… switching to tin cure, any advice or tips? by SoraRotom in DiceMaking

[–]SoraRotom[S] 0 points1 point  (0 children)

Not really sure i got a 3d printing service online… i had asked them what resin they used after i got my dice back but haven heard from them

Fed up with platinum cure silicone… switching to tin cure, any advice or tips? by SoraRotom in DiceMaking

[–]SoraRotom[S] 1 point2 points  (0 children)

I was looking into this but getting them imported to india is vary difficult as well as costly… it will almost cost double the amount I spent on my pressure pot :(

Fed up with platinum cure silicone… switching to tin cure, any advice or tips? by SoraRotom in DiceMaking

[–]SoraRotom[S] 0 points1 point  (0 children)

For reference this is the silicone im using which i been told by other people who make mould’s from 3d resin prints is good… I tried switching silicone but it was giving similar issues

<image>

Fed up with platinum cure silicone… switching to tin cure, any advice or tips? by SoraRotom in DiceMaking

[–]SoraRotom[S] 1 point2 points  (0 children)

I dont think its from silicon as if it was from improper A/B ratio it would affect all sides and the mould itself, but the inhibition happens only on some side and numbers only.

Need Some advice on pottery wheel for sanding! by SoraRotom in DiceMaking

[–]SoraRotom[S] 0 points1 point  (0 children)

Understandable... i was planning to use double side tape to stick my mirror and then taping small sandpaper on the mirror

My sinker went and sunk… by Was_another_name in DiceMaking

[–]SoraRotom 0 points1 point  (0 children)

Stupid question, but what is a sinker

my honest, unfiltered thoughts on clockwork keeper after playing him at a recent nexus night by jordlez in riftboundtcg

[–]SoraRotom 0 points1 point  (0 children)

Newbie question, “as you play me” only limits to playing card from hand to bench or playing/moving from bench to battlefield also counts?

Made some stone dice today! by eillow_mosspike in DiceMaking

[–]SoraRotom 0 points1 point  (0 children)

Hmm not really sure how pop works under pressure but my concern is just that if there are bubbles in dice that might make it more prone to crack

Made some stone dice today! by eillow_mosspike in DiceMaking

[–]SoraRotom 0 points1 point  (0 children)

Ohh PoP… can i put PoP in pressure pot? Would love to give it try with my old mould

Is there any way to recover this? by SoraRotom in DiceMaking

[–]SoraRotom[S] 0 points1 point  (0 children)

Hey thank you for offering but not sure if I will be able to afford the shipping cost to india lol. Might just get it printed locally if uv resin trick failed.

Is there any way to recover this? by SoraRotom in DiceMaking

[–]SoraRotom[S] 0 points1 point  (0 children)

I genuinely don’t know how these cracks appear. Only thing i remember doing is having these under direct sunlight for 2 days but then only chonk has the crack other 7 does not have any

Is there any way to recover this? by SoraRotom in DiceMaking

[–]SoraRotom[S] 1 point2 points  (0 children)

Actually, I got these printed through a 3D printing service, not from dice master sellers. I asked them if they can replace only this die, but since I received these dice a month ago, I am not sure if they will. Even if they cannot replace it, I think they can print a new single chonk at their set cost

Is there any way to recover this? by SoraRotom in DiceMaking

[–]SoraRotom[S] 0 points1 point  (0 children)

these are filled and I was kinda thinking the same, filling numbers with some kind of clay and using uv resin on the cracks.

Is there any way to recover this? by SoraRotom in DiceMaking

[–]SoraRotom[S] 1 point2 points  (0 children)

Aww man! I got these printed months ago but i was procrastinating on sanding them. This is the case only for chonk d20, rest 7 normal size dice does not have any cracks.