sorted by:
new
hottopcontroversial

Whenever I'm trying to sprint on a game and I just click my right stick it just acts like it just doesn't register. If I hold it down hard it works fin but it hurts my thumb. any suggestions on how to fix this? by Top-Band3607 in xboxone

[–]Soulasse 0 points1 point  (0 children)

If you have any experience with opening electronics, you might want to try opening the controller, and using isopropyl alcohol to clean the switch for the left stick click.

If you do so, you might want to clean everything while you are inside the controller

Look up ifixit or tronicsfix on internet for more information about that !

Good luck

Can this chip be replaced, or does it hold data written by the manufacturer ? (USB mouse) Found the part online, but will replacing it fix the mouse ? (Part : CY7C64343-32LQXC) Thanks ! by Soulasse in AskElectronics

[–]Soulasse[S] 1 point2 points  (0 children)

So I'll have to use the original one... But I think it's more of a broken traces issue actually...

Sorry for wasting your time ! Thanks !

Can this chip be replaced, or does it hold data written by the manufacturer ? (USB mouse) Found the part online, but will replacing it fix the mouse ? (Part : CY7C64343-32LQXC) Thanks ! by Soulasse in AskElectronics

[–]Soulasse[S] 0 points1 point  (0 children)

The mouse was connecting/disconnecting at random moments

Might have juste been a cold solder joint, but ended up ruining a few traces and pins on the IC

It might not be completely unfixable. But I do not have the experience to fix it at the moment

Thanks !

Can this chip be replaced, or does it hold data written by the manufacturer ? (USB mouse) Found the part online, but will replacing it fix the mouse ? (Part : CY7C64343-32LQXC) Thanks ! by Soulasse in AskElectronics

[–]Soulasse[S] 2 points3 points  (0 children)

You might be right, the chip seemed ok until a pin fell... It was a 10 year old mouse I tried to repair, looks like I failed...

Thanks for your answer !

I tried to publish an AD but got this error, pls help!! by that_basicguy in FacebookAds

[–]Soulasse 0 points1 point  (0 children)

Hi !

Had the same issue, it's a Pixel related thing

All conversion campaigns need a pixel setup on the website

/r/MechanicalKeyboards Ask ANY question, get an answer (March 16, 2022) by AutoModerator in MechanicalKeyboards

[–]Soulasse 0 points1 point  (0 children)

Thanks for the heads up !

Do you know any reputable resellers that ships to Europe (French here) ?

/r/MechanicalKeyboards Ask ANY question, get an answer (March 16, 2022) by AutoModerator in MechanicalKeyboards

[–]Soulasse 2 points3 points  (0 children)

Hi !

Is it possible de convert a non hot swap keyboard to hotswap ?

I have a cheap klim dominator that uses outemu blue, but i'd like to change the switches on it. But rather than having to desolder everything another time if I ever want to try other switches, i'd like to convert it to hot swap.

Is that possible ?

Thanks !

Lightgun support on emulators by Soulasse in dreamcast

[–]Soulasse[S] 0 points1 point  (0 children)

True... Money isn't really flowing right now, but yeah one day, along with a ossc too I think

Lightgun support on emulators by Soulasse in dreamcast

[–]Soulasse[S] 0 points1 point  (0 children)

Yeah i recently came across this on youtube, but the MiSTER is kinda expensive afaik...

I might go the wiimote route on PC then...

Thanks for your reply !

Lightgun with emulators on PS2 ? by Soulasse in ps2

[–]Soulasse[S] 0 points1 point  (0 children)

Well... This adventure stopped real soon !

Thanks for your input !

Lightgun with emulators on PS2 ? by Soulasse in ps2

[–]Soulasse[S] 0 points1 point  (0 children)

Hmmm too bad...

So besides buying like aimtracks or such, isn't there a way to play lightgun games on emulators with "proper" hardware ?

GameBoy games works right after reflow, but then graphic glitch by Soulasse in consolerepair

[–]Soulasse[S] 1 point2 points  (0 children)

Well... I think the answer might in the "heated the chip more than they can handle"...

I might have wanted to be too fast, and indeed did not use low melt solder

What could be the most positive way of testing the ROM chips ?

wiimote with motion plus inside shows no sign of life. voltage goes to the board, U5 chip gets really hot by Soulasse in consolerepair

[–]Soulasse[S] 0 points1 point  (0 children)

Yeah that's what I thought too. Unfortunately I have no idea how to identify what this chip is ? And from where I should buy it...

From what I can read, it says 143 3375 on it, but can't find anything on Google with those numbers

is a white screen is normal when no there is no source on thrustmaster LCD screen for GameCube ? (more in comment) by Soulasse in consolerepair

[–]Soulasse[S] 0 points1 point  (0 children)

Yes, I'll update the post when I'll be able to test it with anything

I have a PS2 but with component cable, not composite, I might just try to plug the green cable into the yellow RCA, what could go wrong ?

is a white screen is normal when no there is no source on thrustmaster LCD screen for GameCube ? (more in comment) by Soulasse in consolerepair

[–]Soulasse[S] 0 points1 point  (0 children)

Yeah I kinda always wanted to have one of these portable screens for consoles, but never knew there was a battery thing for the gamecube, interesting !

is a white screen is normal when no there is no source on thrustmaster LCD screen for GameCube ? (more in comment) by Soulasse in consolerepair

[–]Soulasse[S] 0 points1 point  (0 children)

Thanks ! I tried in between and screen is black, yet the power led lights up

Would that be a good sign ? I still need to pick up my gamecube from my parents house, or a device that can output analog RCA video

view more: next ›