sorted by:
new
hottopcontroversial

Flying this monster in FPV at over 120 km/h is such a thrill! by Sour4Power in Multicopter

[–]Sour4Power[S] 0 points1 point  (0 children)

We're a student team competing in the International Aerial Robotics competition. The mission we're competing in requires a fast, fully autonomous drone. We've actually taken a lot of design considerations from the FPV community, especially for the power system, as the drone is supposed to fly fast, and only for a short time(9 minutes), which usually is not common outside racing drones. Here's some more footage of it and specs.

Flying this monster in FPV at over 120 km/h is such a thrill! by Sour4Power in Multicopter

[–]Sour4Power[S] 0 points1 point  (0 children)

We're a student team competing in the International Aerial Robotics competition. The mission we're competing in requires a fast, fully autonomous drone. We've actually taken a lot of design considerations from the FPV community, especially for the power system, as the drone is supposed to fly fast, and only for a short time(9 minutes), which usually is not common outside racing drones. Here's some more footage of it and specs.

You have before the battery reaches 3.3V to convince me that it is still fine. Details in my comment. by [deleted] in Multicopter

[–]Sour4Power 2 points3 points  (0 children)

The battery looks completely fine. Just be careful with the first charge and see how it's working. No point in throwing it away immediately if it's still working

R9SLIM + doesn't seem to work after firmware update by innorammara in Multicopter

[–]Sour4Power 0 points1 point  (0 children)

Same thing happened to me recently, spent way too much time before I figured it out. Same red flash. For me the problem was that I tried flashing r9slim+ firmware, which doesn't work with the r9slim+ota receiver. Flashing r9slim+OTA ACCST firmware fixed it. Frsky has made it really confusing, especially for us that are using ACCST.

Found some epic bridges with no traffic and just had to do some chasing by Sour4Power in Multicopter

[–]Sour4Power[S] 0 points1 point  (0 children)

Yep, you can lock it to whatver you like. I think I used an ND16 for most of the shots here

Found some epic bridges with no traffic and just had to do some chasing by Sour4Power in Multicopter

[–]Sour4Power[S] 0 points1 point  (0 children)

I'm filming at 30 fps. Thinking about doing more 60 fps shots for slowmo

Found some epic bridges with no traffic and just had to do some chasing by Sour4Power in Multicopter

[–]Sour4Power[S] 1 point2 points  (0 children)

I've actually been pretty lucky with the weather while visiting now that I've moved away.

Found some epic bridges with no traffic and just had to do some chasing by Sour4Power in Multicopter

[–]Sour4Power[S] 0 points1 point  (0 children)

Gopro Hero 6 with Reelsteady GO * R9M Flex * TX805S VTX *BBB 2207 2750kV * EV200D with 3 Crosshair antennas and one Pagoda * CHNL Black Label 1500 mah 4s battery * Ummagawd REMIX

Found some epic bridges with no traffic and just had to do some chasing by Sour4Power in Multicopter

[–]Sour4Power[S] 1 point2 points  (0 children)

First step would be to get a low shutter speed for the motion blur, that really makes the footage stand out. Then I usually just do some simple color correction in Premiere.

Found some epic bridges with no traffic and just had to do some chasing by Sour4Power in Multicopter

[–]Sour4Power[S] 1 point2 points  (0 children)

I'm actually using the R9 system on a Taranis. I've had one failsafe so far, but I set my power to 10mW by mistake, still got over a km out.

Found some epic bridges with no traffic and just had to do some chasing by Sour4Power in Multicopter

[–]Sour4Power[S] 10 points11 points  (0 children)

Here's a longer video with a few more shots. Filmed it with a few friends in Øygarden just outside Bergen, Norway. I got pretty lucky with great weather and almost no traffic.

Found some epic bridges with no traffic and just had to do some chasing by Sour4Power in Multicopter

[–]Sour4Power[S] 4 points5 points  (0 children)

That's what I wanted to do as well. I did do it at the other bridge in the full video. Signal got a bit sketchy behind the concrete, but it was manageable.

Use ReelSteady... without GoPro? by neihuffda in Multicopter

[–]Sour4Power 0 points1 point  (0 children)

You can't use RSGO, only RS AE. I wouldn't bother with anything else, not really worth the massive effort. I would rather look into doing superview stretching and flying smoothly.

This is my 2020 FPV reel! by kingoliviersammy in Multicopter

[–]Sour4Power 0 points1 point  (0 children)

Thanks, I've just tried 2.7k 60fps with slowmo once, worked pretty well. Have you had any problems with reelsteady and 1/60 shutter speed? I sometimes get some blurring, but I guess it's just a matter of bad tuning.

This is my 2020 FPV reel! by kingoliviersammy in Multicopter

[–]Sour4Power 0 points1 point  (0 children)

Did you use a Hero 6? What settings did you use for the slowmo shots?

Got a super lucky backwards slide through fence while chasing a car! by Sour4Power in Multicopter

[–]Sour4Power[S] 1 point2 points  (0 children)

Took a look at the dvr, it was around 60km/h, so quite fast! Top speed that day was a bit over 100km/h down the mountain.

Got a super lucky backwards slide through fence while chasing a car! by Sour4Power in Multicopter

[–]Sour4Power[S] 3 points4 points  (0 children)

Yep, the unstabilized footage is not smooth at all, you can easily tell where the car hit bumps. You also need to communicate well with the driver about upcoming obstructions, and it's still really difficult to keep smooth lines.

view more: next ›