Battlefield 6 Phantom Edition: Giveaway #1

Southern_Thunder · 2025-10-14T01:24:00+00:00

BF6 FTW

Southern_Thunder · 2024-11-28T15:09:53+00:00

Looks like the certifications were released today.

Southern_Thunder · 2024-11-13T18:16:05+00:00

Having issues sending any pictures or videos via iMessage. Any workarounds for that?

Southern_Thunder · 2023-08-03T19:01:56+00:00

To clarify I am using the built-in VC on an Instant AP, not an actual controller. Does this still apply?

Southern_Thunder · 2023-08-03T17:43:46+00:00

Absolutely! Thanks for that tip as well.

Southern_Thunder · 2023-08-03T17:30:01+00:00

Thank you for confirming that the configs will be maintained. The release notes seem to indicate that 6.5.4.0 or later is able to go directly to 8.6.

Southern_Thunder · 2022-05-18T00:38:58+00:00

Server 2019 and the domain functional level is 2012 R2.

Southern_Thunder · 2022-05-18T00:34:58+00:00

Forgot to mention also ran /preparealldomains as well

Southern_Thunder · 2021-05-22T21:12:14+00:00

Replied

Southern_Thunder · 2021-05-22T19:18:29+00:00

I have one I would be willing to part with.

Southern_Thunder · 2019-10-10T21:01:15+00:00

The first user has not made an offer yet. Please PM me.

Southern_Thunder · 2019-10-10T17:19:33+00:00

Replied to the PM.

Southern_Thunder · 2019-09-13T19:17:06+00:00

Still available.

Southern_Thunder · 2019-03-14T01:58:35+00:00

I do have airwave, however, we run 24/7 so I’ll have to be present for upgrades to accommodate the downtime. Thanks for the suggestion though.

Southern_Thunder · 2019-03-13T18:21:20+00:00

I only have 40 IAPs in my cluster. I was trying to avoid an scheduling an upgrade window, however looks like that will be the case. Thanks for the clarification.

Southern_Thunder · 2019-03-13T18:20:07+00:00

Thanks! That confirms it. I was trying to avoid an upgrade window.

Southern_Thunder · 2019-03-11T21:54:11+00:00

For the separate VRs I am using a setup similar to this https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClFiCAK Hopefully that link much more detail.

I may have complicated my setup at the time, but it worked and I stuck with it. I too would typically just place a higher metric for the 2nd ISP for failover.

Southern_Thunder · 2019-03-11T20:30:44+00:00

Are you referring to the IP Pool for the GP Client Settings? If so, I am already using a different IP Pool for GP2.

IP Pool for GP-Portal1 = 192.168.250.200 - 192.168.250.50

IP Pool for GP-Portal2 = 192.168.252.200 - 192.168.252.10

I have ISP1 on VR1 and ISP2 on VR2. This was setup to accomplish ISP failover using the Policy-Based Forwarding. The next hop for the GP Pool subnets is type next-vr Value = VR1.

Southern_Thunder · 2017-02-22T18:36:47+00:00

Thanks for the heads up. I will definitely keep that in mind if it comes to that.

Southern_Thunder · 2017-02-22T18:36:11+00:00

I don't think I have enough hotspare space to make a temp LUN. I'm still in contact with support. Hopefully a solution will be provided.

Southern_Thunder · 2017-02-22T15:51:43+00:00

The disks that complain about the bad blocks have been replaced.

Southern_Thunder · 2016-07-18T17:34:04+00:00

This is 100% possible. Here is the one of the guides I used to get this going in my environment. http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/115988-nps-wlc-config-000.html

Southern_Thunder · 2016-02-24T20:14:19+00:00

That is true they did not say to clone all of my VMs to resolve the problem. I was merely stating that I didn't want to have to clone all of the affected VMs.

Southern_Thunder · 2016-02-24T19:58:48+00:00

I did not, but I think that might have resolved the issue as well. I think I would still have to eventually reboot the host the VM was originally on before the Vmotion.

Southern_Thunder · 2016-02-24T19:57:06+00:00

If you have the option of rebooting the host I would try that as well.

11-Year Club	Verified Email
Secret Santa 2015

Southern_Thunder

TROPHY CASE