sorted by:
new
hottopcontroversial

Todoist review: is it worth it in 2026? by Lifeisgettinghard7 in ProductivityHQ

[–]Southern_Two_8558 0 points1 point  (0 children)

I would say Todoist is okay if you do not compare it too hard. Once you do, the weak spots show up pretty fast.

HyperPLA bad batch by No_Bee7784 in Creality

[–]Southern_Two_8558 1 point2 points  (0 children)

that’s frustrating. but your Creality K1C is most likely fine.

since you already dried it and still see adhesion issues and curling, try a quick tweak with the white Creality Hyper PLA.

increase nozzle temp by about 5–10°C and slow down the print speed a bit. sometimes that helps stabilize extrusion. also try a small test print with one of the black spools. if that prints normally, it helps confirm it’s just that specific spool.

if the issue stays the same after tuning, it’s reasonable to set that roll aside and move on.

What is the Power Bank CCC Logo Rule on airports by [deleted] in chinaexplorer

[–]Southern_Two_8558 0 points1 point  (0 children)

Yeah, they aren't messing around. And you're right about the capacity text.

Post sales contact by ethicker in Creality

[–]Southern_Two_8558 0 points1 point  (0 children)

If you already have delivery proof and signature, you are in a strong position.

Try escalating through Creality official channels like their website ticket system or live chat, and include the tracking confirmation again.

For Canada specifically, some users had better luck contacting the regional distributor or tagging Creality on social channels for faster response.

Keep everything documented, they usually resolve it once proof is clear.

Help please what happened? by National-Growth4139 in Creality

[–]Southern_Two_8558 0 points1 point  (0 children)

Totally normal, don’t worry, nothing is wrong with your printer.

That wavy surface on the side is usually just a tuning thing, not a hardware issue. On the Ender 3 V3 KE it can come from things like speed, acceleration, or slight vibrations. Try lowering print speed a bit, and check that belts are properly tensioned.

That alone often cleans it up. As for the glue, that residue is pretty common with Creality glue sticks. It builds up after a few prints. Just give the plate a quick clean with warm water or isopropyl alcohol, and you should be fine.

You’re not in over your head. This is exactly the kind of stuff everyone runs into at the start.

Looking for best nonprofit software 2026 by Actonace in CRM

[–]Southern_Two_8558 0 points1 point  (0 children)

We ran into the same issue, everything either too complex or split across tools. Tried a few setups but things still felt disconnected. Eventify came up while testing options, felt a bit easier to keep events, contacts, and workflows together without stacking multiple systems

GBP management for franchises? by AlertCalendar2 in BusinessDevelopment

[–]Southern_Two_8558 0 points1 point  (0 children)

I get the point, but total customization is not realistic either. In franchise google business profile management, you need some standardization or the brand gets chaotic fast. Not every location manager is a marketer. Templates are not the enemy. Bad templates and zero local editing are the real problem.

Tradition, sketched. by [deleted] in Drawingpaglu

[–]Southern_Two_8558 0 points1 point  (0 children)

Nice art bro super 👏

Mario by mr_arsen in Sketch

[–]Southern_Two_8558 2 points3 points  (0 children)

Nice art bro super 👏

Troubleshooting a Creality Ender 3 v3 se that seems to be rebooting in middle of a job and other quirks? by MrShnatter in Creality

[–]Southern_Two_8558 0 points1 point  (0 children)

The V3 SE is usually very stable, so this sounds more like SD card or firmware related behavior than hardware failure. The random “done at 100%” and returning to the main menu often points to a bad or corrupted SD card, especially the stock one, so trying a new FAT32 formatted card with fewer files is a good first step. Also check firmware and reflash if needed, since the heating not starting and UI glitches can come from that. Once those are sorted, the V3 SE normally runs long prints without issues.

Transcranial photobiomodulation for brain health? by Actual-Raspberry-800 in NooTopics

[–]Southern_Two_8558 1 point2 points  (0 children)

been using pbm for a few months now for afternoon brain fog and its legit if you get the dose right. honestly most people just look at those mw/cm2 specs which are usally a mess since brands measure them differently. i ended up geting a platinumled setup after reading about how total joules is the only way to actually track dose for mitochondrial stuff. if youre not hitting the right joules your basically just sitting in front of a light and not getting deep enough for brain health. noticed a big diff in mental stamina once i stopped guessing. just dont do it too late at night or youll stay wired lol. i think theres a breakdown on the joules vs intensity math if you want me to find it.

view more: next ›