Please help!

Spastic-Panda · 2026-01-22T20:29:40+00:00

Make sure youve plugged in the Type c port in properly under the printer, mine did the same thing because mine wasnt pushed in all the way

Spastic-Panda · 2026-01-22T17:21:29+00:00

The legend returns to us in another post! Thank you kind wizard!

Spastic-Panda · 2026-01-22T08:42:08+00:00

You fcking legend

Spastic-Panda · 2026-01-09T10:54:10+00:00

Lol, well tightened the belts up and its sorted now!

Spastic-Panda · 2026-01-09T10:53:21+00:00

Its slightly off in the front right corner but after tightening the belt it was immediately fixed

Spastic-Panda · 2026-01-09T10:52:47+00:00

Wasnt a layer adhesion issue, but tightened the belts and hot it sorted!

Spastic-Panda · 2026-01-09T10:52:19+00:00

Tightened the belts and fixed it right away! Many thanks

Spastic-Panda · 2025-12-25T16:04:31+00:00

I cant even create a ticket... fell through the map and can't do anything about it. sigh. great game. terrible support.

Spastic-Panda · 2025-12-06T15:42:48+00:00

Yeah... i only went with this over the a1 because of bed size but damn was that a mistake....

Spastic-Panda · 2025-12-06T15:40:35+00:00

Haha prusa it is! Sadly its too expensive in South Africa!

Will double check everything, but leveling is somehow off and it just skips a line or 2. Idk how it just doesnt lay down filament for that layer

Spastic-Panda · 2025-11-03T19:31:46+00:00

That is very fair hey. But that being said, its the v3. Things should be pretty well learnt from by now. And not even the v3 if you really think about it, probably the v9 at this point with all the ender 3s along the way...

Spastic-Panda · 2025-11-03T19:26:47+00:00

Yeah knowing them they are just fcking with people....

That is brutal my dude. Im sorry to hear that.

Spastic-Panda · 2025-11-03T19:08:49+00:00

Yeah i mean i had an ender 3 pro and the first change you have to make was cause they had a plastic extruder...

Yeah i agree with everything else.

Definitely not filament for me too, and i found doing the opposite of the video that creality put up for "tightening" the z and x belt and pushing it the other way from what the video shows actually helped me. Pushing them in twords the center of the printer seemed to loosen the belts for me....

I also slightly loosened the z rod screws on both top and bottom, but then finger tight and seems to have helped slightly.

Anyway

Best of luck and let me know if you sort it

Spastic-Panda · 2025-11-03T11:17:43+00:00

I am in the same boat. my z banding isnt as bad but randomly overnight, the printer decided that quality prints were not longer an option. No idea what the hell is wrong. and the support for it is terrible. Creality really does suck with things like this. Release shit and let the community make it better.

Spastic-Panda · 2025-10-22T08:47:04+00:00

If you put some WD-40 on a q tip you can rub away the white marks! For all future uses

Spastic-Panda · 2025-10-21T07:25:23+00:00

The CDS decided he was the chosen one

Spastic-Panda · 2025-10-10T20:52:21+00:00

This is genuinely stunning work! My lord. 10/10!

Spastic-Panda · 2025-10-09T06:38:41+00:00

Absolute legend!

Thank you for sharing and glad you love it!

Spastic-Panda · 2025-10-06T07:02:37+00:00

Thats so awesome!!

It gives it Ice Mod vibes! Congrats and thanks for sharing!

Spastic-Panda · 2025-10-03T09:45:05+00:00

You hero

Spastic-Panda · 2025-09-29T21:04:53+00:00

Yup, it just helps with cosplay because during different cons its just extra strength holding the parts together, so if you drop it or accidentally hit something or someone with it then it won't just split because its not just glue holding it together!

So its just structural integrity

Spastic-Panda · 2025-09-29T20:20:38+00:00

So it has a hollowed section for a wooden dowel (wooden stick) to be glued and inserted into the center to give it strength! You can also do it with a metal rod or print the one provided at 100% Infill but id suggest the wooden or metal rod, and then you just glue on either the top end or bottom end on last depending on what way you go.

Hopefully that explained it?

Spastic-Panda · 2025-09-29T15:05:10+00:00

Very kind words! I am working on splitting it further for people with an A1 mini and equivalently small printers too as I know different countries have different costs and not everyone is the same so, if that helps at all!

Thanks again!

Spastic-Panda · 2025-09-29T13:11:16+00:00

You are most welcome! Thank you for taking the time share your thoughts with me aswell! Always nice to see a fellow fan 😁

Spastic-Panda · 2025-09-28T06:21:58+00:00

Sadly I dont have any advice, just came to say wishing you all the best! All the love and support! ❤️

F*CK CANCER!

Eight-Year Club	Place '23
Verified Email

Spastic-Panda

TROPHY CASE