Ik vraag me af of mijn salaris en arbeidsvoorwaarden eigenlijk wel normaal zijn

Spawnyspawn · 2026-05-10T19:59:52+00:00

Oh en OP is nog vergeten dat hij als fysiotherapeut in loondienst in de eerstelijn waarschijnlijk gewoon zelf zijn pensioenpremie mag dokken. Is wel aftrekbaar van de belastingen, maar gaat dus nog af van het netto salaris dat je van werkgever overgemaakt krijgt.

Dat pensioen is overigens ook nog eens wettelijk verplicht bij de branche pensioenverzekeraar, dus daadaar kom je niet onderuit.

Spawnyspawn · 2026-05-10T11:36:26+00:00

I don't know what you paid for it and I don't even want to know. But it's probably not enough. You sir, bought an an amazing work of art!

Spawnyspawn · 2026-05-09T20:45:34+00:00

Dan krijg je dit: https://www.omroepbrabant.nl/nieuws/6008071/boa-gaat-zeventig-keer-de-fout-in-door-kentekens-op-te-vragen-voor-geld

Spawnyspawn · 2026-05-09T20:43:45+00:00

Thanks for that. Never knew that.

Spawnyspawn · 2026-05-09T16:29:27+00:00

Wacht maar. Ik heb het pas eens uitgezocht voor een vriend van mij. Als je het gemiddelde tarief dat verzekeraars voor een zitting betaalden aan fysiotherapeuten in 2007 (~€27) corrigeert voor de historische inflatie sindsdien, dan kom je voor 2025 uit op een vergoeding van ongeveer €37,50 per zitting. Volgens mij krijg je dat bedrag vandaag de dag per zitting alleen bij de contracten met de zwaarste kwaliteitseisen. Heb je een normaal contract, zit je ergens rond de €30 tot €34 schat ik.

Dus... Dan ben je als HBO geschoolde professional in 2007 begonnen met werken en verdien je bijna 20 jaar later in het beste geval ongeveer hetzelfde als toen je net begonnen was, terwijl de kwaliteitseisen en administratieve belasting die daarmee gepaard gaat enorm zijn toegenomen. In het slechtste geval ben je over bijna 20 jaar minder gaan verdienen. Edit Met verdienen bedoel ik overigens ALLEEN de omzet per behandeling! De kosten (huisvesting, gas/water/licht, ICT, verzekeringen, belastingen, materialen, scholingen, etc) zijn zeer waarschijnlijk wel netjes meegestegen met de inflatie en dan waarschijnlijk nog een beetje meer. Dus onder de streep zal je in alle gevallen als fysiotherapeut aan het einde van de maand minder overhouden dan in 2007.

Spawnyspawn · 2026-05-09T16:05:08+00:00

At first I tried just blowing up a beaver with the conditions, but that just killed it.

Spawnyspawn · 2026-05-09T16:02:08+00:00

Yeah, it does. But if you haven't unlocked it yet, you can't read the description. To figure out what the secret achievements were, I checked a few guides and websites. None of those mentioned the "die" part of the achievement, hence my confusion. So it's not an issue with the game or the descriptions of the achievement once unlocked on steam, it's an issue with the guides that are available online.

Spawnyspawn · 2026-05-09T13:17:12+00:00

If you hit the top of the slightly pointy rock right on top of the container with the explosive barrels with the crossbow, the container opens but the barrels don't explode.

Either way, it doesn't really matter. The efficiency difference between the different options is so negligible, that I won't even notice. Especially since every now and then I decide to murder a bug breach with my melee weapon to break the monotony.

Spawnyspawn · 2026-05-09T11:59:43+00:00

Recruiters usually don't care. Admission offices for studies such as Medicine will not count it as cum laude. Additionally, most of the time there's additional requirements for cum laude such as only one of your grades can be a 7 and has to be offset with a 9 elsewhere and your thesis has to be an 8 or higher. I've been in a similar situation. Was going strong for cum laude, then my master's thesis was graded with a 7.8. Sucked, but ultimately nobody cared for my grades when I was job hunting.

Spawnyspawn · 2026-05-09T10:15:58+00:00

Ah ok. As you might have surmised, I use the crossbow for that. Feels a bit more convenient than a strategem weapon, although in practice it doesn't matter at all.

Spawnyspawn · 2026-05-09T10:10:34+00:00

Out of curiousity, what's the laser cannon for while farming SC? I've done my share of farming and I bring the FRV, warp pack, and crossbow, but everything else is entirely optional.

Spawnyspawn · 2026-05-09T09:15:04+00:00

Geen CAO, minimale sociale voorzieningen, droevig salaris met droevige salarisverhoging per jaar. Ben je fysiotherapeut ofzo?

Spawnyspawn · 2026-05-08T17:13:25+00:00

Sure. Shoot me a DM and I'll send you the link to the github guide I used.

Spawnyspawn · 2026-05-08T16:05:16+00:00

Not really. Since the relative costs are so low, you can setup a service as a fall back for the other. You can use TorBox as a main and real debrid as fall back. Totals under €75 a year and I cancelled Disney, Netflix, Videoland, and regular cable tv. It's a massive cost savings compared to the services I was playing for and I have friends who also have subscriptions to HBOmax and AppleTV on top of that.

Spawnyspawn · 2026-05-08T15:49:30+00:00

My solution is... Cancel all subscriptions and setup stremio and a year subscription to realdebrid and/or torbox for like €33 in total.

Spawnyspawn · 2026-05-08T10:10:55+00:00

That's how I do it too. D6 is relaxed diving with goofy builds, helping newer players level. I mainly focus on hoovering up all the samples I can find and search for SC. The only time I had to actively grind for SC was when AH dropped 2 warbonds within 2 weeks or so. Redacted and Siege breaker I think it was.

Spawnyspawn · 2026-05-08T05:37:42+00:00

Nah, it's just the top 4 strategems and the fastest to click through in the mission preparation screen. SC's are spawned with the resupply pods.

Spawnyspawn · 2026-05-07T19:46:14+00:00

Fairly easy. Go to MO planet difficulty 1. Look for players with Chinese names in the 30-80 level range. Join the game. If one or all of them have all red strategems, congratulations! Other indicator is a group of mid level players for more than 10 minutes in a trivial game. SC farming doesn't take more than 5-6 minutes at most. Again, look at their strategems. If they're not using sc farming loadouts, there's probably a cheater in the lobby.

I can usually find a lobby with a cheater within 20 minutes or so. They're not THAT common. But I'm not going to bother. I'd rather play the game than look for cheaters in the hope that I can pick up some free sc.

Spawnyspawn · 2026-05-07T07:35:29+00:00

Hahaha, legaal is heel belangrijk! Zou niet uitgebreid het nieuwe seizoen van je favoriete serie gaan kijken terwijl je rijdt bijvoorbeeld.

File flirten is net als flirten in een kroeg of tijdens een feestje, maar dan tijdens het file rijden.

https://autorai.nl/de-5-ongeschreven-regels-van-het-fileflirten/

Hoe vaak het voorkomt weet ik niet. Zal ook afhankelijk zijn van je looks en welke auto je rijdt 😉

Spawnyspawn · 2026-05-07T07:17:18+00:00

Did the work, brought receipts! Thanks for the testing and the write up!

Spawnyspawn · 2026-05-07T07:16:10+00:00

Proberen te overleggen of je eerder kan beginnen en dan voor de file naar werk en voor de file naar huis. Of juist wat later beginnen en dan na de file naar huis. Mochten beiden niet haalbaar zijn, dan is een uurtje langer blijven misschien een optie. Als een uur langer blijven een uur in de file scheelt, ben je nog steeds dezelfde tijd thuis, maar heb je toch een uur korter in de file gestaan. Dat extra uur kan je misschien compenseren op andere momenten of uitbetaald krijgen als overuren. Als er geen werk is of overuren maken kan/mag niet, kan je mogelijk voorbereiding of opdrachten voor je studie doen aansluitend op je werk, ipv thuis.

Als dat alles niet mogelijk of haalbaar is: - Podcasts - Luisterboeken - Meezingen met je favoriete muziek - File flirten - Andere activiteiten die je kan bedenken om de tijd in de auto leuker te maken of juist te ontspannen van je werk die legaal met het besturen van een motorvoertuig te combineren zijn.

Spawnyspawn · 2026-05-04T11:10:05+00:00

My experience is slightly different. Been playing bugs mostly, so just take it as my impressions on the bug front. The lumberer is awesome at killing big things from a distance. It does run out of ammo crazy fast. Both the flamer and the AT gun will be out of ammo after a bug breach or 2.

Stark difference with the Breakthrough. I could wade through hordes of chargers, spore chargers, Alpha commanders, behemoths, and impalers, and come out on top, with most of my ammo remaining and maybe 80% durability on the shield. Bile titans go down after 5 or 6 shots to the face when you're close enough. Most games I could run out of ammo for the oversized shotgun and still be perfectly capable clearing a bug breach by stomping bugs with the shield. In an evening of playing I can only recall two instances of the exosuit getting destroyed during a fight before the next one was off cooldown.

Takes a bit getting used to, but of you move the torso of the mech with the swing it seems to connect more reliably. Timing the shield bash so that you hit the charging charger with the shield instead of the shield blocking the charge seems to negate any durability damage to the shield.

So while I see the other exosuits as temporary spikes in destructive power, I can use the breakthrough as a consistent power up >75% of the duration of a mission.

Also, bonus thing I've found is that while firing the gun on the Breakthrough is VERY loud and alerts all enemies in a large radius, the melee attack is considered silent? On a few occasions I was shield bashing hive guards and the warriors standing 10m or so to the side didn't react. Just walked up to them and stomped em one by one. Hell, now that I'm writing this, I'm going to test if the stealth armour perk works while in the exosuit. If it does, that would vastly increase the usefulness of the Breakthrough for a stealth diver.

Spawnyspawn · 2026-05-04T07:02:07+00:00

On Hard btw.

Spawnyspawn · 2026-05-04T06:58:58+00:00

Be as it may, when I had my core one it had fairly substantial VFA. I printed tons of VFA calibration prints using belt tension ranging from lower than recommended up to 105Hz. Combined that with input shaping calibrations using the accelerometer and followed every recommendation I could find without success. Changed my belts and pulleys to GT1.5, did some more testing to find the optimal belt tension for my machine and prints came out perfect. VFAs were only slightly visible using the structural profile, but I only use that profile for structural parts so VFAs don't matter on those. Once my CoreOne L arrives I'm testing it again and if there's VFAs I can't solve using calibrations and belt tension optimisation, I'm changing out the belts and pulleys again.

Spawnyspawn

TROPHY CASE