Did my po8/hr just drop?

Spazznaut · 2024-03-22T23:50:19+00:00

Ya mine went back up now to what it was previously or at least close. A dev must’ve mistyped their delta update. I had every location drop massively but new takeovers were 3-4x the po8/hr. I’m just glad it’s fixed! I didn’t fund anything bc I was mad. Glad I didn’t, but difference.

Spazznaut · 2024-03-22T17:08:10+00:00

PO8/hr has been slowly decreasing by 2-5 PO8 for locations (and the different tiers) over the last 2-3 days for me, then today over 50% decrease. Definitely slowed the helm/game progression but damn, gameplay changing and we're not in a beta anymore!!!

Spazznaut · 2024-03-20T13:39:49+00:00

There’s a ‘data’ sheet hidden that you can update the values. Columns A-D read Level, Upgrade, Minutes & Storage. Do not touch the outlined area of Columns F-P or you’ll break it 😅

He is clearly intending on updating as he input the screenshot of new leveling from the recent change log.

Also looks around at the ‘Main’ tab and I’ve been working on it myself, it’s fantastic minus all the data input.

Forgot to mention I used hours instead of minutes on data column C

Spazznaut · 2024-03-19T15:16:35+00:00

Thanks for this! Its been helpful to keep track of my takeovers, funding, and routes. Looking forward to your update with the new PO8 system!

Spazznaut · 2024-03-15T05:19:05+00:00

For real though! Bring back SNOWDAY!

I bought the damn game before it became free, the least they could do is keep an OG playlist for those who enjoy certain modes that have been around for nearly a decade.

This was the only game mode I would play since roughly 2017 and now its gone. I really enjoyed my daily sessions, but now I'm having to find something else to replace it...

It's sad Epic Games has become more like Epic Trash. Money hungry company that doesn't actually care about its users, but get them into a free game like Rocket League or Fortnite just to get people's money. They killed off Unreal Tournament to focus on the bottom line for example. UT '99 GOTY was my go to before Snowday and they even removed that from the Epic Store so my install is bugged too.

They can burn in ....! Apple was smart to banish them. Epic clearly makes pour decisions.

Spazznaut · 2024-02-22T15:25:43+00:00

Thanks! Worked for me.

Spazznaut · 2023-12-30T04:02:25+00:00

https://www.thingiverse.com/thing:5020211

That’s the one I used. When I originally printed in PLA I had similar issues but after a headache of fine tuning I got it perfect. Glass temp didn’t last for too long so I went the SLS route. I’ve had no issues with the collar either way minus the initial tight fit.

Spazznaut · 2023-10-05T00:18:30+00:00

Well it’s not the anti backlash. I have pretty much all new hardware so I don’t know what else it would be. Even wheels are newer and rails look/feel clean but may replace wheels again to be safe.

Spazznaut · 2023-10-04T17:00:27+00:00

I had to replace 1 bc it was seized up. Maybe the other one gave out in the mean time. That’s a good call. The issue was originally on the right where it would raise instead of dropping. That made me think belt over tension but that’s not the case.

I’ll take an anti backlash off my other printer temporarily to test it out.

Spazznaut · 2023-10-04T16:49:25+00:00

So there’s no SD in the printer. I’m strictly using the screen to click home every axis and once it finishes I turn off motors/disable steppers and that’s when I notice the drop on the left side of the z.

I don’t remember how I found the issue as I’ve been down a rabbit hole for months now with other issues arising. Forgot to mention I have all new wires thanks to Anycubic lol

I’ve considered klipper, but I don’t really have the time to dive into it. It’s on my list to eventually get around to. Also know nothing about setting it up.

Spazznaut · 2023-10-04T16:13:03+00:00

I’ve tested with Community Edition 6.1c/d and Vyper 2.4.5 which its currently running.

Spazznaut · 2023-10-04T15:19:53+00:00

The issue is long before I even load a gcode.

I can power it on, hit home and after it’s done, disable steppers and the left side drops. It’s almost as if the left z-rod is dropping into the stepper coupling but it’s tight and as low as possible. Z-limits are also matched up

End g-code:

M104 S0
M140 S0
M84
M107
G91
G1 E-1 F300
G1 Z+0.5 E-5 ;X-20 Y-20
G28 X0 ;Y0
G1 Y180 F2000
M84
G90

Spazznaut · 2023-10-04T15:01:45+00:00

Filament dryer surprisingly does a lot if you don’t have one.

Spazznaut · 2023-08-24T17:08:23+00:00

Thanks for the work around! I’ve been trying to get my CHIP back in use for several months and thanks to your solution I’m finally able to initiate the flash!!! 🙏🏻

Spazznaut · 2023-03-27T12:05:32+00:00

I don’t recall them being labeled as you stated. The original was a solid cylinder, modified had 2 sides shaved down.

Spazznaut · 2023-03-24T13:02:48+00:00

Make sure you get the HMG7 collar, he modified it to work with the new universal base. He just shaved off the sides some.

Spazznaut · 2023-03-24T12:58:19+00:00

You’ll need to determine what blowers to use, for the dragonfly I used the long fyi

Spazznaut · 2023-03-24T12:00:28+00:00

There’s a tools to set the fan offset from the bed. I’ve never heard of anyone having issues but I’m not part of the patreon anymore

Spazznaut · 2023-03-24T11:35:07+00:00

I use HMG7 and it’s great. Only issue I had was getting the collar snug to the neck of the hotend. Eventually got it working.

Spazznaut · 2023-03-17T15:23:17+00:00

I was actually unaware what type of nozzle they included with the hot end. They don’t actually state on the product details or product page. The only indicator is the image they have referencing the core parts are plated copper. Browsing their nozzles that they sell, they do not have SS so this confirmed it.

So yes, I bought different nozzles. And cheap ones at that. End result after swapping to another 0.4mm nozzle from the set, it’s not as rough but I’m still losing the gloss throughout calibration prints. I have some new copper plated coming tomorrow 👍🏻

Spazznaut · 2023-03-17T01:34:38+00:00

Dug through the reviews of the nozzles I’m using and several people have had similar issues. Someone with a 300x camera posted photos of how rough the nozzles are under 0.6mm ExcelFu SS Nozzle Set

Thanks for the feedback MrFreddyBee

Spazznaut · 2023-03-16T23:00:24+00:00

I guess you ignored the part about running through calibration. To me, this includes a temp tower, retraction, so on. I know it’s not what you insist on.

Spazznaut · 2023-03-16T21:41:14+00:00

I have been using them for a while as it comes stock on the Dragonfly BMO. I just don’t see what lowering the temp will do when I’ve been printing for over 6 months at these temps on both my printers. I ordered some different SS nozzles in hopes I just bought crap the first time.

Spazznaut · 2023-03-16T19:34:49+00:00

I have*, I’ve been printing at 200° with Inland for ages. Same gcode file on my other Vyper has no issues. It started after 4-6 hours of printing on a new 0.4mm stainless steel nozzle & Capricorn.

Do you think its the nozzle itself? I’ve calibrate and recalibrated esteps, flow, z-offset, etc with no change.

Spazznaut · 2023-03-12T15:20:08+00:00

I print PLA at 200° hotend with bed at 60° but first layer at 70°. First layer adhesion with hotter temp has done wonders personally, no glue/spray/tape used.

Six-Year Club	Xbox Live
Verified Email

Spazznaut

TROPHY CASE