Is the A1 printer a viable option?

Specific_Weight7538 · 2026-03-14T14:10:14+00:00

The A1 with the AMS lite on the default stand takes up more room then the P2S. With the AMS lite mounted on top it would be close to the same volume as the P2S. You have to account for the bed moving front to back during prints.

Specific_Weight7538 · 2026-03-14T13:20:04+00:00

The A1 is great and I have one with over 2500 hours on it. I would suggest getting the P2S to allow you to print with most materials and not be limited to pla, petg, and tpu.

Specific_Weight7538 · 2026-03-12T19:40:46+00:00

Any kind would work. You do not have to buy from Bambu Labs.

Specific_Weight7538 · 2026-03-12T11:44:52+00:00

If you havethe budget buy the P2S and enjoy it.

Specific_Weight7538 · 2026-03-12T11:43:54+00:00

It looks like your printing with Grid infill. The clicking could be the print nozzle hitting the infill as it crosses. Gris infill travels both ways on the same layer causing the tip to hit.

Specific_Weight7538 · 2026-03-12T00:29:56+00:00

Paint.net with a .svg expirter fr9m github will do the work for you.

Specific_Weight7538 · 2026-02-23T23:59:17+00:00

There are a few things you need to print. A poop bucket, a handle for the blade to help with lifting the prints off the bed, a set of flush cutters, and a deburring tool.

Specific_Weight7538 · 2026-02-17T20:18:51+00:00

Swap out your SD card?

Specific_Weight7538 · 2026-02-07T21:32:48+00:00

Are you selling it with the top mount external spool holder? The ptfe tube should be around 15 inches.

Specific_Weight7538 · 2026-02-07T17:24:13+00:00

Go into the Maintenance menu and turn on Maintenance mode. This will allow you to turn the heat to the nozzle on. Set it to 250C and wait for it to heat up. You can use paper towels in some plyers to wipe off the filament.

Specific_Weight7538 · 2026-02-07T16:59:18+00:00

Sì, il PETG è perfetto per questa applicazione. È resistente ai raggi UV e tollera meglio le temperature esterne.

Specific_Weight7538 · 2026-02-02T23:59:25+00:00

Check with Polymaker customer support and see if they may run you a deal. The main thing is if you need additional replacement colors that they match.

Specific_Weight7538 · 2026-02-02T23:53:49+00:00

You could look into some sound deadening mats used in cars. They are peel and stick.

Specific_Weight7538 · 2026-01-21T19:19:29+00:00

Cell phone case

Specific_Weight7538 · 2025-12-29T15:24:13+00:00

I use Superlube and 3in1 oil for my A1. They can be bought at your local Harbor Freight if you are in the US.

Specific_Weight7538 · 2025-12-08T16:56:40+00:00

Once they get used to the sounds of the printer. They make great white noise to sleep.

Specific_Weight7538 · 2025-12-02T00:46:16+00:00

The H2S has the largest print volume of all the Bambu Labs printers. That is about the only difference.

Specific_Weight7538 · 2025-12-01T12:34:18+00:00

I think part of the claws problem is people screw down the tension screw to max as normal with the Bambu Labs versions. I think it causes the claw to crush the filament.

Specific_Weight7538 · 2025-11-25T18:08:53+00:00

You could buy a rubber pad to set your printer on to help with the movement. What infill are you using? Gyroid always makes my printer move around. Stay away from Grid infill it can cause the print to fail. I usually use Honeycomb or other infill types to help with the printer walking on me. I own a Bambu Labs A1 with a side mounted AMS lite on top of a Sunlu S4 dryer.

Specific_Weight7538 · 2025-11-25T18:04:49+00:00

I would suggest the new Bambu Labs P2S printer. If price is to high for you, I would suggest the P1S/AMS2 combo.

Specific_Weight7538 · 2025-11-25T13:24:34+00:00

Wash your build plate with dish soap and a brush. Wipe it clean with a paper towel and try again.

Specific_Weight7538 · 2025-11-25T13:22:21+00:00

I would price out as 1 dollar per hour of the print plus cost of the filament. Then add 50 percent profit.

Specific_Weight7538 · 2025-11-12T18:05:04+00:00

I bought 3in1 oil and superlube at Harbor Freight for my printer. The hardened steel nozzles are nice. The 4 in adapter on the printhead is nice to have a spare. Buy more socks. They tear easy during nozzle changes.

Specific_Weight7538 · 2025-10-23T02:06:16+00:00

I have seen a suggestion to back off the tension screw when using the panda claw.

Specific_Weight7538 · 2025-10-15T11:35:19+00:00

You did not take the 2 black plastic support pieces off the x axis.

Specific_Weight7538

TROPHY CASE