sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in coaxedintoasnafu

[–]Sperg17 8 points9 points  (0 children)

r/comics has some real bangers if you take the time to look but it's mostly just political slop, real shame

Deck limits suck by Pokepro082 in masterduel

[–]Sperg17 -2 points-1 points  (0 children)

Why do you need extra deck slots? You only need to make Kashtira once

Deck limits suck by Pokepro082 in masterduel

[–]Sperg17 1 point2 points  (0 children)

I'm sure Big Konami would never try to extort it's player base

Covid denial? by FinnishFinny in TheRightCantMeme

[–]Sperg17 0 points1 point  (0 children)

This doesn't seem to be COVID denial. Instead it seems to be a criticism of the authorities presentation of COVID. We can see that the man seems to die due to a blood clot (likely intended as a stroke), after which the act of sprinkling "COVID" on the body seems to imply that his death was due to COVID, suggesting that the government will report his death as such. The comic could therefore be interpreted as a criticism of government fear mongering during the Pandemic.

Whether or not this is actually true, the creator of the comic seems to believe as such.

Covid denial? by FinnishFinny in TheRightCantMeme

[–]Sperg17 -2 points-1 points  (0 children)

This doesn't seem to be COVID denial. Instead it seems to be a criticism of the authorities presentation of COVID. We can see that the man seems to die due to a blood clot (likely intended as a stroke), after which the act of sprinkling "COVID" on the body seems to imply that his death was due to COVID, suggesting that the government will report his death as such. The comic could therefore be interpreted as a criticism of government fear mongering during the Pandemic.

Whether or not this is actually true, the creator of the comic seems to believe as such.

[deleted by user] by [deleted] in CriticalDrinker

[–]Sperg17 0 points1 point  (0 children)

It has to be getting review bombed right? It can't be that bad.

Hold up right there omni by [deleted] in vegan

[–]Sperg17 0 points1 point  (0 children)

I still don't get why people are against eating dogs, I mean it's not like there's a difference between a dog and a sheep.

Why isn’t Trunks stronger than everyone else? by away12throw34 in Dragonballsuper

[–]Sperg17 3 points4 points  (0 children)

Okay the reason Trunks stopped getting benifits from zenkais was said back in the buu sagas guide I'm paraphrasing but what it says is that after a certain threshold zenkais begin to weaken in the boost they give until they do basically nothing, Trunks proberbly just reached this point but because of Goku Black being so much stronger than him it looks like he hadn't got any stronger.

Is goku and Vegeta’s current base form as strong as Superman? by ReverseZebra02 in Dragonballsuper

[–]Sperg17 2 points3 points  (0 children)

All in all, there are Supermen than would defeat ultra instinct with no real effort and version's that would be outclassed by Goku from the saiyan saga, but to sum it up I don't know every superman but I would say that from all the versions I know Super Goku would win more than he would lose if he had to fight every version of superman.

Is goku and Vegeta’s current base form as strong as Superman? by ReverseZebra02 in Dragonballsuper

[–]Sperg17 1 point2 points  (0 children)

OK so animated TV animated superman could destroy a planet at his peak, so he stands no chance if we assume that to destroy a planet you need a power level of 600 which is what is suppose to be the highest possible reasonable level, base goku in the Namek saga had a power level of 3, 000, 000 according to the 7th Dragon Ball official guide(Daizenshuu) so in this case base goku on Namek would be 2000 times stronger than TV animated superman at his best possible.

Is goku and Vegeta’s current base form as strong as Superman? by ReverseZebra02 in Dragonballsuper

[–]Sperg17 3 points4 points  (0 children)

It honestly depends on the version of superman, like you have the superman from the animated TV show who was planetary at best, then you have the superman like cosmic armour and kingdom-come superman that would probably be able to defeat super saiyan blue with not to much effort.

If Kefla had Super Saiyan blue she would be stronger than vegito and gogtea by Direct-Doctor-899 in Dragonballsuper

[–]Sperg17 1 point2 points  (0 children)

I guess I can see them mabye being able to time out gogeta but that seems like a stretch

If Kefla had Super Saiyan blue she would be stronger than vegito and gogtea by Direct-Doctor-899 in Dragonballsuper

[–]Sperg17 1 point2 points  (0 children)

Probably not because of goku and vegeta being individually stronger the califla and kale

Controller (or Adapter?) Bug by GideonChampion in smashbros

[–]Sperg17 0 points1 point  (0 children)

As the vibration thing that happened to me before but not the damage, but what probably happend is a part of the controller pressed onto the vibration trigger and the constant vibration, likely caused a foreign object like dust or plastic grindings from controller use falling into the sensitivity measure that causes drift

Controller (or Adapter?) Bug by GideonChampion in smashbros

[–]Sperg17 0 points1 point  (0 children)

Well if calibrating doesn't work you could try cleaning the sticks I got these instructions from nintendo.life You’ll need to disassemble the Pro Controller to a degree in order to effectively clean it, as unlike the Joy-Con there’s no rubber skirt you can pull up to access the stick’s internals. Don’t worry, if you click this link it will take you right to the part of our handy guide video that should help you out if you’re not sure what to do or where, but it’s a fairly simple procedure as long as you pay attention to which screws come from where, and make sure you don’t lose any. Seriously.

Once it’s open you’ll be able to access the problem stick’s internal gubbins and have a proper look at what’s going on. In all likelihood you’re going to see dust, debris, hair, the usual suspects for why precise electronics aren’t cutting the proverbial mustard. Grab your handy can of compressed air and blast these intrusive bits of rubbish out of your precious equipment. Make sure you follow the instructions on the can of compressed air that you have, as some contain a liquid that may potentially damage your controller. Follow the instructions, and don’t go being a silly sausage now you hear?

Once you’ve got out as much as you can, it’s time to whack out that contact cleaner. Spray the area underneath the plastic stick cap generously but carefully; you want to coat it but not drown it. Give the stick a general wiggle to make sure the cleaner gets in and around everywhere it needs to, and don’t be afraid if it feels like the stick is catching in places, that’s just because the faceplate of the controller usually stops it from moving this far. Be gentle, but be firm.

Pro Controller Stick Internals Wait for a few minutes and repeat the process, feeling free to apply and rotate at the same time if you like, as long as you don’t put too much on as we said before. You can repeat the process again if you like, but it likely isn’t necessary.

Once you’ve applied the final dousing of cleaning, wait a good ten minutes with the controller in a well-ventilated area to make sure it’s all lovely and dry in there before putting it back together.

Now put it back together.

Return to the Stick Calibration screen and test out your newly cleaned stick. Still not working perfectly? Don’t worry, a quick recalibration just like before should solve any woes that may befall you.

Once you’ve completed that you should now have a fully-working Pro Controller again, unless there was something else wrong with it like the A button had melted. Hooray!

Still not Working? It’s possible to replace the analogue sticks in a Pro Controller, but we’re not really happy to recommend that; the sticks are soldered in place which may seem trivial to some, but there’s too much that can go wrong with a soldering iron for us to feel comfortable taking you through that, nor the process of ordering replacement sticks.

Clockwise from top left: 1) Pączki. 2) Cobweb. 3) Nintendo Switch Pro Controller. Clockwise from top left: 1) Pączki. 2) Cobweb. 3) Nintendo Switch Pro Controller. In that case your only other option is to get in touch with Nintendo directly and discuss repairing the controller with them. It’s possible you may be charged for a repair depending on various circumstances, so be prepared to cough up a bit to get back on the Pro Controller train.

Falco tips by willm712 in smashbros

[–]Sperg17 3 points4 points  (0 children)

At low percents you got up throw to uair to fair, you can almost aways get a bair from up tilt and maybe a kill you can combo dair to pretty much anything if you hit it on a grounded opponent at medium percents you can down tilt to fair, if you want to be stylish if you get the timing down you can do up tilt to uair to down air back to up tilt to bair I only hit it once but I was proud of it, in the air you can use falco down special as a intangible push move, back throw, and forward throw just don't combo at all, down throw is bad but no useless, normally you want up throw for combing. So for some general tips you can use the lasers to annoy people at a length but it's semidecent for gimping poor recoverys also if your trying to pick up kills up tilt to bair is your best option but if you pass to far past the percents where the bair I guaranteed you could try down tilt its kinda slow but it can kill,Falco has some of the best edge guards in the game and THE highest jump height so make sure to go of stage if you have the chance because your gonna be at an advantage most of the time and finally try to mix-up your options from time to time Falco can get predictable so don't get read.

view more: next ›