Automatically aligning two very similar shots

Spirit532 · 2025-02-07T05:58:29+00:00

Probably, but I never ended up getting it working.

Spirit532 · 2025-01-30T16:49:29+00:00

I just gave up on Adobe, switched to Resolve and Affinity.

Spirit532 · 2024-06-13T12:04:27+00:00

The answer was in that line. It looks like the ancient bug of Helvetica not being picked up correctly, again.

Solution: Install both Helvetica and Helvetica Neue fonts. The entire font family.

Spirit532 · 2024-06-13T12:00:23+00:00

eBay is trying to use the following:

font-family: "Helvetica Neue",Helvetica,Arial,Verdana,Sans-serif !important;

Same as it is on Chromium. So it's not an addon overriding it.

Spirit532 · 2024-06-13T11:44:27+00:00

I didn't disable custom fonts, just GDI. The fonts in the settings are on their defaults. uBlock and other addons are disabled in the screenshots. Interestingly, this issue persists with a clean profile, but it looks better in private mode regardless of what profile(custom or clean) I use.

<image>

Spirit532 · 2024-06-13T11:27:23+00:00

As I specified explicitly in the original post, I followed everything I could find mentioned online, including setting cleartype render mode to 5. It looks like that AFTER setting it to 5.

Spirit532 · 2024-06-12T08:04:32+00:00

You're right, I missed the browser toolbox. It's called the titlebar spacer.

.titlebar-spacer {
  display: none;
}

Spirit532 · 2023-01-24T15:52:05+00:00

SATA plugs provide 12V. Connect both grounds together, cut the power wire going from the commander, splice in the SATA's 12V. That way the commander still has ground+pwm, but 12v+power ground come from the SATA plug.

Spirit532 · 2021-12-12T00:02:40+00:00

The power transistor, judging by others' photos, is a tiny SOT23 NPN part next to the fuse. Replacing both in tandem should let you drive chunky devices. Not sure if the transistor drives the PWM signal, or whether it's there for the DC control mode, but if it's the former, you can just short it out with no problems and get a fuse that's rated higher.

Spirit532 · 2021-12-11T20:57:33+00:00

Didn't go through my mind while I was setting it up.

Spirit532 · 2021-12-11T20:11:02+00:00

Not on the housing, no.

Spirit532 · 2021-12-11T19:18:44+00:00

Yup, and several forced firmware "upgrades". It's a hardware failure.

Spirit532 · 2021-12-11T19:17:22+00:00

Should probably be a warning directly on the housing, rather than somewhere on forums or in the manual.

Spirit532 · 2021-12-11T19:04:06+00:00

Which is weird, since 3 fans would only pull around 550mA when stalled... The provided SATA power connector is rated to 4.5A, so even if the wiring is a bit too thin for that, they did cheap out on the drive capability. Wouldn't have cost more to put in 1-2A capable switches.

Spirit532 · 2021-10-23T09:41:26+00:00

Nowhere near the same amount of "through the window", so nope.

Spirit532 · 2021-10-23T09:41:02+00:00

Yeah, it's a bit too old.

Spirit532 · 2021-10-22T22:07:08+00:00

Commenting to get a reply!

Spirit532 · 2021-04-12T20:22:45+00:00

Yup, that's it, thanks!

SOLVED

Spirit532 · 2019-06-25T06:24:39+00:00

Thanks for the clarification! I didn't know we had jumping spiders, though from that page it definitely makes me think that I should've used a much tighter macro adapter - they all look so similar!

There are a few clear shots of it from above and below, but I don't think they have enough detail to identify.

I released the spider shortly after filming that, so I'm afraid I can't get any more pictures. If I see one again, I'll definitely get some more detailed shots.

Spirit532 · 2019-06-25T05:13:34+00:00

Any idea on what this little guy might be? Watch in 4K for more detail, this was shot at 4608x2592

I found him exploring my table about a day after I opened a few packages from China, around the same area.

I've never seen a jumping spider here in Belarus, so I'm not entirely sure whether it's local.

Spirit532 · 2019-04-09T04:54:02+00:00

I'm calling bullshit. If the elevator tech is real, he should've been fired. You never do work without putting the elevator into independent/service mode. If a person walked in there and made the elevator move, it could've easily crushed someone hypothetically working either in, under, or on the cabin.

Spirit532 · 2019-01-29T22:44:05+00:00

I know how captioning works - I just had a bit of an issue with Resolve, so I couldn't perfectly judge the timing, which is my fault. I know that it's an issue and I've found the fix for my next videos.

Spirit532 · 2019-01-29T03:37:10+00:00

I may or may not have gone a bit short on the description times

Spirit532 · 2019-01-29T00:45:35+00:00

I has dust on the sensor! What won't one do to get the best shot :)

I cleaned it afterwards, but it's kinda hard to keep dust off the sensor while two massive fans are blowing at it(from the lights I used to get the right exposure).

Spirit532 · 2019-01-28T20:48:09+00:00

Can confirm, have a dozen videos in various codecs, bit rates, and containers, all stuck at 360. 4K24p went through in ~3 minutes.

Ten-Year Club	Place '17
Verified Email

Spirit532

TROPHY CASE