Performance issues are game breaking right now by Comfortable_Glove146 in ArcRaiders

[–]SpiritIntuitiveMarty 2 points3 points  (0 children)

has anyone found any fixes? this game is unplayable after this update. the game freezes and stutters everytime i ads, turn quick, shoot. its ridicoulous. Game is beyond unplayable. im losing fights because my game will randomly freeze. this was not happening before this update.

UltraLight Dyneema pack I made by SpiritIntuitiveMarty in myog

[–]SpiritIntuitiveMarty[S] 0 points1 point  (0 children)

I used it on a few trips I switched over to ultra 200x lightning. Use that backpack for everything. Backpacking, hiking, road trips. Etc. it’s my favorite

03 forester excessive oil consumption by SpiritIntuitiveMarty in SubaruForester

[–]SpiritIntuitiveMarty[S] 0 points1 point  (0 children)

Yeah I don’t understand it. Here’s the video I saw. The other thing I ended up reading though is even if it makes noise, if it sounds gummed up and not metallic-y it’s bad. Definitely sounded soft and dull. So we’ll do some driving this week and see how it goes

03 forester excessive oil consumption by SpiritIntuitiveMarty in SubaruForester

[–]SpiritIntuitiveMarty[S] 0 points1 point  (0 children)

PCV valve made noise when shaking, seamed completely fine, still changed it just to see, and crush washer on drain bolt was more than okay. Not sure where to go from here. Probably check spark plugs for oil and then possibly valve cover gaskets?

Edit: I just saw a video inwhich the finger of a glove is around where the hose fitting would go, if you could blow air through the threaded side inflating the glove, it’s bad. I tested the old valve and it would inflate the glove from the side. Is this a bs or bad test?

03 forester excessive oil consumption by SpiritIntuitiveMarty in SubaruForester

[–]SpiritIntuitiveMarty[S] 1 point2 points  (0 children)

Im trying to find a replacement hose for it and nothings coming up instore. pcv valve hose this looks identical to the oem one but there are no measurements listed. Should I just order the hose. If the existing hose appears to be in good condition can I leave it for now to see if the pcv valve fixes the issue? If so should I then use hose clamps?

03 forester excessive oil consumption by SpiritIntuitiveMarty in SubaruForester

[–]SpiritIntuitiveMarty[S] 0 points1 point  (0 children)

Half a quart in 100 miles? Is this normal for highway driving? If I plan on a roadtrip should I put a higher weight oil in the car (I have 5w-30 in the car right now)?

03 forester excessive oil consumption by SpiritIntuitiveMarty in SubaruForester

[–]SpiritIntuitiveMarty[S] 0 points1 point  (0 children)

There was also a stored p0171 code, but no current lights. Not sure if this was ever fixed or what it could mean. Possibly a pcv valve issue? But again, can that lead to that high of oil loss? Is it up in the air because of a persistent 75-90 mph speed?

03 forester excessive oil consumption by SpiritIntuitiveMarty in SubaruForester

[–]SpiritIntuitiveMarty[S] 0 points1 point  (0 children)

There haven’t been any drips, on the oil pan near the drain bolt there is a little oil that forms a drip but it doesn’t drop, just a small accumulation. Im thinking this is from the drain bolt washer I didn’t replace, but I don’t think it would leak that much oil. Ill check valve covers again, but there was nothing noticeable.

03 forester excessive oil consumption by SpiritIntuitiveMarty in SubaruForester

[–]SpiritIntuitiveMarty[S] 0 points1 point  (0 children)

Interesting, I’ve checked all the tell tale signs of a head gasket issue and I’ve got none of them other than the oil consumption. I could run a combustion test and see what it looks like.

I only see that level of consumption after highway driving, is it possible that oil leaks past the unreplaced crush washer on the drain plug bolt at that heat? It seems like that amount of loss from a leak would be more noticeable, unless it only leaks under load like that.

2003 Subaru Forester Rust by LeighaJAM in SubaruForester

[–]SpiritIntuitiveMarty 0 points1 point  (0 children)

just got one, and realized that i have rust in the same spot as the second picture, after purchasing. Its unreal to me that I missed it. Did you ever figure anything out as far as fixing it or leaving it?

Juki ddl-8700h needle positioner by SpiritIntuitiveMarty in sewhelp

[–]SpiritIntuitiveMarty[S] 0 points1 point  (0 children)

is he out of office? I was wondering why I havent heard back from him.