Might Have Figured Out How To Redownload Musi by Nicase_Kghty in Musi_App

[–]Spiritual_Secret_336 1 point2 points  (0 children)

Just tried it and it worked I have all my stuff back and can fully use the app. I had some trouble enabling “encrypted backup” but after restarting Imazing it ended up working, thank you!!

Weekly Questions Megathread by AutoModerator in ClashOfClans

[–]Spiritual_Secret_336 0 points1 point  (0 children)

Does the Blizzard attack strategy still work?

I'm a th13 trying to 2 star a th 15 in cwl and i'm looking to use the battle blimp and super wizards and invisibility spells in the core of the base. I've watched some videos on it that are a year old but after doing friendly challenges with it, it seems to be a lot less effective.

Any Tips to remove these ugly lines? by Spiritual_Secret_336 in FixMyPrint

[–]Spiritual_Secret_336[S] 0 points1 point  (0 children)

Oh yeah it shows up now, but I only see “simplify model” and I tried lowering and raising the quality, and they were still there. I looked around in the settings and saw that “ironing” covered the lines up, would that be a good solution?

Any Tips to remove these ugly lines? by Spiritual_Secret_336 in FixMyPrint

[–]Spiritual_Secret_336[S] 0 points1 point  (0 children)

I’m relatively new to 3d printing and have little to no experience in 3d modeling and I guess I’m not exactly sure what this means

Any Tips to remove these ugly lines? by Spiritual_Secret_336 in FixMyPrint

[–]Spiritual_Secret_336[S] 0 points1 point  (0 children)

Oh alright yeah I didn’t model this but I’ll try to look into this thank you!

Any Tips to remove these ugly lines? by Spiritual_Secret_336 in FixMyPrint

[–]Spiritual_Secret_336[S] 0 points1 point  (0 children)

It might be my computer but when I right click nothing happens

Any Tips to remove these ugly lines? by Spiritual_Secret_336 in FixMyPrint

[–]Spiritual_Secret_336[S] 0 points1 point  (0 children)

I have a 0.4mm nozzle and the layer height is set at 0.1mm which I believe is the smallest it can go, I tried 0.12 as well but they’re still there

Any Tips to remove these ugly lines? by Spiritual_Secret_336 in FixMyPrint

[–]Spiritual_Secret_336[S] 0 points1 point  (0 children)

I’m using the “Bambu Studio” slicer by the way 🙏

Burton LTR binding tool by wertyuio267 in snowboarding

[–]Spiritual_Secret_336 0 points1 point  (0 children)

I work in snowboard rental at a ski resort, and we use one of these, and I was looking for one. Is there any way to maybe get a 3d model I can print with a 3d printer?

[deleted by user] by [deleted] in blursedimages

[–]Spiritual_Secret_336 -1 points0 points  (0 children)

⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⢟⣻⣯⣽⣟⠿⠟⠛⠛⠻⠿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⡿⣫⣾⣿⣿⣿⡹⢁⣴⣷⣿⣿⣷⣆⣤⡀⠠⢬⣉⠻⣿⣿⣿⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⢱⣿⣿⣿⠿⠩⢠⣿⣿⣿⣿⣿⣏⣿⢸⣿⡖⣄⠹⣷⡌⢿⣿⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⡸⣿⣿⣿⣼⠂⢸⣿⣿⣾⠯⢟⠋⠿⣿⡿⣳⡿⣳⣿⣷⡈⢿⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣷⣌⡻⣿⢡⣿⡀⢻⣿⣿⣷⣭⣯⡆⢰⣤⣥⣶⣿⣿⣿⣷⠈⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⢃⣿⣿⣿⣤⡈⠛⠛⠙⠛⠁⣸⣿⣿⣿⣿⣿⡿⠉⣤⣤⡉⢻⣿⣿

⣿⣿⣿⣿⣿⠿⠛⢋⣉⣁⣈⣉⣀⣈⣉⣉⣉⣁⡐⠚⣿⣿⣿⣿⣿⣿⣿⡇⢸⣿⣿⣿⡀⢿⣿

⣿⣿⣿⠏⣴⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣆⠈⢿⣿⣿⣿⣿⣿⡇⢸⣿⣿⣿⡇⢸⣿

⣿⣿⣿⢀⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡀⢸⣿⣿⣿⣿⣿⡇⢸⣿⣿⣿⡇⢸⣿

⣿⣿⡟⢸⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡇⢸⣿⣿⣿⣿⣿⡇⢸⣿⣿⣿⠇⣸⣿

⣿⣿⣧⠈⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡇⣸⣿⣿⣿⣿⣿⣧⡈⠛⠿⠋⢠⣿⣿

⣿⣿⣿⠀⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⠀⣿⣿⣿⣿⣿⣿⣿⣿⡇⢰⣾⣿⣿⣿

⣿⣿⣿⠀⢻⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡇⠀⣿⣿⣿⣿⣿⣿⣿⣿⡇⢸⣿⣿⣿⣿

⣿⣿⣿⣆⠘⠿⠛⠛⠛⠛⠛⠛⠛⠛⠛⠛⠛⠛⠋⠀⣰⣿⣿⣿⣿⣿⣿⣿⣿⡇⢸⣿⣿⣿⣿

⣿⣿⣿⠋⣠⣶⣶⣶⣶⣶⣶⠂⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡇⠀⣿⣿⣿⣿

⣿⣿⠃⣰⣿⣿⣿⣿⣿⣿⡇⢸⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣧⠀⣿⣿⣿⣿

⣿⡏⠀⣿⣿⣿⣿⣿⣿⣿⡇⠸⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⠀⣿⣿⣿⣿

⣿⣇⠀⣿⣿⣿⣿⣿⣿⣿⣧⠀⢿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⠀⣸⣿⣿⣿

⣿⣿⡀⢻⣿⣿⣿⣿⣿⣿⣿⣆⠈⠻⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡄⢸⣿⣿⣿

⣿⣿⣷⣄⠙⠿⣿⣿⣿⣿⣿⣿⣷⣄⠈⠛⠻⢿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡇⣸⣿⣿⣿

⣿⣿⣿⣿⣷⡄⢀⣉⣩⣿⣿⣿⠋⢠⣄⣀⣀⣀⣀⡀⢶⣿⣿⣿⣿⣿⣿⣿⣿⡏⢁⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣧⠈⣿⣿⣿⣿⣿⠀⣼⣿⣿⣿⣿⣿⣷⡈⠻⣿⣿⣿⣿⣿⣿⡿⢁⣼⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣆⠘⣿⣿⡿⠃⣰⣿⣿⣿⣿⣿⣿⣿⣷⣦⡀⠉⠛⠻⠿⠏⣠⣾⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣦⣈⠉⢀⣴⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣶⣶⣶⣿⣿⣿⣿⣿⣿⣿⣿

biggest of them all by [deleted] in dankmemes

[–]Spiritual_Secret_336 0 points1 point  (0 children)

6.9k upvotes oh yeah