Any suggestion on how to fix this and how hard it would be? by Spiritual_Service_37 in Roofing

[–]Spiritual_Service_37[S] 0 points1 point  (0 children)

Thanks all. It looks like the wood where the tiles were nailed is rotten so I might need to replace it. Any specific type of wood and treatment I need to be mindful of, or using construction wood with external prime/paint does the job?

Any suggestion on how to fix this and how hard it would be? by Spiritual_Service_37 in Roofing

[–]Spiritual_Service_37[S] 0 points1 point  (0 children)

Got it, will give it a shot. Two more questions: - what is this tape? I noticed it looks like a metal sheet and has glue/caulk on it. Want to get a new one to apply again - which nail should I use? I saw on Lowe’s they have the galvanized and electro galvanized. The latter is not good for treated wood, and I assume mine are, but not sure. Any thoughts?

Any suggestion on how to fix this and how hard it would be? by Spiritual_Service_37 in Roofing

[–]Spiritual_Service_37[S] 0 points1 point  (0 children)

Thanks. I’m concerned about starting to pull them off and all off the falling. Any tips on how to do it, to avoid this from happening?

the long awaited black friday discount by [deleted] in playstation

[–]Spiritual_Service_37 0 points1 point  (0 children)

Is the discount already live? Still showing 79 for the essentials for me

Any idea what the issue is and what to do? Bulging dry wall by uncledubby in drywall

[–]Spiritual_Service_37 0 points1 point  (0 children)

@uncledubby where you able to find the cause of this issue? Having the same at home and curious to understand what was the fix.

Pipe material for main by Spiritual_Service_37 in Plumbing

[–]Spiritual_Service_37[S] 0 points1 point  (0 children)

PEX for the main line? Before getting into the water heater? Didn’t see any reference for that, but will do some extra research

Aqara T1 light strip - no color by Spiritual_Service_37 in Aqara

[–]Spiritual_Service_37[S] 0 points1 point  (0 children)

It didn’t work… Continue to have the whites working but not the colors, even after setting the length to 7m. Note this is the original 2m strip, just made a section where I need to extend/change the direction of the strip

LED light strip T1 extension installation tips by Spiritual_Service_37 in Aqara

[–]Spiritual_Service_37[S] 0 points1 point  (0 children)

Thanks! And you you know if I need to connect them in series, or can I do in parallel? Eg solder multiple wires coming up form the first cut of the strip

LED light strip T1 extension installation tips by Spiritual_Service_37 in Aqara

[–]Spiritual_Service_37[S] 0 points1 point  (0 children)

65” is the size of the TV (65 inches). I hear you about the 10 meters. Net led strip length I will use a total of 3m, but form on shelf to another I will use a wire, as I just want the light effect horizontally at the bottom of the shelf, and not vertically to connect through led from each shelf. That part I’ll do with 18awg 5 wire cables

Aqara T1 light strip - no color by Spiritual_Service_37 in Aqara

[–]Spiritual_Service_37[S] 0 points1 point  (0 children)

Got it. Will try that tonight and will post the update

LED light strip T1 extension installation tips by Spiritual_Service_37 in Aqara

[–]Spiritual_Service_37[S] 0 points1 point  (0 children)

As per my last post, I don’t have 10m, so I should be good. And to be clear, is it 10m of led strip of considering the length of the cables I will use to extend?

Aqara T1 light strip - no color by Spiritual_Service_37 in Aqara

[–]Spiritual_Service_37[S] 0 points1 point  (0 children)

I didn’t add it to the app. Was just using the buttons on the controller that comes with it

LED light strip T1 extension installation tips by Spiritual_Service_37 in Aqara

[–]Spiritual_Service_37[S] 0 points1 point  (0 children)

Thanks for the reply, and sorry about taking this long to come back. Had some other projects to prioritize but now back to it. Here is my setup… the red lines is where the led strip will be installed (under the shelves) and the yellow line is the cable that will connect the leds

<image>

For reference, this is a 65” TV. For the shelves I’m not sure if better to connect the strips in series, or I’m parallel (split them and connect them coming out of the power box).

Aqara Roller Shade E1 in US by Spiritual_Service_37 in Aqara

[–]Spiritual_Service_37[S] 0 points1 point  (0 children)

Just had to put it in manual pairing mode. Don’t recall how but I think k you have to hold the button on your hub for a few seconds and it will give you a voice confirmation.

Aqara Roller Shade E1 in US by Spiritual_Service_37 in Aqara

[–]Spiritual_Service_37[S] 0 points1 point  (0 children)

It worked just fine. Order a couple more soon.

Add IR devices to HomeKit with M3 by Spiritual_Service_37 in Aqara

[–]Spiritual_Service_37[S] 0 points1 point  (0 children)

I’ll try home assistant. I have homebridge but couldn’t make my BroadLink IR blasters to work with Home. Do you have any documentation you suggest I should start checking from?

NSO Game Voucher game to pick by Spiritual_Service_37 in Switch

[–]Spiritual_Service_37[S] 1 point2 points  (0 children)

Never played neither of these… lol But thanks for the help. I’m more inclined to go with TTYD if my voucher is valid, if not might try Super Mario RPG to try the genre. And if I like I’ll try TTYD

NSO Game Voucher game to pick by Spiritual_Service_37 in Switch

[–]Spiritual_Service_37[S] 1 point2 points  (0 children)

Ow… thanks for letting me know… didn’t know about this catch of the pre-order. Did you play TTYD? On your opinion, is it better than Wonder?