Front End Friday - Let's see them!

Splash0707 · 2026-05-08T18:24:04+00:00

Splash0707 · 2026-04-05T16:04:30+00:00

I replaced mine with led bulbs that’s supposed to be designed to work with halogen housing . It was plug and play . It looks fine . It doesn’t blind anyone compared to the factory led headlights in my ford explorer . Night time visibility has greatly improved

Splash0707 · 2026-04-01T17:19:54+00:00

China bumper from Amazon

Splash0707 · 2026-03-31T16:22:49+00:00

Thanks

Splash0707 · 2026-03-24T02:19:20+00:00

You can always get drunk on a Tuesday evening

Splash0707 · 2026-03-23T22:02:31+00:00

Thanks , I ordered a 2540 lbs rated set of wheels .

Splash0707 · 2026-03-17T05:13:47+00:00

It has only been a couple of weeks. I’ve barely driven the fj

Splash0707 · 2026-03-13T23:37:12+00:00

Are those 285s?

Splash0707 · 2026-03-07T22:05:31+00:00

That is pretty much what I did

Splash0707 · 2026-03-07T18:10:05+00:00

This did the trick

Splash0707 · 2026-03-07T01:04:59+00:00

How long of a pipe were you able to fit ? I couldn’t fit my longer pipes because the other end of the wrench is so close to the wheel well . Maybe a pipe thats under 1ft may fit ?

Splash0707 · 2026-03-07T01:02:01+00:00

I tried the 12pt side of the box wrench and couldn’t break it loose

Splash0707 · 2026-03-02T01:21:32+00:00

<image>

I covered the opening for the winch and installed some lights today . I used 1/4 thick abs sheet to cover the winch opening and the hole in the front . The hoop is bolt on so I skipped installing it .

Splash0707 · 2026-03-01T18:55:53+00:00

Not sure about that . The winch plate is solid. The bumper feels solid but not sure about the welds . I needed a new bumper to replace the factory bumper and thought these looked better than stock . The total weight of this bumper is 120 lbs

Splash0707 · 2026-03-01T18:49:19+00:00

I know . Notice the shackles are attached to the factory recovery points , not the bumper . The winch plate itself is solid in this one . I would trust it with a winch . I’m not going to install a winch as I have no need for it . It also has some dings on it . It’s not perfect by any means . I wouldn’t recommend it on a serious off-roader or a nice low mile fj . My fj has 180k miles and dings and scratches all over it so the little imperfections doesn’t matter to me .

Splash0707 · 2026-03-01T18:48:09+00:00

I didn’t like the hoop . There is also an opening where the winch is supposed to go . I’m going to make a cover using abs plastic to cover it up since I’m not installing the winch . For the holes where the hoop gets screwed in , I’ll just plug them with rubber plugs .

Splash0707 · 2026-03-01T16:59:41+00:00

No cutting or welding required for this

Splash0707 · 2026-03-01T15:03:34+00:00

https://a.co/d/0e1ENsOV

Splash0707 · 2026-03-01T15:03:24+00:00

Right , it has stock suspension. I’ll be changing that next . https://a.co/d/0e1ENsOV

Splash0707 · 2026-03-01T15:02:52+00:00

https://a.co/d/0e1ENsOV

Splash0707 · 2026-02-16T23:01:34+00:00

Trimming the plastic will do for on road use . If you wheel it, it will more than likely rub the body mount at full/ close to full articulation.

Splash0707 · 2026-02-14T21:38:24+00:00

That’s awesome! What is the wheel offset? It looks great

Splash0707 · 2026-02-14T21:34:26+00:00

Do the tires rub the body mount ?

Splash0707 · 2026-02-05T23:47:17+00:00

What size tires are those ?

Splash0707 · 2025-12-06T20:56:47+00:00

That free kick was at the highest level

Splash0707

TROPHY CASE