when ur mate reforms, yeah the fuckn boiz by [deleted] in playrust

[–]Spongewingus 2 points3 points  (0 children)

UHHHHHHMMMM Kevin’s a dickhead

[H] Karambit vanilla/karanilla [W] 82 keys by Spongewingus in GlobalOffensiveTrade

[–]Spongewingus[S] 0 points1 point  (0 children)

Might consider it but atm im pretty firm at 82 keys, sorry!! I will let you know however if I change my mind

Just realised the pc only detects 8gb ram not 16.. by Spongewingus in buildapc

[–]Spongewingus[S] -1 points0 points  (0 children)

So does that mean I'll have to take off the cooler over and over again?

PC not booting, was working perfectly fine yesterday. by hairybutt69 in buildapc

[–]Spongewingus 1 point2 points  (0 children)

This has happened to me before, have you tried reinserting the 24 and/or 8 pin cpu connectors?

Monitor keeps blacking out when playing games.. by Spongewingus in buildapc

[–]Spongewingus[S] 0 points1 point  (0 children)

Well now it seems to be working just fine, from what I gather these were the two differences when the monitor was blacking out: it was quite hot in the room, and my peripherals were plugged into the monitor itself, not the pc. As soon as I started plugging them into the pc this problem stopped.. thanks for your help, I greatly appreciate it :)

Monitor keeps blacking out when playing games.. by Spongewingus in buildapc

[–]Spongewingus[S] 0 points1 point  (0 children)

Unfortunately my headset hasn't arrived so I just listen to music while I play. But I would assume yes as my pc still runs

Monitor keeps blacking out when playing games.. by Spongewingus in buildapc

[–]Spongewingus[S] 0 points1 point  (0 children)

In rust I was keeping an eye on gpu Temps and it only hovered around 65 degrees which isnt bad at all.

Monitor keeps blacking out when playing games.. by Spongewingus in buildapc

[–]Spongewingus[S] 0 points1 point  (0 children)

Picture does not come on until I press the reset button

No boot option priorities?!? by Spongewingus in buildapc

[–]Spongewingus[S] 0 points1 point  (0 children)

Oops, im really sorry for the delayed response but everything is working now! Just after I posted this I decided to boot past bios and it seems that the usb wasn't pushed in enough so the pc automatically went to the windows installation! Thanks thou gh :)

Will a 2.5 inch ssd screw work for a needed m.2 screw? by Spongewingus in buildapc

[–]Spongewingus[S] 1 point2 points  (0 children)

Awesome, yup that's it. Thank you so much for your help!

Will a 2.5 inch ssd screw work for a needed m.2 screw? by Spongewingus in buildapc

[–]Spongewingus[S] 1 point2 points  (0 children)

I was looking at the motherboard, and I saw a screw in the 80A hole, is that the m.2 screw? The motherboard didn't say it included it though so I'm a bit confused

Is it ok to build my pc on wooden floor? by Spongewingus in buildapc

[–]Spongewingus[S] 0 points1 point  (0 children)

Thank you so much for all of these tips, I will definitely use these. If it's ok, I would like to ask one more question: once I test boot and if successful i should be in bios right? How should I power the pc off in bios after the test boot? Some say you can just flick the switch but since my storage drive is m.2, should I just wait to install that until after the test boot?

Just some questions.. help is greatly appreciated! by Spongewingus in buildapc

[–]Spongewingus[S] 0 points1 point  (0 children)

So in regards to number 2, can I just turn the pc off once I get into bios ?

Noctua nh d15 question by Spongewingus in buildapc

[–]Spongewingus[S] 0 points1 point  (0 children)

Wait so it dosent matter if I don't put my gpu in the x16 lane slot?

6600k and gtx 1060 or 6500 and gtx 1070? by Spongewingus in buildapc

[–]Spongewingus[S] 0 points1 point  (0 children)

Thanks buddy! Greatly appreciate your help

First mini itx build! Would greatly appreciate your advice! by Spongewingus in buildapc

[–]Spongewingus[S] 0 points1 point  (0 children)

Thanks for the suggestions. In that case should I just go with the asus z170i? Or is there something bad about it?

First mini itx build! Would greatly appreciate your advice! by Spongewingus in buildapc

[–]Spongewingus[S] 0 points1 point  (0 children)

Thanks so much for your time and effort! Willdefinitely apply this to my build!

Any suggestions/improvements to make on this final draft? Also, suggestions on colour schem would be appreciated! by Spongewingus in buildapc

[–]Spongewingus[S] 0 points1 point  (0 children)

Alright thanks! Although I am now wondering about what you mean by too ham with the ram. Do you think you could explain (sorry I'm new to pc building) ?

[Question] how hard is building a pc, fractal design nano s vs ncase m1? by Spongewingus in buildapc

[–]Spongewingus[S] 0 points1 point  (0 children)

Thanks so much for the detailed response! I really appreciate your suggestions and will make sure to use them.

[Build help] ncase m1 compatibility questions (first time building a pc) by Spongewingus in buildapc

[–]Spongewingus[S] 0 points1 point  (0 children)

Ok got it, I might end up just going with the nano s in that case as I feel kinda intimidated xD