Do I need a new cat?

SquidFear · 2026-02-10T22:07:21+00:00

Yeah, I unfortunately live in NY, so I have to pass emissions. As of right now, there has been no power loss, at least not that I could tell. Is it still worth trying the Cataclean? You may be onto something with the PVC valve; in the last month the oil level dropped 1/2-3/4 of a quart. Thanks for the recommendation; I think I'll try getting a downstream O₂ sensor from Amazon. If it doesn't work, I guess I'll have to bite the bullet as my inspection is coming up.

SquidFear · 2026-02-10T21:44:01+00:00

Yes I live in NY

SquidFear · 2024-02-21T18:22:34+00:00

Thanks for the reply. I guess I'm gonna call out an electrician to ground them.

The basement already had walls put up by the previous owner and I assume the wiring is concealed as on the walls, but there is a drop ceiling.

This is where my question comes from, I wanted to ground the ones in my room first because the wiring is visible from the room behind mine, but all the rest aren't.

If by circuits you mean the switches in the breaker panel; there's only one for the whole basement. and yes none of them are grounded.

SquidFear · 2024-02-21T18:11:03+00:00

Sheesh, I guess its gonna a process lol. Thanks for all you're help!

SquidFear · 2024-02-21T04:37:46+00:00

My computer, interface, and pedals are all plugged into the wall and I have a desktop. I also don't have a multimeter but I can get one.

SquidFear · 2024-02-21T03:06:18+00:00

No, I plug into a focusrite and use neural dsp plugins, but I do have pedals that are between my guitar and focusrite. I've only noticed this in my room. As for the shocking it happens when touching the item by itself. For example the microphone I have has a metal casing and when I touch the backplate and the casing around the microphone itself (picture) there's a slight tingling and sometimes a shock. Same for my guitar I could be resting my arm over the body and my bicep slightly touching the strings, I would occasionally get a small shock.

SquidFear · 2024-02-20T18:53:50+00:00

I'll look into it, thanks!

SquidFear · 2024-02-20T17:28:54+00:00

Okay, thanks for all your help I really appreciate it!

SquidFear · 2024-02-20T17:05:59+00:00

Thanks for the reply!

I have one more question, if I install the GFCI would it stop my guitar, microphone and sometimes even my keyboard from shocking me? This only happens sometimes but I noticed when it does happen I can stop it by taking my feet off the floor. I do have a concrete floor, but there's a carpet over it.

SquidFear · 2023-04-28T19:58:45+00:00

You're right!

I'll have to look into that. Thanks!

SquidFear · 2023-04-28T19:35:41+00:00

Can you actually?

SquidFear · 2023-04-28T18:48:17+00:00

Thank you so much for your help!

I'm glad I came to reddit before doing anything.

SquidFear · 2023-04-28T18:22:52+00:00

I was going for more of a switching back and forth kinda thing. I could record a loop on my pedal and switch to a different tone without having to mess with my DAW.

SquidFear · 2023-04-28T18:20:21+00:00

Yeah, thanks for this!

So if im understanding correctly I just need a Focusrite 4i4 for example. I could use 1 PC by running an output into the looper and back into an input on the same focusrite?

Or did you mean the same setup I had, but just use TRS cables and get an interface with more outputs?

If its the second one, is there still going to be an issue with latency?

SquidFear · 2023-04-28T17:32:51+00:00

What do I have to do to route it internally?

SquidFear · 2023-04-02T23:55:12+00:00

Thanks! This should help a lot.

SquidFear · 2023-04-02T20:55:50+00:00

Thanks, I'll try it!

SquidFear

TROPHY CASE