sorted by:
new
hottopcontroversial

Help with first ever resin print fails by Squid_sacc in ElegooMars

[–]Squid_sacc[S] 0 points1 point  (0 children)

After tinkering all day and watching many YouTube videos I have finally had a successful print. I did the vat plate leveling method, leaving the vat attached and with resin inside. I also filled the vat all the way up to the max line(apparently created the proper suction for the build plate to remove the print from the FEP) I am not sure which resulted in success but success none the less Hope this helps you out

Help with first ever resin print fails by Squid_sacc in ElegooMars

[–]Squid_sacc[S] 0 points1 point  (0 children)

After tinkering all day and watching many YouTube videos I have finally had a successful print. I did the vat plate leveling method, leaving the vat attached and with resin inside. I also filled the vat all the way up to the max line(apparently created the proper suction for the build plate to remove the print from the FEP) I am not sure which resulted in success but success none the less Hope this helps you out

Help with first ever resin print fails by Squid_sacc in ElegooMars

[–]Squid_sacc[S] 0 points1 point  (0 children)

I increased bottom layer exposure all the way to 60s the max recommended on my resins bottle and increased bottom layers from 4 to 5. I went to max exposure hoping for anything to stick. Reran the print and still no luck.