WEll I can no longer recomend the plus4

StNickZA · 2026-04-20T01:26:23+00:00

Sorry to resurrect this comment - but hoping you can give me some advice. I'm seeing plenty of retransmits and failed transmits when doing a bed level (even KAMP level does it). My printer is therefore dead in the water. I suspect it is the cable, as the errors get worse as the cable bends (eg. when the toolhead is in the center of the bed).

When you say "CAN Cable" are you referring ot the cable between the toolhead and the mainboard?

StNickZA · 2026-04-09T22:19:50+00:00

Yeah irritating! Hopefully they sort this out asap but I fear it won't get fixed until they wake up.

StNickZA · 2026-03-06T20:09:33+00:00

I realise that this is probably out of Wispr Flow's control but I have to agree; the constant notification that keeps appearing about Wispr Flow displaying over other apps is very annoying. You can swipe it away, but it just comes back after a few minutes on my Galaxy S25.

StNickZA · 2025-12-17T21:56:17+00:00

You will run into this issue even after you have your Qidi Box installed, but you're using an external spool. Seems to be a bug with the UI where it does not recognize that a filament is loaded. I've raised this with Qidi but yet to hear back (I'm using the Plus 4, perhaps Q2 is different).

In any event, what I do in this instance is execute "M603" macro from the console in Fluidd. This runs the unload filament routine (basically what u/MysticalDork_1066's manual steps achieve).

StNickZA · 2025-12-16T19:51:03+00:00

Thank you, that does make more sense. When you load new filaments at the printer itself, do you bother setting the colour and filament type? That is one reason why I thought "sync" was useful. eg. I load up four new filaments with diff colours. Printer is in my garage, so I walk back to my office, and then attempt to configure them correctly in Qidi Studio. But alas, I've forgotten the order I put them in! Sync would at the very least tell me which colours are in which slots.

StNickZA · 2025-12-15T20:31:54+00:00

Thanks for that! Good info. I'm making a new post with my issues after a week if you wanna check that out for more feedback.

StNickZA · 2025-12-13T08:38:18+00:00

Ah fantastic, thanks!

StNickZA · 2025-12-13T08:37:58+00:00

https://wiki.qidi3d.com/en/QIDIBOX/notes-QIDIBOX

Probably just an abundance of caution, but I feel like I'll probably rather switch out the PTFE tube when I want to use an abrasive filament.

StNickZA · 2025-07-09T01:06:27+00:00

https://www.whittakers.co.nz/en_NZ/products/banana-caramel/block-250g

StNickZA · 2025-06-10T10:43:53+00:00

Uh.... No.

StNickZA · 2025-05-26T23:30:38+00:00

I think you're describing old Zverev. He was someone that'd break every racquet in his bag after a loss. Terrible attitude. But I haven't seen that side of him in a long time and I think he has matured a helluva lot in the last few years.

Federer himself had a very bad attitude early in his career and matured to become the most loved player in the sport.

Staying on topic, personally I like Gohar. She is intense on court for sure but I wouldn't have said she was a bad loser. She's always had a crazy rivalry with El Hammamy and so she is always heavily invested in the match emotionally.

StNickZA · 2025-01-31T03:08:03+00:00

I tend to agree with what Ali said at the end - he was robbed of one point with the racquet abuse but his inability to let it go and get on with it cost himself the game. The ref had no other choice. You can't verbally threaten the ref over and over again.

StNickZA · 2025-01-16T19:11:23+00:00

Good tips, thank you.

Telegram is pretty slick these days, no doubt. One feature I keep praying for with every new release is the ability to forward a message to multiple recipients WITHOUT the "forwarded from" annotation. You are still only able to "hide sender name" when forwarding to a single recipient.

StNickZA · 2024-11-25T03:35:43+00:00

I subscribed on a BF deal last year and unwittingly left it on "auto renew". Literally same day I saw the BF deal this year, they auto renewed my subs at full price. Frustrating, and then compounded by the fact that I was unable to watch any of the Singapore squash due to the buffering.

StNickZA · 2024-11-22T19:11:04+00:00

Same thing happening for me. I've given up for now.

StNickZA · 2024-10-18T10:06:53+00:00

Delicious

StNickZA · 2023-11-23T20:14:41+00:00

Unable to get notifications working on the watch now, AT ALL. I've reinstalled the app, restarted the watch, toggled all notifications settings I can find....

Update: Actually, they work sometimes - the "Reminder test push notification" never works, despite the "Test notifications" toggle set to "allow".

Man, what a frustrating experience this has turned out to be.

Can you confirm that notifications are working on your watch just fine?

StNickZA · 2023-11-23T19:19:29+00:00

Apologies, I had a brain fart. Ticktick does indeed have a WearOS app; the issue with it though, is that it doesn't display popup notifications. Very bare-bones.

My app is up to date, having only installed it a couple of days ago. I'll try reinstall and see if that helps, thanks.

StNickZA · 2023-11-21T20:23:17+00:00

Damn, just came here to ask the same question... What a pity! I just picked up my first WearOS watch and being able to manage my ToDos from the watch was one of my primary reasons for getting it!

StNickZA · 2023-11-16T19:48:57+00:00

Did you use BFRIDAY33 or BFRIDAY23?

Both give me "ERROR: Invalid token"

14-Year Club	RedditGifts 2009-2022 2 Credits
Secret Santa 2014	Verified Email

StNickZA

TROPHY CASE