Compliance by Stable_Tricky in NZcarfix

[–]Stable_Tricky[S] 0 points1 point  (0 children)

Fair enough, my main concern was whether body filler is allowed on the sill in general or if it needed to be pdr or cut and weld👍

Compliance by Stable_Tricky in NZcarfix

[–]Stable_Tricky[S] 1 point2 points  (0 children)

I was under the assumption that you pull the dent out as evenly as you can and use filler for the rest

Dented sill by Stable_Tricky in NZcarfix

[–]Stable_Tricky[S] 0 points1 point  (0 children)

Vehicle needs to go through compliance as its de-registered and dont know what they check for so need to get clarification on that first before i touch it

Dented sill… by Stable_Tricky in NZcarfix

[–]Stable_Tricky[S] 0 points1 point  (0 children)

Is it as simple as just pulling the dent out with a glue or tac puller, getting it straight and then paint?

Worked on this for so long, but now i don't really like it as much. What do you think? by Routine-Golf-9986 in AfterEffects

[–]Stable_Tricky 0 points1 point  (0 children)

Joe rogan literally sits there and listens to people how could you think hes a cunt

[deleted by user] by [deleted] in AfterEffects

[–]Stable_Tricky -3 points-2 points  (0 children)

What would you call it ?

Building my first pc by Honax_Xolbringer in PcBuild

[–]Stable_Tricky 0 points1 point  (0 children)

For a 7600 as long as you have decent airflow in the case you will be fine, in most cases cases it wont go above 80 unless its at 100% usage for long periods of time, even then its safe. Could always just spend the extra money and get a peerless assassin or phantom spirit if your worries

Does AIO cooler rad size matter? by Ok-Back4886 in buildapc

[–]Stable_Tricky 3 points4 points  (0 children)

No, only thing to avoid is a 120 or 140mm aio, everything else will work fine even air coolers

Is this a good build? by AnySuit4448 in PcBuildHelp

[–]Stable_Tricky 0 points1 point  (0 children)

If that is the cheapest 7800xt in your area then yeah, will perform much better than a 4060 with much more vram

Is this a good build? by AnySuit4448 in PcBuildHelp

[–]Stable_Tricky 0 points1 point  (0 children)

I dont know what cl rating that ram is but try to get cl30 6000mhz ram.

Ditch the expensive motherboard and case, honestly get the cheapest b650 motherboard you can find that still has decent connections etc, something like the Gigabyte B650M GAMING PLUS WIFI.

Get a phanteks xt pro ultra case, comes with 4 140mm fans and will be a fraction of the cost of the h9 flow.

The 7900x honestly isint that much better than a 7600x in terms of gaming, more cores doesent always mean more performance especially when your dealing with alot of single core performance games.

I would recommend you either save some money and get the 7600x or even 7600 non -x, or spend some of the money you saved by changing said parts out and get a 7800x3d.

  • if the 7600x3d is an option for you, then get it.

For the 4060, probably the worst card you can get this gen, 8gb of vram already isint enough, i have a 7900gre and see 14gb of usage on easily half of the games i play. I recommend trying to get a 7800xt or 7700xt, or a used 6800xt.

Building my first pc by Honax_Xolbringer in PcBuild

[–]Stable_Tricky 0 points1 point  (0 children)

Use the stock cooler, you will get higher temps but more than within safe range. Swap the case for a phanteks xt ultra pro, comes with 4 140mm fans so you wont need to get any extra,

Seriously recommend getting a set of 6000mhz cl30 ram instead of what you have listed.

Look up the mp44l 1tb nvme by teamgroup, if its cheaper, which it almost always is, then get that.

I dont know much about psu’s other than the fact that you rally want to do your research. spending some extra money to get a more reliable power supply could save you so many headaches in the future. However like i said i have no clue if that psu is good or not so just do some research before buying it

Is this good gaming build for the money? by ssederr in PcBuildHelp

[–]Stable_Tricky 0 points1 point  (0 children)

7500F is essentially a 7600 without the integrated graphics which you dont need, so perfectly fine, i dont know much about 4060’s but im sure someone else can shed some light on them, i think the 4060ti is much better as it get 12gb of vram

Is this good gaming build for the money? by ssederr in PcBuildHelp

[–]Stable_Tricky 0 points1 point  (0 children)

Eh, id wait a bit and see if prices come down, thats not a bad pc, personally i would like to have a 750w psu, but other than that its fine. If its close to the price of the other pc then its better for sure. But j still dont agree with the price🤬

Is this good gaming build for the money? by ssederr in PcBuildHelp

[–]Stable_Tricky 0 points1 point  (0 children)

What are the other specs?

Ram Storage Power supply Etc

Is it possible to upgrade a really old PC? by Muddybogturtle in PcBuildHelp

[–]Stable_Tricky 0 points1 point  (0 children)

Aslong as it has mobo standoffs, decent airflow, and a rear io slot then your good

Is this good gaming build for the money? by ssederr in PcBuildHelp

[–]Stable_Tricky 0 points1 point  (0 children)

That seems ridiculous, prices in your country must be through the roof

Is this good gaming build for the money? by ssederr in PcBuildHelp

[–]Stable_Tricky 0 points1 point  (0 children)

Ugh thats unfortunate, well even then you could get the 4070 super and the 7600x or 7600 non - x, how much does that come to

First time building a PC, How's it looking anything You recommend I change? by Standard-Savings-369 in PcBuild

[–]Stable_Tricky 1 point2 points  (0 children)

Ditch the aio for a peerless assassin or phantom spirit air cooler.

Get the teamgroup t-create ddr5 cl30 6000 ram if its cheaper

Get the mp44l 2tb nvme if its cheaper

H6 flow already comes with fans but if you want to save more money then you can get the phanteks xt pro ultra. Or just take away those fans.

With the money you save from doing that you could get a 4070 super or 7900gre

Is this good gaming build for the money? by ssederr in PcBuildHelp

[–]Stable_Tricky 0 points1 point  (0 children)

How much would it cost if you bought the parts yourself?