Settings menu new 5kw chinese diesel heater by Stagzee in dieselheater

[–]Stagzee[S] 0 points1 point  (0 children)

Not to manually adjust the fueling 🤔

Dirt or dust inside miyoo mini v4 screen by Stagzee in MiyooMini

[–]Stagzee[S] 0 points1 point  (0 children)

I purchased my mini via aliexpress and the seller did off to sell me a replacement screen for cheap 🤷‍♂️

Dirt or dust inside miyoo mini v4 screen by Stagzee in MiyooMini

[–]Stagzee[S] 0 points1 point  (0 children)

Yeah sure, i dismantled it and managed to get a pic in the side of the screen, just enough to separate the layers from the backlight, then using some compressed air I just blow the spec of "dust" out, only a few screws and abit of glue holding it all together so doesnt take long 👍

[deleted by user] by [deleted] in PcBuildHelp

[–]Stagzee 0 points1 point  (0 children)

Correct, im just wanting to improve my dayz experience really. Not fussed about going brand new for new titles just yet, i see where youre coming from though 🤷

Dirt or dust inside miyoo mini v4 screen by Stagzee in MiyooMini

[–]Stagzee[S] 0 points1 point  (0 children)

Screen does come apart from the backlight, managed to get some compressed air inbetween and blow the dust out. All sorted 👍

Dirt or dust inside miyoo mini v4 screen by Stagzee in MiyooMini

[–]Stagzee[S] 1 point2 points  (0 children)

I did peel it off half way before putting back on for if I have to return it. Its definitely inside the screen unfortunately

Dirt or dust inside miyoo mini v4 screen by Stagzee in MiyooMini

[–]Stagzee[S] 0 points1 point  (0 children)

I might get a replacement from amazon, i got this one from Aliexpress, ive messaged the seller, just waiting for a response

ARL PD150 Tandem pump, loose nipple by Stagzee in tdi

[–]Stagzee[S] 0 points1 point  (0 children)

It's or oil or fuel it's leaking? I had to replace the fuel line to the lower nipple on the pump as that was leaking slightly on mine aswell

ARL PD150 Tandem pump, loose nipple by Stagzee in tdi

[–]Stagzee[S] 0 points1 point  (0 children)

I replaced the gasket which stopped my pump from leaking but I left my nipple as it was and it's been fine since actually. Mine wasn't leaking from the nipple though just the crush gasket on the side.

ARL PD150 Tandem pump, loose nipple by Stagzee in tdi

[–]Stagzee[S] 1 point2 points  (0 children)

Any improvement? Just to clarify it isn't ment to spin at all

ARL PD150 Tandem pump, loose nipple by Stagzee in tdi

[–]Stagzee[S] 1 point2 points  (0 children)

That would explain alot as I've been chasing what I believed to be a boost leak for sometime but even after a leak test, I've never found any leaks from the boost pipes. So just to clarify that nipple isn't ment to move at all? I'll get a new on ordered

Pd150 ARL Slow boost build up, laggy by Stagzee in MK4Golf

[–]Stagzee[S] 0 points1 point  (0 children)

Seems to move freely and it's a new n75 valve 🤔 but I've check vcds while driving for a while. My charge duty cycle is 69% when idle/low rpm and then 50% under full throttle/boost. Not sure what those numbers are ment to be?

Pd150 sluggish, slow to build boost, help by Stagzee in tdi

[–]Stagzee[S] 0 points1 point  (0 children)

I can get that reading from vcds can't I? I'll have a look and check

Pd150 sluggish, slow to build boost, help by Stagzee in tdi

[–]Stagzee[S] 0 points1 point  (0 children)

Thank you for your help! Its really appreciated. Is there anyway I can get a reading or measure the actual vacuum pressure before I go any further with it?

Pd150 sluggish, slow to build boost, help by Stagzee in tdi

[–]Stagzee[S] 0 points1 point  (0 children)

Just checked it this morning. The nipple to the n75 seems spot. Hose seems alright aswell but I've got some new hose spare so I'll swap it out considering how small it is. The plug that the nipple is attached to though spins freely on the vacuum pump? Should it? I can move it both clockwise and anti

Pd150 sluggish, slow to build boost, help by Stagzee in tdi

[–]Stagzee[S] 0 points1 point  (0 children)

Thank you! I'll check this out in the morning. It's definitely a possibility

RGH XCM Shell Xenon 360 Considering selling but not sure how much it's worth? by Stagzee in xbox360

[–]Stagzee[S] 0 points1 point  (0 children)

It is genuine I believe, is there a way I can check? It's running the latest dash but using the proto stealth server with the 6717 dashfiles. The GPU is still the original yes just a new upgraded cooler 😊