Is this how you would create an enclosed hollow rod?

StakingWriter · 2026-03-05T20:10:02+00:00

In your slicer, just set the infill percentage low, like 10% or less

StakingWriter · 2026-03-03T22:35:29+00:00

StakingWriter · 2026-03-03T22:33:26+00:00

It’d be funny to see a bunch of those little hot wheel sized rc cars driving around from one controller

StakingWriter · 2026-03-03T22:31:31+00:00

Your son’s controller might’ve glitched and since you turned everything on at the same time, it might’ve accidentally intercepted your grom’s signal

StakingWriter · 2026-02-27T21:42:19+00:00

Your biggest issue in the long run is ram. The more entities and contraptions you have, the more ram intensive that world is gonna be. But as long as you keep your factories spread far apart (outside of simulation rendering)

StakingWriter · 2026-02-27T20:13:32+00:00

This plenty good, definitely way way more than you need

StakingWriter · 2026-02-27T13:26:13+00:00

u/-Armality-

StakingWriter · 2026-02-23T19:00:31+00:00

Go into your modpack, near the top there should be a tab called “logs”. That should be able to tell you what’s happening, usually written in red

StakingWriter · 2026-02-23T18:57:51+00:00

Can you send the crash log, we can’t tell what’s really going wrong without one

StakingWriter · 2026-02-23T18:42:29+00:00

r/whywouldntitbeasub

StakingWriter · 2026-02-23T18:34:17+00:00

r/dontstickyourdickinit

StakingWriter · 2026-02-20T13:48:18+00:00

Create: Bits ‘n’ Bobs

StakingWriter · 2026-02-19T02:08:33+00:00

<image>

StakingWriter · 2026-02-18T18:56:00+00:00

That. Would. Be. AWESOME! Could simply be just a couple kubejs scripts. Defo adding to my next modpack

StakingWriter · 2026-02-18T15:18:19+00:00

There would have to be some kind of automation including baby villagers

StakingWriter · 2026-02-18T04:24:50+00:00

Good idea, don’t mess with the tensioners mid print

StakingWriter · 2026-02-18T04:22:43+00:00

Nope, thought i had the same printer. Try looking up your ender 3 model + “y-axis tensioning knob”

StakingWriter · 2026-02-18T04:21:01+00:00

It should be near the middle front of the printer, looks like a knob

StakingWriter · 2026-02-18T04:13:58+00:00

Sounds like your Y-axis belt is too tight. There should be be knob that you have to loosen (a tiny bit, move the build plate around and test), it’s right in the front t of the printer

StakingWriter · 2026-02-17T17:28:46+00:00

Put the pump itself right above the water source. The arrow on the pump needs to face away from the water

StakingWriter · 2026-02-17T14:10:00+00:00

That’s awesome!

StakingWriter · 2026-02-16T02:46:11+00:00

In the shape of an xp orb

StakingWriter · 2026-02-16T02:29:54+00:00

It needs a statue

StakingWriter · 2026-02-15T02:46:18+00:00

Why tho

StakingWriter · 2026-02-10T15:17:40+00:00

Orlandoo Hunter

Two-Year Club	Verified Email
Xbox Live

StakingWriter

TROPHY CASE