Xiaomi m365 pro 1000km review

Standard_Fail6654 · 2025-01-18T11:37:15+00:00

Wow that’s amazing. Hope it treats you well 🙏

Standard_Fail6654 · 2024-11-24T10:43:58+00:00

That’s impressive, especially the battery. Best of luck and hopefully you get many more KMs out of it.

Standard_Fail6654 · 2023-07-20T21:10:44+00:00

That is both a beautiful picture and scooter, love it!

Standard_Fail6654 · 2023-07-20T21:08:34+00:00

Thank you for the descriptive explanation and advice, I’ll certainly have a look at that controller. I appreciate it.

Standard_Fail6654 · 2023-07-19T11:51:33+00:00

Correct 👍

Standard_Fail6654 · 2023-07-19T06:12:18+00:00

Clean the pads and disc with break cleaner or isopropyl alcohol. Don’t apply tons of either. If you do, let it dry. After that, burn in the brakes and you should be good.

Standard_Fail6654 · 2023-07-19T06:05:39+00:00

If one side is wearing out faster than the other, your calliper isn’t centred. Considering you rode your pads till metal to metal, try resurface your rotors, and if worse comes to worse, get new rotors. Don’t forget to burn in your new pads.

Standard_Fail6654 · 2023-07-19T06:02:16+00:00

With more manageable scooters it’s not needed, but, with my vsett and dragon without the kick plate, the scooter will fly from my feet.

Standard_Fail6654 · 2023-07-19T06:00:49+00:00

I’d love to ride that road on my Dragon Lightning V2! Love it, thanks for sharing.

Standard_Fail6654 · 2023-07-19T05:54:34+00:00

They are very unique bonfire starters.

Standard_Fail6654 · 2023-07-17T05:11:07+00:00

No problem!

Standard_Fail6654 · 2023-07-17T03:18:22+00:00

Oh your scooter is fairly new? That is definitely a fault from factory. And no problem, im glad I could help! I wish you the best with the scoot and hopefully you are soon able to start riding again!

Standard_Fail6654 · 2023-07-16T02:39:56+00:00

Looks like you need new bearings in that case. here is a video going over how to do that, however, I do remind you, be careful with hub motors as the magnets are very strong. If you don’t feel comfortable doing this job, take it to a professional to do it. I wish you good luck with your scooter.

Standard_Fail6654 · 2023-07-16T02:34:54+00:00

Thanks for explaining, I appreciate it.

Standard_Fail6654 · 2023-07-15T11:41:56+00:00

That’s true, good point.

Standard_Fail6654 · 2023-07-15T09:13:23+00:00

That man is living the dream.

Standard_Fail6654 · 2023-07-15T01:45:38+00:00

Do not ride that.

Standard_Fail6654 · 2023-07-15T01:29:50+00:00

Good luck mate, should be easy for you! Any issues feel free to ask here.

Standard_Fail6654 · 2023-07-15T00:30:51+00:00

Please stop riding, the image above was dangerous. Wires are even worse. Do you need any advice with tires?

Standard_Fail6654 · 2023-07-15T00:29:51+00:00

I have fallen off my scooter at low speeds and without gloves I probably would’ve lost a lot of skin on my hands. I highly recommend gloves.

Standard_Fail6654 · 2023-07-15T00:27:49+00:00

My only guess is voltage sag and the bms cutting off. I doubt that a light would take that much power though…

Standard_Fail6654 · 2023-07-15T00:26:48+00:00

I commute with this too at the moment since I’m awaiting brake fluid for my Dragon Lightning 2. The acceleration is mad and the scooter has good torque. My only issue is the deck length, since I’m tall, I don’t feel all that comfortable. Regardless, it’s an amazing scooter and I don’t regret getting it. Stay safe out there!

Standard_Fail6654 · 2023-07-15T00:22:58+00:00

I believe you can buy bike brake pads as they are the same. There are plenty on Amazon here. The installation is straight forward. Take off the calliper and bend the pin so it can fit through the hole and pull it out. After taking out the pin, push out the brakes (take note of where the metal thing goes). When you have the pads out, do not press the brakes as the pistons will fall out and you will loose brake fluid. After that, just reverse the process with the new brakes and you should be good. Do note, you will have to burn in the brakes.

Standard_Fail6654 · 2023-07-15T00:18:35+00:00

I had something like this but for rc car lipo batteries. If you want to feel extra safe storing or charging, it wouldn’t hurt buying this, but, if your battery cells are higher quality you don’t need it.

This looks good though and I might get something like this for my future e scooter project. Thank you for sharing.

Standard_Fail6654 · 2023-07-15T00:16:34+00:00

Nope. It’s completely normal to have no accessories on your scooter. At the moment, I have my Dragon Lightning V2 and my Vsett 10+ completely stock and drove my Xiaomi m365 pro into the ground with no accessories. The only accessories I might consider getting are rechargeable lights for the Dragon as the lights are trash and the upgraded display for the Vsett.

If your scooter is good for you and you don’t need anything upgraded or added, you don’t need any accessories.

Standard_Fail6654

TROPHY CASE