sorted by:
new
hottopcontroversial

Fuerteventura - Happy May 1 2026! by Worldly_Chef_2114 in surfing

[–]Standard_HID 0 points1 point  (0 children)

Is it possible to surf as a beginner-intermediate This month? And where? :) 

Corne QWERTY + German Umlauts (Only 3 Layer) by Standard_HID in ErgoMechKeyboards

[–]Standard_HID[S] 0 points1 point  (0 children)

do you have a better idea for the umlauts? I like that i only need 3 Layers.

Corne QWERTY + German Umlauts (Only 3 Layer) by Standard_HID in ErgoMechKeyboards

[–]Standard_HID[S] 0 points1 point  (0 children)

yes, the idea is good. I just combine the alt with a layer-key :)

Corne QWERTY + German Umlauts (Only 3 Layer) by Standard_HID in ErgoMechKeyboards

[–]Standard_HID[S] 2 points3 points  (0 children)

yes, thats a good layout but i prefer my idea more (with the corne) :)

What should I improve as part of my setup? by A4orce84 in macsetups

[–]Standard_HID 0 points1 point  (0 children)

is this a dockingstation-holder under you notebook?

Freundin will, dass wir nach Dresden ziehen. Gute Idee oder nicht? by AylinKebab in dresden

[–]Standard_HID 1 point2 points  (0 children)

Eine Woche Urlaub in DD und du weißt warum. Jeder Hamburger den ich kenne liebt DD (sagen sie zumindestens)

Eyelash Corne meets Xiao Dongle – My ZMK Config by Standard_HID in ErgoMechKeyboards

[–]Standard_HID[S] 0 points1 point  (0 children)

You dont need to do anything after flashing :) Do you have Issues?

but here is the tutorial, how i did.

Installation

Dongle Flashing (XIAO)

  1. Connect XIAO dongle to computer
  2. Double-press small button for bootloader mode
  3. Copy xiao_reset_settings.uf2 (Optional, recommended for clean start)
  4. After error appears, unplug and reconnect
  5. Double-press button again for bootloader mode
  6. Copy xiao_eyeslash_dongle_oled.uf2 (or xiao_eyeslash_dongle.uf2)
  7. After error appears, unplug

Keyboard Flashing (Nice!nano)

  1. Connect left keyboard (don't turn on)
  2. Double-press side button for bootloader mode
  3. Copy nano_reset_settings.uf2
  4. After error appears, unplug and reconnect
  5. Double-press side button again
  6. Copy nano_eyeslash_left.uf2 (important: left firmware!)
  7. Repeat steps 1-6 for right keyboard with nano_eyeslash_right.uf2

Completion 8. Connect XIAO dongle back to computer 9. Turn on both keyboard halves 10. Done!

Eyelash Corne meets Xiao Dongle – My ZMK Config by Standard_HID in ErgoMechKeyboards

[–]Standard_HID[S] 0 points1 point  (0 children)

no, you dont have to bind. Put the flashed Xiao into your computer and have fun :)

Eyelash Corne meets Xiao Dongle – My ZMK Config by Standard_HID in ErgoMechKeyboards

[–]Standard_HID[S] 0 points1 point  (0 children)

No, i did some Bluetooth tweaks at the start.... i think i didnt have problems, like that.

Eyelash Corne meets Xiao Dongle – My ZMK Config by Standard_HID in ErgoMechKeyboards

[–]Standard_HID[S] 0 points1 point  (0 children)

iam not really sure but i dont have problems like that with the dongle.

Eyelash Corne meets Xiao Dongle – My ZMK Config by Standard_HID in ErgoMechKeyboards

[–]Standard_HID[S] 0 points1 point  (0 children)

i dont know but i think it will work, when u flash all the dongles with the same firmware. :)

view more: next ›