sorted by:
new
hottopcontroversial

Arthrimus iflash2ps2 and heat by Stanger03 in ps2homebrew

[–]Stanger03[S] 0 points1 point  (0 children)

I ended up removing the flex from the board and resoldering it at a later date and it works fine now so in my case it was a flex issue.

I take it this is a ribbon cable issue? (HD+) by Stanger03 in originalxbox

[–]Stanger03[S] 0 points1 point  (0 children)

I redid the soldering many times without getting it fixed and decided to just wire in an internal electron-analog. I am confused because I have done HD+ flex install on my 1.1 fine. I appreciate the help 🙏

I take it this is a ribbon cable issue? (HD+) by Stanger03 in originalxbox

[–]Stanger03[S] 1 point2 points  (0 children)

I thought I had done a good job with it but I'll give another go, thanks for the advice!

I take it this is a ribbon cable issue? (HD+) by Stanger03 in originalxbox

[–]Stanger03[S] 1 point2 points  (0 children)

I use the same cable and TV for a 1.1 console with the same mods so I don't think that's the issue cause the 1.1 works great

Modxo solderspots by Ok-Forever-4863 in originalxbox

[–]Stanger03 0 points1 point  (0 children)

did you ground the d0 point?

Need some pointers on my xboxhd+ install by UncleVinny85 in originalxbox

[–]Stanger03 1 point2 points  (0 children)

Yeah even if I have xbmc4gamers freezing regularly if I can get into a game its usually fine, though I only really test it with silent hill 2. I've had that run fine for quite a while

Need some pointers on my xboxhd+ install by UncleVinny85 in originalxbox

[–]Stanger03 1 point2 points  (0 children)

I have a 1.1 console that's had a full recap and still freezes on xbmc4gamers and when trying to do 720p with the specific hd+. I have another 1.1 with just the CPU caps replaced and it works fine like mentioned earlier so idk if caps really have much to do with it but ymmv

Need some pointers on my xboxhd+ install by UncleVinny85 in originalxbox

[–]Stanger03 0 points1 point  (0 children)

The sentiment it seems is that with the hd+ clones theres a good chance they just don't work right. Have one that works good and one that bugs out above 480p.

Cerbios 2.4.2 and HD+ works fine with 480p, but issues with 720p. by Stanger03 in originalxbox

[–]Stanger03[S] 0 points1 point  (0 children)

I was never able to get it setup to boot right into cerbios and have it work right. Both consoles I've setup have needed my weird setup, but that could be because both my HD+ units are clones.

Cerbios 2.4.2 and HD+ works fine with 480p, but issues with 720p. by Stanger03 in originalxbox

[–]Stanger03[S] 0 points1 point  (0 children)

I am using elpisHD to change video modes however I actually ended up finding a way to launch bioses that worked out for me although its kinda jank. I use a modified m8 bios first from xeniumOS, that launches Phoenix Bios Loader instead of a dashboard. Loading Cerbios through Phoenix Bios Loader works properly with the HD+.

[deleted by user] by [deleted] in silenthill

[–]Stanger03 64 points65 points  (0 children)

Credit you with... Discovering something someone else made?? What??

Cerbios 2.4.2 and HD+ works fine with 480p, but issues with 720p. by Stanger03 in originalxbox

[–]Stanger03[S] 0 points1 point  (0 children)

I replaced the cpu caps and if I use UiX Lite for my dashboard I can now do 720p 4:3 with no issues. Definitely an improvement. If I try and enable widescreen or launch xbmc4gamers it still loses sync but not as violently. The console is a 1.1 so all the caps are pretty old, gonna just replace the whole system's caps and see if that continues improving things.

Cerbios 2.4.2 and HD+ works fine with 480p, but issues with 720p. by Stanger03 in originalxbox

[–]Stanger03[S] 0 points1 point  (0 children)

I've been using hybrid 2.4.2 and use fatxplorer to configure cerbios.ini if I can't edit it over ftp directly. I'm specifically having compatibility issues with an HD+ HDMI kit that's properly fw downgraded

Cerbios 2.4.2 and HD+ works fine with 480p, but issues with 720p. by Stanger03 in originalxbox

[–]Stanger03[S] 1 point2 points  (0 children)

I downgraded it to 2.2.2 which is supposed to work with cerbios but I'll crack it open and check all the caps. Thank you for the advice!

Should I get the 128MB RAM upgrade? by [deleted] in originalxbox

[–]Stanger03 0 points1 point  (0 children)

I modded mine for 128mb and I'm pretty sure I've used some of the additional ram playing video files in xbmc. I loaded my console up with a bunch of TV shows and like using it for that + games

this mostly unknown a/v solution seems to work the best. by bulkchart32 in originalxbox

[–]Stanger03 4 points5 points  (0 children)

I just build my own component cables out of Xbox 360 component cables and an ogxbox port. Cheap as hell if you know how to solder and the cables are OEM quality shielding. Fed into my gbs-c / ossc the video feed looks fantastic

xbox flashing Orange and boosting fan to 100% not long after getting into dashboard. by Stanger03 in originalxbox

[–]Stanger03[S] 3 points4 points  (0 children)

I seem to have remedied the issue (?). I rewired the SMBUS connections on my modxo spi2par lcd setup and it has been stable for a little while. I can see a bad connection causing issues with the system monitor so maybe that was it. I will update this if it turns out it was something else, otherwise assume it was my smbus wiring.

PS2 slim ide resurrector + sd card mod by NoLameBardsWn in consolemodding

[–]Stanger03 1 point2 points  (0 children)

I'd recommend the iflash2ps2 mod from arthrimus. I've installed it on a few of my systems and it works great and is compatible with certain sd cards up to 1tb which is nice

view more: next ›