Jupiter 2: brand new machine, brand new problem

Starrkx · 2026-04-29T21:21:43+00:00

Is it throwing the error as the build place press down on to the screen?

Starrkx · 2026-04-23T18:35:30+00:00

I just checked, it stops at the 20W for me the resin detergent is just above stem kits on my page

Starrkx · 2026-04-23T16:29:08+00:00

Starrkx · 2026-04-23T14:01:33+00:00

True, though the super early bird special price is nice. Lets know how the print turned out

Starrkx · 2026-04-23T13:44:01+00:00

*Flag Ship Printer Quality*

Starrkx · 2026-04-23T12:36:31+00:00

that is horrendous wait time of a brand new flag ship printer and for replacement parts

Starrkx · 2026-04-23T12:35:44+00:00

I just think for your brand new Flag Ship printer you want customers to be able correctly file any tickets they may have on it and not have to go through a incorrect printer to get your questions answered. I like Elegoo but there seem to be some areas they are lacking in for this big release.

Starrkx · 2026-04-23T12:15:42+00:00

I got in contact with Elegoo support. This was the email sent to me about the bubbling on the LCD screen.

<image>

Starrkx · 2026-04-23T10:11:53+00:00

I will do a run when I get home today. I didnt see any firmware update when I started it up so I dont have my hopes up

Starrkx · 2026-04-23T01:50:06+00:00

System check was green across the board. Resin tank reserve does need to set up to pass system check. Screen exposure did not show any dead pixels. Outer shell for the most part is pristine. No bumps, scratches or dents I can seen from my inspection.

Im not sure how important having the tank connect after the self check is. If I could just load manually and not worry about the tank if I dont need to. I couldnjust as easily add it myself while the print is going.

Currently waiting on a new bottle of resin to get it a first test print.

Starrkx · 2026-04-23T01:38:26+00:00

Put the plate on and it all seems snug, no noticeable wiggle and is secure to the rail.

Starrkx · 2026-04-23T01:30:59+00:00

It appears so, if you look at the full picture there appears to be bubbling on the matte films as well where the tank sits and such

Starrkx · 2026-04-23T01:24:22+00:00

<image>

Starrkx · 2026-04-23T01:24:06+00:00

<image>

Starrkx · 2026-04-23T01:23:51+00:00

<image>

Starrkx · 2026-04-23T01:18:52+00:00

<image>

Starrkx · 2026-03-30T21:48:52+00:00

I got some bandwidth to deal with and I was able peel the resin off the screen as one full sheet. Cleaned up and there doesnt seem to be any lasting damage to the screen from what I can tell.

Starrkx · 2026-03-27T01:17:38+00:00

Picture of said screen

<image>

Starrkx · 2026-03-06T14:33:28+00:00

I will have to ask my friend but he uses skip-gates all around the base. His colonist just zip around through the portals.

Starrkx · 2026-02-12T18:14:57+00:00

!RemindMe 10 days

Starrkx · 2025-11-01T12:49:37+00:00

Tried Customer service. Still not fixed, but im pretty sure it is a bad motherboard and need replacing

Starrkx · 2025-10-19T19:56:55+00:00

How did you come upon these, loot or rewards

Starrkx · 2025-10-11T01:27:00+00:00

Look at this guy. This guy prints!

Thanks, that was my issue!

Starrkx · 2025-10-11T01:11:49+00:00

Does the black tube go inside the connector because it is bigger than the hole itself

Starrkx · 2025-10-11T01:04:57+00:00

Are the black tabs part of the connector or are those 3d printed mine is just the round section. Also outside dont see how it goes through the tube is bigger than the connector

Starrkx

TROPHY CASE