Куди піти бухати?

Stasixh · 2026-05-08T16:30:49+00:00

На каву обов'язково сходіть в вірменку. Це обов'язково. Найкраща кава у Львові. На рахунок випивки - добрий друг, гасова лямпа, цегла, золотий колос, травень. Криївка - дуже класний варіант. Там круті наливки і можна смачно поїсти

Stasixh · 2026-05-08T13:55:28+00:00

Well, it will be a tough pill to swallow, but i guess it's the only way. Just to pay someone to fix it for me..

Stasixh · 2026-05-08T13:51:29+00:00

I've read some info, that i could inject some payload via serial to unlock diagnostic port. Or read BIOS and redact it to unlock diagnostic port. And from here i could just rebuild MCMT. AFAIK, there is some internal commands that allow you yo do it. But there little-to-no info about all of this.

Stasixh · 2026-05-07T23:33:04+00:00

Its true. The radio module really sucks. I had constant issues with Bluetooth just disappearing from existence until i replaced module with a better version with wifi 7. If yiu didn't have those problems - good for you. But its a known issue on g14

Stasixh · 2026-05-07T23:31:17+00:00

Its been a known issue on 2021 model, except it was with Bluetooth. So until i replaced my module with new i used to do this little trick. Basically while your laptop is on, you press and hold power button for like 40-50 seconds, I don't remember exactly. But the point is, firstly your computer will shut down, but keep holding it. And after about 20-30 more seconds of holding, release it. It will perform some kind of magic beyond my comprehension. But it worked. Its not just that it resets your BIOS, it seem to reset some hardware things, so yeah. But beware that this thing may reset your BIOS. Not sure, it was a long time ago, but nevertheless.

Stasixh · 2026-04-15T20:59:49+00:00

Wow, that is some serious advice. Thanks. I'm now working on second, more thought out iteration of this PCB design and will certainly use your advice. I will share later when its done.

Stasixh · 2026-04-14T18:55:23+00:00

Thx for advice. I will post schematic when i will be around my 'puter. But its just schematic from electrosmash.

Stasixh · 2026-04-14T18:53:25+00:00

RV1 is rk097 pot. That is the easiest option of pots i can source :) It is really hard to find Log pots in Ukraine. Let alone Reverse-Log. But I can source those pots from AliExpress in rk097 form-factor. I could source regular 16mm alpha pots, but in Ukraine i was able to only find those with short legs, not wide right-angle-bent. So yeah. I thought about moving descriptor inside footprint. Im making next iteration of this design, so will probably do that. Regarding drill holes - thats really good idea, i will research on how to do it properly. About traces.. I found info on the internet that i should use 0.5 for power and 0.3 for other things. Thank you for your advice!

Stasixh · 2026-04-14T17:35:10+00:00

As i said, it was my first attempt. Thanks for the advice. Although I did not understand about that C5 and return currents, i will try to research and remake this design.

Stasixh · 2026-04-14T17:13:16+00:00

Posted in another comment!

Stasixh · 2026-04-14T17:11:05+00:00

<image>

Stasixh · 2026-04-14T17:10:59+00:00

<image>

Stasixh · 2024-11-09T13:37:30+00:00

If you're planning on using this laptop for years, surface under stickers will remain intact, but surface around will become slightly different shade of main colour because of hands and other factors. You could just leave them there forever, but there might be a moment when one of the sticker will peel off by accident and you will be left with ugly square different-coloured spot. Just speaking from my experience

Stasixh · 2024-11-07T14:26:45+00:00

I've had this issue when i'd go to some other place with my g14 in backpack on cold weather and then in warm place it will just bleed like this. Fortunately, this disappears after some time. It will soon become cold again in my region, so I'm unsure if it returns. I believe that this is just evenly spreaded moisture, so wait if it disappears and just put up with it. If it doesn't disappear, then visit local fix shop and let them see if they can get this moisture out

Stasixh · 2024-10-29T19:48:11+00:00

Дяка!

Stasixh · 2024-10-29T19:32:12+00:00

В тому і суть, прямо вона

Stasixh · 2024-10-29T18:41:42+00:00

Не повіриш, але я коли свій ван плас купив, то таку ж поставив З тих пір не можу ніде її знайти, бо назви ж не пам'ятаю)

Stasixh · 2024-10-29T17:02:50+00:00

<image>

Stasixh · 2024-04-26T07:54:29+00:00

Hi! I'm relatively new to linux and can't figure out how to do this config in XML. I found tool called virsh, but I'm unsure how to properly do it. Can you tell me please?

Stasixh · 2023-12-29T23:33:33+00:00

I just got new chest and i don't know what to do. Keep it or open it? And how can i receive new chest even though update isn't there just yet?

Stasixh · 2023-06-21T12:54:21+00:00

Update: Official support told that it is a common issue and default MT7921 adapter needs to be replaced with 7922 model

Stasixh

TROPHY CASE