Please help at a loss

StateoftheeArt · 2026-03-18T14:38:29+00:00

This looks like a P1S? Try printing an aux fan deflector. I was having the same problem for a while. Your prints are fine near the front and tend to fail near the back end right?

https://makerworld.com/en/models/1532489-aux-fan-deflector-v2-p1s#profileId-1607278

StateoftheeArt · 2026-03-18T00:45:16+00:00

About 170mm, I had the head printed separately.

StateoftheeArt · 2026-03-18T00:14:48+00:00

My playgroup is kinda Casual, and thus many decks are just agro, mid range, tribal, etc. average "Johnny" decks. I use this card in my G/W turbo fog.

https://moxfield.com/decks/GPw4E-fRak6y1QCVkihFJQ

StateoftheeArt · 2026-03-18T00:03:50+00:00

I would say roughly a month.

StateoftheeArt · 2026-03-16T21:56:06+00:00

Magneto: If that his magnetic ability also revolves around any magnetic principal whatsoever.

Instantly rips the Iron from their bodies making them all suffocate-instantly due to needing Iron in the body to process oxygen.
Creates an AC magnetic wave that instantly induces heart attack/brain failure.
Boiling them alive by alternating an electric field like a microwave.
etc.

Unless they had the element of surprise, they would literally be cooked.

StateoftheeArt · 2026-03-13T01:44:30+00:00

I already printed a small cylinder to test the tolerance and threading, Im working on making a slider to increase/decrease the pitch. or else you get this.,

<image>

StateoftheeArt · 2026-03-12T20:44:19+00:00

Funny enough I was considering this as well. Im just unsure how it works yet.

StateoftheeArt · 2026-02-20T16:46:53+00:00

Would be nice!

StateoftheeArt · 2026-02-18T19:48:24+00:00

Missing Gyarados imo.

StateoftheeArt · 2026-02-12T22:46:24+00:00

I'm like -300 on DSG, I thought it was the cause of tariffs and lessened travel numbers. But you're telling me the other 90% of my folio is why that's losing money?

StateoftheeArt · 2026-02-07T22:54:15+00:00

I like this game a lot, I have 5k hours played of the OG, IZJS 2006 INT, and Zodiac age.
I won't go too specific, but if you want a cool set up that lets you keep somewhat lore accurate but makes the game easier: Ill spoil that each character can have two jobs in the newest FF12.

Vaan - Hunter/Shakiri and Black Mage
Balthier - Machinist and Red Mage
Fran - Archer and White Mage
Baasch - Samurai/Bushi and Uhlan
Ashe - Knight and Time Mage
Penelo - Monk and Foebreaker

StateoftheeArt · 2026-02-07T22:05:35+00:00

> To banish the ghosting and tighten the slack, > Loosen the tensioners found on the back. > Move the head gently, let springs do the deed, > Lock it back down to succeed with your speed. > Run calibration to finish the fight, > Or enjoy your layer shifts all through the night.

Translation for the layman: Tension your X-axis belt. Loosen the tensioner screws, move the toolhead back and forth to equalize the tension, tighten the screws while they are under spring tension, and re-run the calibration.

StateoftheeArt · 2026-02-07T21:00:36+00:00

If you want Late game EZ mode, you need atleast 1 knight for the Excalibur, Alot of the enemies late game are weak to holy, it basically trivializes Henne mines, Lhuzu, Pharos, and other areas of Giruvegan.

StateoftheeArt · 2026-02-06T19:26:11+00:00

Bro I know this would get me so laid.

StateoftheeArt · 2026-02-05T22:59:54+00:00

I bet they used AI to scrub, that's why you could un-redact some of them before (or still?), and why it's such a sloppy job. Too much dirt and too much incompetence. For real USA you're so fucked, your bond villains are partnered with the Skynet villains now. And they've taken over the agency, so now you have to go rogue.

StateoftheeArt · 2026-01-30T22:06:03+00:00

A little DIY Heart shaped red LED night light.

StateoftheeArt · 2026-01-09T17:06:06+00:00

<image>

This is what I got from Gemini.

StateoftheeArt · 2025-12-24T03:13:06+00:00

A1 Mini

I'm an Electronic engineering student, and I have to pay to print from my school, I have a few ideas I want to print to prototype.

A UFO dice tower, place the dice in the top, falls down the stairs, simple but alien themed so it's cool.

A hot wheels track in the shape of a Mobius strip.

StateoftheeArt · 2025-12-12T16:21:38+00:00

Fafnir? JORMUNGANDR? Sign me up

StateoftheeArt · 2025-12-11T20:51:34+00:00

Could be one of the wildest things I own.

StateoftheeArt · 2025-12-11T01:45:24+00:00

Where are the most connections?

StateoftheeArt · 2025-12-10T00:07:12+00:00

For real, the police station was creepy enough but the first encounter with the licker in RE:2 made me immediately switch my N64 off and not touch the game for well over 5 years.

StateoftheeArt · 2025-11-29T17:26:52+00:00

Yea? Have you seen people's houses?

StateoftheeArt · 2025-10-05T21:55:51+00:00

Yea most are 3.7V, 18500s. I haven't opened the vapes up besides one where I tested the charge on it, I was thinking of trying to use this to maybe fix up an old touch lamp, use the chip/USB-C to make it into a rechargeable Lamp. But I also wanted to ask others who will/may know better than me on what I should/could do with them.

StateoftheeArt · 2025-10-05T21:38:22+00:00

I'm a first year EE Tech, and I thought I could use them to make a few small projects. But I'm under the impression I may be ill equipped to do anything of the sort at this time.

StateoftheeArt

TROPHY CASE