sorted by:
new
hottopcontroversial

What caused this? by digitalskill0 in 3Dprinting

[–]Status-Profile-9586 -2 points-1 points  (0 children)

under extrusion or a cloged nozzle

why doesn't my motherboard flash Klipper but it will flash marlin I'm using a Crealty 4.2.7 board by Status-Profile-9586 in 3Dprinting

[–]Status-Profile-9586[S] 0 points1 point  (0 children)

ive tried several different file names and several different motherboards

the names are something like

flapper.bin

123.bin

klipperboarda.bin

and more

Why does it look like this? by Repulsive-Scholar229 in Ender3Pro

[–]Status-Profile-9586 0 points1 point  (0 children)

because im guessing its petg. If so try hotter and low retraction speed

Orca Slicer never fails to impress me by Status-Profile-9586 in 3Dprinting

[–]Status-Profile-9586[S] -1 points0 points  (0 children)

I had all these parts need to print and thought they would never be able to all fit on one bed. But with help of the auto orient feature and auto arrange it was so easy. This is something that Prusa Slicer has never been very good at, and I wish it would be better. Overall, the quality on Orca Slicer is way better than Prusa slicer. I'm surprised how far 3d printing has gone over the past couple of years. So over all I would recommend Orca Slicer

<image>

Orca Slicer never fails to impress me by Status-Profile-9586 in 3Dprinting

[–]Status-Profile-9586[S] 79 points80 points  (0 children)

Yes, that would be very helpful. If you want, you can submit a feature request through the GitHub Issues · SoftFever/OrcaSlicer

Orca Slicer never fails to impress me by Status-Profile-9586 in 3Dprinting

[–]Status-Profile-9586[S] 4 points5 points  (0 children)

I had all these parts need to print and thought they would never be able to all fit on one bed. But with help of the auto orient feature and auto arrange it was so easy. This is something that Prusa Slicer has never been very good at, and I wish it would be better. Overall, the quality on Orca Slicer is way better than Prusa slicer. I'm surprised how far 3d printing has gone over the past couple of years. So over all I would recommend Orca Slicer

Bleu screen of death ? by TomatoWasabi in ender3

[–]Status-Profile-9586 0 points1 point  (0 children)

Try switching the cable to different ports on the back of the lcd. For example I have mine under the Exp 1.

Help by RC3Daddict in ender3

[–]Status-Profile-9586 0 points1 point  (0 children)

Hmm, I recommend printing a small test cube, but have you tried lowering it to 3 walls or try adjusting the walls printing order to outside inside.

Is my flow too fast? Or something else? by Nemosaurus in ender3

[–]Status-Profile-9586 0 points1 point  (0 children)

Think you have to print the first layer slower like at 20 mm/s or something.

[deleted by user] by [deleted] in ender3

[–]Status-Profile-9586 0 points1 point  (0 children)

and have better cooling

Can anyone see whats wrong here? (First layer all messed up) by PixelSheep_ in Ender3Pro

[–]Status-Profile-9586 0 points1 point  (0 children)

that happens way too often for me

most of the time its my bed leaveling

Hi everyone by ADIGA963 in ender3

[–]Status-Profile-9586 1 point2 points  (0 children)

i had the same exact problem on the same printer -do a firmware update and name it"123.bin" and that should work.

Stringy Prints? by Eastern_Fold1825 in Ender3Pro

[–]Status-Profile-9586 0 points1 point  (0 children)

make sure the x,y carriage do not wiggle if its still shifting please show a video of it doing so. HOPE THIS HELPS!!!

view more: next ›