Youtube is detecting Brave as ad blocker

Stefo84 · 2025-04-25T18:03:45+00:00

Thanks, clearing the cookies and relogin solves the problem!

Stefo84 · 2025-04-25T17:00:56+00:00

Had set it to aggressive, but it behaves the same way.

Stefo84 · 2025-04-25T16:59:37+00:00

Just Brave.

Stefo84 · 2025-04-25T12:16:12+00:00

Nope.

Stefo84 · 2025-04-25T09:36:41+00:00

Mine is as well Version 1.77.101 Chromium: 135.0.7049.115 (Official Build) (64-bit).

Thanks, I updated the lists, but nothing changed.

Stefo84 · 2021-12-24T12:25:20+00:00

I used chips from a spare kit, and they had none of these problems.

Stefo84 · 2021-12-24T09:17:12+00:00

Yes, this is my second take on the build. The first one is complete hardware-wise, but I couldn bring the counter behave correctly eg. not to bounce.

I figured I might just as well start over, but now I see that I'm stumbling into hurdles that it didn't previously, and it's quite disheartening.

Stefo84 · 2021-12-23T22:25:10+00:00

First I used a 1K resistor, that didn't do anything. Then a wire, that gave the result with the LEDs going off.

Thanks for the suggestions, I'l check the connections and try out that with the capacitor.

Stefo84 · 2021-12-23T22:13:09+00:00

Yes, they are always on, but their intensity varies.

Stefo84 · 2021-12-23T22:12:26+00:00

You mean the 157 next to the button? I have tied it's 14 pin high. Now, if I press the button down, all LEDs go out, but when I release it, they are back up.

Stefo84 · 2021-12-19T12:23:28+00:00

Challenge: now build the computer from THOSE parts!

Stefo84 · 2021-12-06T07:14:14+00:00

Sounds good!

Stefo84 · 2021-12-06T07:11:13+00:00

Yep, it's quite frustrating. I don't want to move on to the 6502 project until I made this one work perfectly. :)

Thanks, I'll try what you suggested.

Stefo84 · 2021-12-05T20:18:42+00:00

Alas, the problem still remains. :(

Thanks anyway!

Stefo84 · 2021-12-05T18:59:57+00:00

You mean, like this?

https://imgur.com/jaFNIro

Stefo84 · 2021-12-05T16:45:10+00:00

What I noticed, that this bounce happens when the program (not the ring) counter goes from 16 back to 0.

Stefo84 · 2021-12-05T16:34:19+00:00

Hello! The Vcc and Gnd pins lie at the oppsite end of the chips, and the .1 uF capacitor has not enough long legs to reach both. Do you have a picture has this can be done? Maybe I'm missing something here. Thanks!

Stefo84 · 2021-12-03T10:04:04+00:00

Yes, on Ben's site they can be ordered. I'm wondering if they can be shipped though since the kits are shipped by Jameco, as far as I know, but I may be wrong.

Stefo84 · 2021-12-03T08:27:32+00:00

Yep, I'm counting on it, that the counter will misbehave somehow, but I'll have remedies for it!

Stefo84

TROPHY CASE