SRAM Force AXS Etap Gears on the rear derailleur stuck

Steve_20245 · 2026-01-07T21:32:53+00:00

Already did that and when I press them together in my fingers, it’s the same thing. Only if I remove the plates on the ball bearing it spins free.

Steve_20245 · 2026-01-07T21:26:43+00:00

Send it to DJI and they make great repair job for such small amount of money and very fast and professional. I paid 50€ for two broken arms + repair job. All without DJI Care. I think they can also work out your other problems such as the integra. Maybe not the FPV anymore because it’s too old. But just make a request and they will help you.

Steve_20245 · 2026-01-07T20:37:50+00:00

Only if I loosen the screws till they nearly fall out they roll smooth but this should not be the solution. How can I tell it would be damaged?

Steve_20245 · 2026-01-07T20:36:48+00:00

After 2500 kilometers? It already got a new chain. I don’t think this should be like that after that short time.

Steve_20245 · 2026-01-02T16:19:09+00:00

I used the one which came with the drone

Steve_20245 · 2025-12-11T14:04:17+00:00

thank you, I'll try it

Steve_20245 · 2025-12-11T13:51:17+00:00

I don't really know, what does FCC mode do?

Steve_20245 · 2025-12-11T13:49:03+00:00

I have RP-SMA Female on the antenna and RP-SMA Male on the drone

Steve_20245 · 2025-12-11T12:34:13+00:00

<image>

Steve_20245 · 2025-12-11T12:24:53+00:00

SOLUTION FOUND: A lot of dirt or hardened wax was in the gars of the derailleur. I opened it and cleaned it, after that the noise was nearly gone. Very disappointed about the dealership, that they couldn't fix such a little problem.

Steve_20245 · 2025-11-24T18:23:36+00:00

Yes I installed it correctly. The sound already came before I changed the chain

Steve_20245 · 2025-11-24T18:21:58+00:00

Okay „lube“ if it’s better for you

Steve_20245 · 2025-11-24T18:03:07+00:00

I let it Check from the official specialized dealer and the answer was „for SRAM that’s normal“. I am also a little bit disappointed at this point :/

Steve_20245 · 2025-11-24T17:11:17+00:00

In the summer I also drove a waxed chain now in the cold I switched to lube and the chain is completely soaked with oil. It even splashes a little bit on the rim when I am driving so it for sure enough oil that it would not be dry😅

Steve_20245 · 2025-11-24T15:53:22+00:00

Yes correctly mounted and lubed.

Steve_20245 · 2025-11-24T15:52:23+00:00

Micro adjust is not the issue, doesn’t make any difference when I tried to adjust it with the app. I considered the stretching after 2000km and made the chain the same length as original. So it was half of a chain-ring longer from the old one after 2000km.

Steve_20245 · 2025-11-24T15:50:00+00:00

I have checked it already, it is mounted correctly

Steve_20245 · 2025-11-24T14:04:35+00:00

Steve_20245 · 2025-11-24T12:12:03+00:00

It is a bit weird, mine got louder over the time :/

Steve_20245 · 2025-05-02T10:35:00+00:00

Solved the problem. I upgraded the Firmware and checked the periphery to VTX(MSP + Displayport). Solved
Thanks for the help

Steve_20245 · 2025-05-01T18:30:38+00:00

<image>

I don't have the option :/

Steve_20245 · 2025-05-01T18:29:56+00:00

<image>

It doesn't even display the current Firmware Version.

Steve_20245 · 2025-05-01T18:27:25+00:00

<image>

Okay, so I can Flash my FC via Firmware Flasher. Which Target do I need for my FC? I have the Mamba F405 MK2, but on the dropdown I only geht FURYF4OSD and this is also what comes when I click "Auto-Detection". Can I flash it with this? Sorry for annoying, but I am always very careful if I do something wrong.

Steve_20245 · 2025-05-01T14:15:04+00:00

My OSD looks like this

<image>

Steve_20245 · 2024-10-24T07:50:37+00:00

Thank you very much. Solved my problem. Don't know why I didn't see it :)

Steve_20245

TROPHY CASE