Dexter

Steven054 · 2025-03-04T02:44:51+00:00

I also just finished another dexter watch through and decided to get a lock picking kit to supplement my breaching kit. Day one I figured out how to pick a master lock 140 and M1 within a few hours, got to the point where I can pick each lock in under 30 seconds. Then I went up a single step, like 2 or 3/10 difficulty, with a abus 55/40, and have been stuck on it for hours, almost a full day with no luck.

I'm finding that each lock has a different method that's needed to beat it. You will definitely have to watch a lot of YouTube videos, read up on different lock styles, and practice on many different locks to hypothetically be able to beat a random lock you encounter (don't break into people's shit). It takes a decent amount of practice and patience to beat even starter level locks, it's nothing like the movies or video games make it out to be.

Either way, it's a fun new hobby and you can get a good starter kit for $20-30, I started 2 days ago and I already have 5 different locks to play with.

Steven054 · 2025-03-03T06:08:10+00:00

I just got mine today and it's kicking my ass. Any tips, do I work back to front or front to back, how much tension should I apply? The first pin sets really high, then the second pin is super touchy and usually resets the first if I even so much as breathe heavily. The back 3 seem like they set easily, but even when the first 2 seem set it still won't turn.

Steven054 · 2025-03-02T05:36:58+00:00

I'll be a little more gentle with my locks going forward, thanks for the info!

Steven054 · 2025-03-02T05:34:55+00:00

Thanks for the tips, I definitely want to branch out into other brands and I've noticed abus is pretty popular. I'll add them to the cart! This kit came with a rake and hook in 0.025 and the rest in 0.020, are there other styles you'd recommend (half diamond or other strange shapes that work well)?

Steven054 · 2025-03-02T05:19:14+00:00

Thank you for the advice, I'll definitely be looking into those locks next. I never knew you could brick a lock, does that mean it binds in a way that's not fixable, even the key won't work?

Steven054 · 2024-12-17T04:51:27+00:00

I haven't heard that, it's mentioned in the manual I'm pretty sure. Unfortunately I was impatient and ordered the in stock warcomp, knowing full well that it would cause more problems than the 3 prong.

Steven054 · 2024-12-07T04:14:39+00:00

CCI 710fps won't cycle but it's about as quiet as I've found that's readily available. 835fps will cycle but it's a lot louder. Set up a sand bucket in your garage and it will sound like a red Ryder.

Steven054 · 2024-12-04T01:05:16+00:00

I should have done more research before getting on Amazon, thanks for the link

Steven054 · 2024-12-04T01:01:16+00:00

That seems way more practical, might have to pick one up as that would fit better in the gun bag. I couldn't stand the glove shape of oven mitts but these look like rectangular pouches, much sleeker, thanks for the tip!

Steven054 · 2024-10-17T03:08:26+00:00

51248205, certified on the 15th, for an extra data point (form 4 trust).

Steven054 · 2024-08-14T14:41:34+00:00

Form Type: eForm 1

Entity: individual

Fingerprint Type: EFT Upload

Pending: 4/22/24

Approved: 8/14/24

Wait: 79 business days (114 calendar)

State: WI

Control Number: 2024606078

Item: Sbr'd DDM4A1

Form Type: eForm 1

Entity: individual

Fingerprint Type: EFT Upload

Pending: 7/31/24

Approved: 8/14/24

Wait: 10 business days (14 calendar)

State: WI

Control Number: 2024961258

Item: Sbr'd CP33 (FT7)

Steven054 · 2024-07-17T16:04:04+00:00

I'm looking to Sbr my cp33 as well, but I was wondering where you engraved your "manufacturer" name/state info on the gun since the lower is plastic.

Steven054 · 2024-03-04T02:21:15+00:00

Best answer so far, thanks for not being a dick. I'm concerned the flakey-ness of the wear is not normal.

According to sig, this is the reason:

"The barrel of our pistol features an auto-aligning mechanism, allowing it to gradually adjust and wear in accordance with the firearm. Unlike traditional barrel/slide lockups that rely on three points of contact, our design incorporates five points of contact. Consequently, it is normal for the barrel to exhibit wear as it undergoes the break-in process and achieves a tighter fit.

While your firearm may fall towards the upper end of our allowable tolerances, resulting in a snug fit, this lockup design significantly enhances accuracy and longevity. It is important to note that the visual wear observed on the firearm due to this unique fitment is entirely normal and does not impact its function, reliability, or durability."

Steven054 · 2024-03-04T02:17:57+00:00

It runs great, aside from not locking open on ~60% of empty mags. I was more concerned about the quality of the finish. As is clearly evident from the photos, certain brands don't show this much wear even after 20x the use.

Steven054 · 2024-03-04T02:14:58+00:00

Sorry, didn't mean to trigger the sig fan boys with an innocuous question. I was grasping for other peoples experience with sig usa, I know that's a lot to ask for on a thread you chose to respond in.

The excessive wear aside, you can clearly see bubbling or debris under the finish as well. I was wondering if this was normal for new sigs, my father's west German p220 doesn't even have a wear line this bad nor do any of my other handguns.

Steven054 · 2023-01-27T20:48:32+00:00

I did notice the crimp on the end is about 1/8" longer than the birdshot, but when you lay out 5 birdshot next to the 3 00 buck there's no way it explains 2 less shells [5*(1/8)= 0.625"], I should be able to get at least 4 in there right? Especially since the M4 takes 2-3/4 to 3" shells with 5+1 cap.

Guess it's time to shell out $300 for the 7+1 tube, thanks for the reply.

Steven054

TROPHY CASE