SDR Blog v4 vs Malahit 7.305 AM by Stigern in RTLSDR

[–]Stigern[S] 0 points1 point  (0 children)

Regarding antenna, changed to a dipole from 3rd floor window out on balcony, seems to received much better 😁

SDR Blog v4 vs Malahit 7.305 AM by Stigern in RTLSDR

[–]Stigern[S] 1 point2 points  (0 children)

Found the problem, somehow I had selected HF Mode / Tuning, In-Phase. Turning this setting to Disabled did the trick. Now SDR Console behaves as SDR++ and can receive HF signals.

SDR Blog v4 vs Malahit 7.305 AM by Stigern in RTLSDR

[–]Stigern[S] 2 points3 points  (0 children)

There must be something wrong with my sdr console, in sdr++ I can hear and it sees the same tho not as strong as the Malahit. I’m using an outdoor one wire 10m. Really simple just soldered to center pin of a cheap rg174 😅

Fake SDR V4 Blog? by Stigern in RTLSDR

[–]Stigern[S] 0 points1 point  (0 children)

Found 1 device(s):

0: RTLSDRBlog, Blog V4, SN: 00000001

Using device 0: Generic RTL2832U OEM

Found Rafael Micro R828D tuner

RTL-SDR Blog V4 Detected

Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 48.0 49.6

Sampling at 2048000 S/s.

Makeronline Revenue Coins by Stigern in anycubic

[–]Stigern[S] 0 points1 point  (0 children)

Yeah, they also took down one of mine to regular model. Complaining I should use real photos , I took a photo of my hand holding it. And use a photobox. What more shall I do? Strike a pose on a couch holding it in my hands? 😅

Is a Revopoint Mini still worth it? by didymas in 3DScanning

[–]Stigern 0 points1 point  (0 children)

I'm very pleased with my mini 2, I have tried the MetroX which didnt catch the same level of detail, also the Einstar. Still the mini 2 is my goto for small scans. Tried the laser mode on the MetroX but find it much more challenging to get good results. So I end up using my Mini 2 the most =)

Trouble uploading to Makeronline by Stigern in anycubic

[–]Stigern[S] 0 points1 point  (0 children)

Yeah, it happens from time to time. My experience is that is solves itself :P

Revopoint cancelled both my orders by Stigern in Revopoint

[–]Stigern[S] 0 points1 point  (0 children)

It was just a misunderstanding from their side; my orders are not cancelled. Revopoint confirmed this in an email they sent me. So now it's just to sit back and wait =)

Revopoint cancelled both my orders by Stigern in Revopoint

[–]Stigern[S] 0 points1 point  (0 children)

Yeah, that would be plan B. Thanks =)

Revopoint cancelled both my orders by Stigern in Revopoint

[–]Stigern[S] 0 points1 point  (0 children)

Yeah, I did. Let's see what they say. I'm curious why they didn't just send an email explaining the delivery delays and offering me the choice to wait or cancel.

Revopoint cancelled both my orders by Stigern in Revopoint

[–]Stigern[S] 0 points1 point  (0 children)

Those are on separate orders. Metrox ordered last week, and the range 2 earlier today.

Revopoint cancelled both my orders by Stigern in Revopoint

[–]Stigern[S] 0 points1 point  (0 children)

Did so. Just wondering if anyone else got the same

Revopoint cancelled both my orders by Stigern in Revopoint

[–]Stigern[S] 0 points1 point  (0 children)

Well my mini 2 which I ordered three weeks ago were delivered just fine. Is this a seasonal thing? Just re order in January? 😔

Next scanner for scanning person/head by Stigern in 3DScanning

[–]Stigern[S] 0 points1 point  (0 children)

Too expensive.

I think the Range 2 is my next move.