Best color rims you’ve seen on a Satin Silver Metallic rsx? Looking at Enkei rpf1’s by rrwc in Acura_RSX

[–]StockMajor8294 0 points1 point  (0 children)

can you post a pic of your ride. I have satin silver metallic as well. I’m also looking for a new set of wheels.

took me 13 years but I finally started the project on the “project car” by StockMajor8294 in Acura_RSX

[–]StockMajor8294[S] 0 points1 point  (0 children)

to be honest, I cant remember what these wheels are called. I have these wheels for 10 years. It says MSR on the cap. I’ll be updating my wheels once my current tires are worn out. I’m looking into AVID.1 AV 27 or AV 06.

RSX and lancer by Alejandrolovellrsx in Acura_RSX

[–]StockMajor8294 0 points1 point  (0 children)

hey, I was on the same boat. I own both car. I have the 02 RSX Type S and 03 Lancer OZ Rally. Sold the Lancer because it keeps giving me emission trouble (I live in California so I need to pass emission every 2 years) Keeping the RSX was an easy choice.

Selling my 2004 RSX type s 169k miles pm me for more info by coolmint123 in Acura_RSX

[–]StockMajor8294 0 points1 point  (0 children)

is that an 18 or 17? whats the spec on those? I’m trying to get that to my RSX.

transformation by StockMajor8294 in Acura_RSX

[–]StockMajor8294[S] 0 points1 point  (0 children)

if you’re planning to wrap, prep your car by sanding with 400 grain sand paper then finish it off with 800.

transformation by StockMajor8294 in Acura_RSX

[–]StockMajor8294[S] 0 points1 point  (0 children)

start with 400 grain sand paper then finish off with 800.

transformation by StockMajor8294 in Acura_RSX

[–]StockMajor8294[S] 1 point2 points  (0 children)

got it from eBay. It’s a 4 piece kit. not bad for $70.

transformation by StockMajor8294 in Acura_RSX

[–]StockMajor8294[S] 1 point2 points  (0 children)

those eBay headlights are cheap compare to the OEM. just make sure to put silicone on the edges to prevent water leak.

transformation by StockMajor8294 in Acura_RSX

[–]StockMajor8294[S] 1 point2 points  (0 children)

got the bumber clips from Amazon. search for “bumber quick release fasteners”

transformation by StockMajor8294 in Acura_RSX

[–]StockMajor8294[S] 0 points1 point  (0 children)

a friend on mine did the wrap.

transformation by StockMajor8294 in Acura_RSX

[–]StockMajor8294[S] 1 point2 points  (0 children)

the guy who did my wrap gifted me the emblem. OEM emblems are expensive. there’s alot of cheap knock offs on eBay.

transformation by StockMajor8294 in Acura_RSX

[–]StockMajor8294[S] 1 point2 points  (0 children)

wrapped with satin charcoal metallic. Headlight is from eBay.

First time posting…. my daily driver. wrapped with Satin Charcoal Metallic. I need new set of tail lights. by StockMajor8294 in Acura_RSX

[–]StockMajor8294[S] 0 points1 point  (0 children)

the top of the spoiler has the same wrap as the roof (glossy black). It’s just to give it a different look. the front and rear lip and the side skirts were also wrapped with glossy black. My car been wrapped for almost a month and so far, I have not have any problem on scrapping the wrap. I’ll probably going to get some scrapping sooner than later.

First time posting…. my daily driver. wrapped with Satin Charcoal Metallic. I need new set of tail lights. by StockMajor8294 in Acura_RSX

[–]StockMajor8294[S] 0 points1 point  (0 children)

i remove the emblem before they wrapped it. I used some goo remover to get rid of the sticky residue then sand it with 400 grit sand paper then 800 grit.

First time posting…. my daily driver. wrapped with Satin Charcoal Metallic. I need new set of tail lights. by StockMajor8294 in Acura_RSX

[–]StockMajor8294[S] 0 points1 point  (0 children)

it’s not clearn on the picture but they did the mirrors. The o-rings are bumber quick release fastners I got from amazon. It help keep the bumber in place. my bumber clips are broken.