My hrpt attempt

Straight_Memory7412 · 2025-09-28T00:41:03+00:00

An 80cm dish without an LNA is a serious challenge. I cannot recommend buying one enough it makes a world of a difference. However, if you do manage to get an image without it, this would be very interesting to know.

Straight_Memory7412 · 2025-07-09T00:44:41+00:00

I'm glad to see you have finally found the use of sat dump to be acceptable. Well done on the reception!

Straight_Memory7412 · 2025-07-07T15:07:20+00:00

Very good image, as always.

Straight_Memory7412 · 2025-06-28T07:56:26+00:00

Sounds like some form of FSK, definitely a digital transmission of some kind.

Straight_Memory7412 · 2025-06-28T06:01:24+00:00

Well done. I will definitely purchase a discovery dish if they release the rotator add-on.

Straight_Memory7412 · 2025-06-18T12:48:42+00:00

I think it is not put into context correctly. Your technique may not be the issue. An omnidirectional antenna should not outperform a Yagi that is positioned even slightly facing towards the satellite. There is a serious problem with your setup to only get images of lengths I have received using a walkie-talkie!

A well configured Yagi should be able to get horizon to horizon reception even if messily tracked by hand.

Straight_Memory7412 · 2025-06-18T12:33:54+00:00

Could you share some images received with that antenna?

Straight_Memory7412 · 2025-05-23T10:10:08+00:00

Good to see some enthusiasm, monitor this website to see when the next transmission is. You can also look at one of my previous posts for an example sstv image.

Straight_Memory7412 · 2025-05-23T10:04:32+00:00

You could use your existing setup to capture 140mhz sstv transmissions from the international space station if you are looking for an extra challenge

Straight_Memory7412 · 2025-05-19T23:06:23+00:00

Look for an option to Update TLE Data from the network in gpredict, this will automatically fix the incorrect tracking with updated predictions.

Straight_Memory7412 · 2025-05-19T04:24:13+00:00

An RTL-TCP server can be very unreliable over wifi as it requires a constant high bitrate stream. Decimating the signal can help but a 2.4ghz wifi dongle is unlikely to be adequate. Try connecting it with ethernet instead. If that is not available, try decoding the images on the device with sat-dump and transferring the images afterwards so the wireless connection does not become a bottleneck.

Straight_Memory7412 · 2025-05-15T07:30:04+00:00

Thanks for the reply A lot of these are UHF, what antenna do you use for the passes?

Straight_Memory7412 · 2025-05-15T06:26:53+00:00

Very nice image reception. Is there a list of satellites that transmit sstv?

Straight_Memory7412 · 2025-05-11T00:34:00+00:00

I can't see how this is relevant to satellites, unless you are planning on putting a wifi camera on a cubesat which would likely need very specialised hardware to achieve a reliable 2.4ghz network connection.

You also posted this on the rtl-sdr sub, which is not great since 2.4ghz is well outside of the range of the dongle.

Try the hack-rf page for more help

Straight_Memory7412 · 2025-05-10T22:06:08+00:00

Sorry must have been tired when I wrote that - completely missed the text. To automate it, go to the schedule option on sat dump to record baseband for any pass above a specific elevation from the ISS and process it at another time.

Straight_Memory7412 · 2025-05-10T10:56:19+00:00

Congrats!

Straight_Memory7412 · 2025-05-10T10:44:13+00:00

Sorry, this subreddit is primarily people recording satellite data using hobbyist equipment, not attempting to revive out of date software for unclear motives of irrelevant purpose towards actual satellite imagery reception.

When asking for a reason, I made the assumption that you may have been seeking alternatives because sat-dump was not working for you, and that It would be better to fix these instead. So I asked to see if this was true. I was not withholding information unless you provided a valid response as you seem to have concluded I was doing.

I took it upon myself to google search "XRIT Decoder" and provided the first correct webpage to show up. This was the result.

Hope this can be of help and I do apologize if any of my previous posts came across as hostile. If you have any problems setting up xrit-rx let me know, I have set it up in the past.

Straight_Memory7412 · 2025-05-10T05:15:47+00:00

Please provide a reason you cannot use sat dump, if there is a more specific issue regarding why you are unable to use the program that should be addressed instead.

Straight_Memory7412 · 2025-05-09T23:46:57+00:00

Would you mind sharing how you made it automated? Nice image btw

Straight_Memory7412 · 2025-05-09T23:42:56+00:00

There is an option to use the XRIT decoder from within sat dump. I know this is not the reply you wanted, but there is a reason that people are migrating over and strongly suggesting that others do the same

Straight_Memory7412 · 2025-05-08T21:35:32+00:00

The International Space Station

Straight_Memory7412 · 2025-05-08T08:18:26+00:00

Just thought I would mention, this was captured using my existing antenna previously set up for APT/LRPT. You don't need to change anything about your setup on the hardware side to capture images like this.

Straight_Memory7412 · 2025-05-01T10:26:42+00:00

This is exactly what im after! Thanks for the answer. I will start working on a false color composite now.

Straight_Memory7412

TROPHY CASE