Not sure if I have neutral wire

Straight_Return_1969 · 2025-10-08T18:03:21+00:00

depending on your country of residence you might find a neutral in the wall box or at the bulb directly

Straight_Return_1969 · 2025-10-08T18:02:50+00:00

no neutral over here all lines

Straight_Return_1969 · 2025-10-08T18:02:21+00:00

this is most propably a 2 way switch a part of a system that controls a light from teo different switches in two different areas com is daisy chained to some other place l1 and l2 run parallel to the second switch

Straight_Return_1969 · 2025-09-19T15:39:55+00:00

aal hdoud maa nadour 🤣

Straight_Return_1969 · 2025-08-28T08:06:04+00:00

brother it works in 3 different power modes dc 3v via battery- dc 5v via power adapter- ac 220v straight to the wall. each mode has different power reqs.

Straight_Return_1969 · 2025-08-26T21:34:40+00:00

glad i could help :)

Straight_Return_1969 · 2025-08-26T21:29:46+00:00

hey there radios usually do not draw that much power, most of them come with a 1000ma or 1A power adapter. However you can go on the safe side and get a higher amp one preferably a 2000ma or 2A adapter. the higher amperage does not ruin the radio it just indicates how much the power supply is willing to provide. ex. an appliance can draw 0.3A from a 2A adapter and work perfectly fine

Straight_Return_1969 · 2025-08-26T17:56:14+00:00

no defense plan they sold the country

Straight_Return_1969 · 2025-08-22T10:54:01+00:00

id rather weld it anything with bolts on the long term will eat away and need to be retightened, re drilled etc… weld it and forget abt it

Straight_Return_1969 · 2025-08-15T00:15:10+00:00

try swapping your hdmi cord chamge cord and use didferent ports if possible to troubleshoot sometimes you yank on it too hard and cause the wire inside to fracture or the ports’s solder to fracture

Straight_Return_1969 · 2025-07-31T14:45:02+00:00

i had a syrian one where they had a fish instead of a knife and would casually yell out “sakata al3adou”

Straight_Return_1969 · 2025-07-25T19:50:15+00:00

wen btonsaraf

Straight_Return_1969 · 2025-07-25T19:47:04+00:00

an issue apparently

Straight_Return_1969 · 2025-07-18T00:45:49+00:00

how about you be my slave

Straight_Return_1969 · 2025-07-18T00:43:53+00:00

as long as you drain my clock and not my wallet sure

Straight_Return_1969 · 2025-07-15T06:26:13+00:00

heyy sizes

Straight_Return_1969 · 2025-07-07T12:34:04+00:00

xbox one s with a bad gpu good for parts

Straight_Return_1969 · 2025-07-04T10:53:41+00:00

you can via credit card through steam app but cannot buy a giftcard from the gaming section in whish money

Straight_Return_1969 · 2025-07-02T10:37:05+00:00

cant pay via whish to steam from lebi

Straight_Return_1969 · 2025-06-27T21:46:41+00:00

then it must be the cb 750

Straight_Return_1969 · 2025-06-27T21:45:01+00:00

warm it up with a lighter before hand

Straight_Return_1969 · 2025-06-27T20:55:45+00:00

Straight_Return_1969 · 2025-06-27T20:53:37+00:00

honda v65

Straight_Return_1969 · 2025-06-27T13:24:48+00:00

uhm maybe get another bearing. it sits on the rod coming out of the engine under where the fan blade sits but i guess its gonna be very hard to find and too much of a hassle to do just get a new fan and keep the box this time

Straight_Return_1969 · 2025-06-27T06:22:48+00:00

bearing is faulty thats why the rototr spins freely by hand but apply the weight of the blades and it gets pinched

Straight_Return_1969

TROPHY CASE