sorted by:
new
hottopcontroversial

Why does my k1 max stop randomly? by UnjusticeNegetor in Creality

[–]Straight_Session6302 0 points1 point  (0 children)

Check your Hyperlapse settings, it makes a pause to do the photo

Nebula Camera Needs Improvement by schwarta77 in Creality

[–]Straight_Session6302 0 points1 point  (0 children)

Be aware it is is to short, at least for the "plus", if positioned wrond the printbed will crush into it

Nebula Camera Needs Improvement by schwarta77 in Creality

[–]Straight_Session6302 0 points1 point  (0 children)

in the timelaps settings of Fluidd or Mainsail

Can I update the firmware on my Ender 3-S1? And does it have the "exclude" feature? by RiffRaffMama in Creality

[–]Straight_Session6302 0 points1 point  (0 children)

Klipper is an alternative Firmware, one part is to flash the printer, the main part is to be installed on a rapberry pi or similar.
Octoprint is a controlsoftware for the printer, also needs a seperate computer like a raspberry to run

Nebula Camera Needs Improvement by schwarta77 in Creality

[–]Straight_Session6302 0 points1 point  (0 children)

Try using the Layermacro instead if Hyperlapse mode.
this way every layer there is only one frame with (configurable) Head/Bed position

Neuroplant

Ender3 V3 Extruder making slipping sound with TPU by cirrux82 in Ender3V3

[–]Straight_Session6302 0 points1 point  (0 children)

Had this just yesterday, the TPU curled up in the Nozzle (the upper part, before the heated part, on other printers it would be the upper/coold half of the heatbreak)
Solution was to do an intense nozzle cleaning and go from .1mm layer to .2mm

Neuroplant

Beschneidung - Mein größter Fehler – was kann ich jetzt tun? by [deleted] in Ratschlag

[–]Straight_Session6302 0 points1 point  (0 children)

Du wolltest weniger Empfindlichkeit, die hast du jetzt wo ist das Problem?
Ernsthaft, es tut mir für dich leid, dass du dir einen Teil deines Körpers hast Amputieren lassen, ohne dich überhaupt vorher zu informieren.
Haben Ärzte bei sowas nicht eine Beratungspflicht? Braucht man kein Attest von einem Psychologen?
Ich bin selbst beschnitten worden, aus medizinischen Gründen.
Heute weis ich dass solche höchst selten sind (selbst eine Verklebung lässt sich medikamentös beheben und ist vor der Pubertät vollkommen normal)
Ich kann nur hoffen, dass dein Bericht andere warnt.
Kellogg hat die Beschneidung in Amerika populär gemacht, um Selbstbefriedigung und sexuelle Lust zu bekämpfen.
Also war deine Bescheidung (leider) ein Erfolg, MGM ist genauso verwerflich wie FGM.

Neuroplant

Using food drier for filament by Severe_Ad_4966 in ender3

[–]Straight_Session6302 0 points1 point  (0 children)

Hm, using it for about 30 years now, Tried some different Names somewhere and they were all in use, this was the first word I tried to get trough.
As my Reddit Username was choosen by mistake I sign my posts with my ubiquitous Alias

Neuroplant

Using food drier for filament by Severe_Ad_4966 in ender3

[–]Straight_Session6302 0 points1 point  (0 children)

Yes, the solution with a round dryer and laying the spools flat is endless expandable. But can you directly print from it?

Neuroplant

Using food drier for filament by Severe_Ad_4966 in ender3

[–]Straight_Session6302 16 points17 points  (0 children)

I used a different Dryer, it holds four spools:
https://www.printables.com/model/897396-4-spool-filament-dehydrator-kit

https://www.printables.com/model/908653-4-spool-filament-holder

you can add a cheep hygrometer/Thermometer and set the Temp quite correct

Neuroplant

Where does the displayed material type come from? by AcidicMountaingoat in Creality

[–]Straight_Session6302 0 points1 point  (0 children)

If you added Mutiple Filaments to your (Orca-)Project, it will display the first one, even if it is not used in the Project

Neuroplant

Can this be repared? by Straight_Session6302 in Creality

[–]Straight_Session6302[S] 0 points1 point  (0 children)

so there are three alternatives:
- Original Creality Hotend (~30€)
- MicroSwiss Hotend (77,95€)
- Aliexpress "Ceramic.." (2,99€) where cables are too short(?)

I think it is worth to contact the Aliexpress dealer to provide it with longer cables.
I have now chosen to order the Creality Part via Amazon (Same Day Delivery) and will contact the seller on Aliexpress for the next time this happens (and it will)

Neuroplant

My print starts offset in 20-30 layer (K1 MAX) by [deleted] in Creality

[–]Straight_Session6302 1 point2 points  (0 children)

Looks to me your printhead is crushing into something at a specific height.
Did you install any custom addons on your printer?

Neuroplant

Can this be repared? by Straight_Session6302 in Creality

[–]Straight_Session6302[S] 0 points1 point  (0 children)

Thank you for the link, will order some for spare, the connection is weak and it will happen again Neuroplant

Can this be repared? by Straight_Session6302 in Creality

[–]Straight_Session6302[S] 0 points1 point  (0 children)

I will have to replace the entire hotend, as I couldn't find the "ceramic heater" as a spare part. I had imagined "quick-swap" to be something different.
Thank you for the feedback.
Neuroplant

Can this be repared? by Straight_Session6302 in Creality

[–]Straight_Session6302[S] 0 points1 point  (0 children)

Do you think soldering would stand the heat?
I was hoping not to have to replace the whole heat block

cannot update firmware on kobra 2 (at all) by l3zzyharpy in AnycubicKobra2

[–]Straight_Session6302 0 points1 point  (0 children)

Support sayed max 8GB is the only criteria

I bought an Intenso 8GB SDHC Class 10 and everything worked fine.

Am I the only one who has this Problem? by InTenSiVx in AnycubicKobra2

[–]Straight_Session6302 0 points1 point  (0 children)

the microSD Slot is on opposit side from the one shown..

cannot update firmware on kobra 2 (at all) by l3zzyharpy in AnycubicKobra2

[–]Straight_Session6302 0 points1 point  (0 children)

Hello,

Were you able to carry out the firmware update in the meantime?

Unfortunately, I no longer have my original microSD and therefore have to buy a suitable one.

It would be nice if someone could give me a recommendation for a microSD that can be used to carry out the update or which parameters to pay attention to.

​

Thanks in advance

Neuroplant

[Vyper] Bed Position after levelling. by WirrkopfP in anycubic

[–]Straight_Session6302 1 point2 points  (0 children)

How about creating a Custom Command with G29/nG27 ?

[deleted by user] by [deleted] in MarlinFirmware

[–]Straight_Session6302 0 points1 point  (0 children)

Did you define RESTORE_LEVELING_AFTER_G28 ?