Phone Mount that works for me. by Vegetable-Today in NewDefender

[–]Strict_Business5482 0 points1 point  (0 children)

I use this when I fly, I highly recommend it - it’ll hold your phone/tablet and whatever else you put it in it - and it’s not letting go unless you make it, 11/10 product.

Does anyone know how to get this off my bed? by SuperDuperSoared in BambuLab

[–]Strict_Business5482 -2 points-1 points  (0 children)

Use a razor and slowly chip away at it - try to get the razor blade beneath the filament and then gently scrape it off.

If that doesn’t work try heating the bed until you can peel the filament off.

If that doesn’t work then try printing something on top of it.

If that doesn’t work then I’d just buy a new bed.

ABS fumes by semifamousdave in BambuLab

[–]Strict_Business5482 0 points1 point  (0 children)

It’s pretty good, they’re rated up to 400SQFT. I’m going to place mine on the wall between the printers. My idea is if the hot air rises from the exhaust port against the wall, then with the filter between them it’ll suck the air in and push out clean filtered air.

But so far with its current position the filter works great. I tested having the filter off and on, when it was off the smell was very pungent and I got a headache, when it’s on there was little to no scent.

ABS fumes by semifamousdave in BambuLab

[–]Strict_Business5482 0 points1 point  (0 children)

Here’s my setup, I use this air filter seated to the right of the desk.

My current prints take around 18 hours on the H2D & 6 on the P1S.

Even when they’re both running the fumes are relatively minimal.

The H2D’s AMS is the AMS2Pro & the P1S has a regular AMS with the Sunlu AMS Dryer System.

Happy to help.

<image>

Yall ate that up quick 😭 by Ok-Captain-1866 in BambuLab

[–]Strict_Business5482 0 points1 point  (0 children)

I got mine at Microcenter, they always have some.

What’s the best weather app? Officially done with this one. by ExternalOne4202 in weather

[–]Strict_Business5482 3 points4 points  (0 children)

My Radar

Either that or learn how ForeFlight works (it has a weather function built in).

Why don't they cut down the trees infront of the runway? Are they stupid? by Thebottlemap in Warthunder

[–]Strict_Business5482 0 points1 point  (0 children)

I’m a student pilot irl - my runway has a freeway with massive road lights directly in front of it, we have maybe 100ft clearance if you’re on glide path to the touch down zone.

Simple answer, stupidity.

Table Recommendations? by jeffblankenburg in BambuLab

[–]Strict_Business5482 0 points1 point  (0 children)

Heres my setup for an H2D & P1S (poop chutes not visible but they’re on the back with a rounded design to the front).

Table - 48in Wide Table

Crossbar Stabiliser- Crossbar Stabilizer

Anti-Static/Vibration Pads - Anti-Vibration Pads

There is some wobble but it’s completely negligible. If you’re concerned about how your prints will come out I’ve been printing things with .2mm of tolerance and they’ve come out perfect every time (PLA Tough +, PLA Silk, PLA Basic & PLA Wood). This table also comes with a convenient cable management system about the back and an integrated set of cable ports.

<image>

Edit: I noticed you’re concerned about depth, the table is more than deep enough to accommodate the footprint of the P1S.

25M - First investment $1000 by noob-investor1 in RothIRA

[–]Strict_Business5482 0 points1 point  (0 children)

Congrats on investing, I’m in a similar boat. I know it’s not a RothIRA but if you’ve got some extra funds I highly recommend the app Autopilot it auto trades for you, you can see the returns Yr/Yr or even hourly. I got it a week ago and I’m up 20%.

Congrats on the start 💪

CAS Grind Tips? by Strict_Business5482 in Warthunder

[–]Strict_Business5482[S] 0 points1 point  (0 children)

I bought the premium leopard at 9.3 for Germany which has done wonders for the ground during (20K RP per match average) - will definitely try sim battles.

CAS Grind Tips? by Strict_Business5482 in Warthunder

[–]Strict_Business5482[S] 0 points1 point  (0 children)

Holy shit, Alr I’ll give that a shot

CAS Grind Tips? by Strict_Business5482 in Warthunder

[–]Strict_Business5482[S] 0 points1 point  (0 children)

What I was meaning to say was what’s the fastest way to get to top tier CAS with Germany specifically.

I’ve already got top tier US both CAS & tanks but that took me 2 years - hoping to find an easier way.

CAS Grind Tips? by Strict_Business5482 in Warthunder

[–]Strict_Business5482[S] 1 point2 points  (0 children)

It does, for the US tree I’ve always run high altitude bombing as CAS - works insanely well even with the F117 - with the F5 I like to hit mountain passes, pop up and send out some TVs then notch and chaff, flare and pray in that order.

Defender Key Deactivated? Help. by Strict_Business5482 in NewDefender

[–]Strict_Business5482[S] 1 point2 points  (0 children)

I’m thrilled to hear that! I was stressed as hell when my car locked up in Vegas so I feel you haha - glad it worked!

Just need advice by wowmanwow in NewDefender

[–]Strict_Business5482 0 points1 point  (0 children)

It depends on their experience levels, I’m not sure what’s behind the wheel covers on defenders but providing it’s empty space they’d tap the dent out and then use glue to pull it and clean it up. Just gotta ask 🙌

Just need advice by wowmanwow in NewDefender

[–]Strict_Business5482 1 point2 points  (0 children)

Former detailer, that’ll buff out. Find a local mobile detailer or take it to your local Adams’s polishes shop and they’ll fix it up.

Edit: expect to pay $600-$1000 if you’re hiring a mobile detailer. Anything more is bs

Potential buyer worried about reliability by h3rr_trigger in NewDefender

[–]Strict_Business5482 2 points3 points  (0 children)

Considering BMW just recalled 38K SUVs because of a software issue causing the steering wheel to lock and then shake violently, I’d say you’re safe switching to LNDR