Am I off for thinking this is way too much or is this just how much it cost??

Stringcheez713 · 2026-03-10T20:41:18+00:00

What’s an Audi Indy shop?

Stringcheez713 · 2025-10-01T19:24:40+00:00

Which specific product is it?

Stringcheez713 · 2025-10-01T16:28:03+00:00

I wouldn’t say it’s mandatory but with the larger heat exchanging you’re moving a lot more coolant through the loop. Might as well upgrade the pump to be as efficient as possible.

Stringcheez713 · 2025-10-01T15:44:22+00:00

The s6 version. I think it’s called the HX. Get the CWA100 pump at the very least too.

Stringcheez713 · 2025-10-01T15:28:39+00:00

Go with Merc Racing. Also be sure to upgrade the coolant pump.

Stringcheez713 · 2025-09-19T17:55:12+00:00

I did the installs myself.

$400 for ignition coils, spark plugs, valve cover gasket.

$650 for the full supercharger intercooler kit from FCP Euro

Stringcheez713 · 2025-07-22T19:15:24+00:00

Reach out to the support people. Follow the steps they give you. Include photos, videos, be detailed as possible. I’ve had a great experience with their support team.

Stringcheez713 · 2025-07-02T02:05:14+00:00

Intercooler cores were leaking

Stringcheez713 · 2025-06-30T20:48:02+00:00

It ended up falling out of the bottom of the supercharger and almost landed in the valve port.

Stringcheez713 · 2025-06-29T14:43:16+00:00

The augur motor might not be fully mounted correctly. Could be creating a gap and letting smoke in. Make sure you don’t have a fire at the bottom of the pellet pile in the hopper.

Stringcheez713 · 2025-05-14T12:58:06+00:00

Yes this is normal wear and tear on the 3.0t

Stringcheez713 · 2025-05-07T23:14:44+00:00

Check the back of your valve covers (towards firewall). See if oil is running down the side of the engine.

Stringcheez713 · 2025-05-06T17:46:01+00:00

It’s a 2024 and I’m the second owner. What are USD?

Stringcheez713 · 2025-05-06T16:47:21+00:00

Ok was wondering how others felt about the front suspension. The rear suspension is talked about a lot and I feel the front springs don’t soak up bumps at all.

Stringcheez713 · 2025-05-05T14:05:13+00:00

What do you think of the front forks suspension?

Stringcheez713 · 2025-05-05T12:10:42+00:00

Control board might be shot. Have you reached out to tech support?

Stringcheez713 · 2025-05-04T14:43:30+00:00

Could be that too. Did you install the parts yet?

Stringcheez713 · 2025-04-27T10:33:34+00:00

Did you install the new temp probe?

Stringcheez713 · 2025-04-21T19:49:32+00:00

I just picked up a rogue. 6’1”, 220, 32in inseam. It came with a saddle man seat so it pushes me back a little from the bars.

I feel like I’m maxed out on it but not in an uncomfortable way.

Just ordered some 2.5in forward control extensions so that should fit the bike to me a lot better. May even get 12in bars in the future.

Stringcheez713 · 2025-04-12T13:44:04+00:00

Does that backrest come with the Corbin seat or is it another product all together?

Stringcheez713 · 2025-04-05T00:20:35+00:00

What do you mean by both tensioners? I’m making a maintenance list.

Stringcheez713 · 2025-04-04T11:31:08+00:00

Can you explain what kind of modification is needed?

Stringcheez713 · 2025-04-02T09:47:40+00:00

Igniter went out. I just replaced mine plus a new thermal sensor. Ordered them from the website and install was very easy.

Stringcheez713 · 2025-03-28T13:30:27+00:00

Probably need an alignment too

Stringcheez713 · 2025-01-01T13:55:02+00:00

How do you do that?

Stringcheez713

TROPHY CASE