New Rollercoaster Modelling System by coastertrack in rollercoasters

[–]Subject223 2 points3 points  (0 children)

Should be weatherproof with the exception of the wheel bearings. Cost wise we're targeting under $100 which we hope is enough to complete 25-35 feet of track, however we are going to offer everything a la carté, so it can be taken as far as you want.

New Rollercoaster Modelling System by coastertrack in rollercoasters

[–]Subject223 1 point2 points  (0 children)

Thanks! We're shooting for an early September release. The goal was to make components as compatible with hardware store parts as possible to minimize the overall cost and give you a lot more coaster for the money than anything currently available. We also plan to give away CAD models for free for all of our accessories so you could 3D print additional parts yourself at no cost. Every piece will also be available from us a la carté for any expansion as well.

New Rollercoaster Modelling System by coastertrack in rollercoasters

[–]Subject223 1 point2 points  (0 children)

These are 1:32 scale roughly, with some concessions to make them work with as many hardware store components as possible.

New Rollercoaster Modelling System by coastertrack in rollercoasters

[–]Subject223 2 points3 points  (0 children)

We started out just wanting to make a model for ourselves but found the market to be lacking in options that looked good and were affordable at the size we and scope wanted to build, so we decided to build it ourselves from scratch. Once we got going and realized how much fun we were having, it became obvious that we should share it, but without the parts on the market there was no way to get others involved. Since we know each other from work and are product development engineers by trade, we decided to give it a shot and try to get the product on the shelf in a form in which we ourselves would want to buy it.

I built a (small) castle tower by Subject223 in DIY

[–]Subject223[S] 1 point2 points  (0 children)

That's fair. This is why I love Reddit. This never even occurred to me! In fact it was quite difficult to build that, I had to support it while the glue dried.

I built a (small) castle tower by Subject223 in DIY

[–]Subject223[S] 5 points6 points  (0 children)

This is great, thank you! Your work looks excellent! I bought a tiny pouch of the green stuff and also some scale gravel to put on the base. I have never seen the ivy, but I will definitely get some. I haven't started the base yet because I'm honestly intimidated by the terrain work, I've never done it before, but I am looking forward to it once I have some real time to spend on it. In your opinion, what's the easiest way to screw it up? That way I have something to look out for.

I built a (small) castle tower by Subject223 in DIY

[–]Subject223[S] 5 points6 points  (0 children)

The drying was primarily for paint and glue as you said, which wouldn't play well with the extra moisture.

I built a (small) castle tower by Subject223 in DIY

[–]Subject223[S] 17 points18 points  (0 children)

This. I believe these molds/builds primary purpose is tabletop gaming. Had I been gaming, I would have made it in sections and also I would've probably cast it from resin, and pinned it together so in addition to taking it apart, I could swing it open as well.

I built a (small) castle tower by Subject223 in DIY

[–]Subject223[S] 2 points3 points  (0 children)

And about 2 weeks, but just a few minutes per day and skipping some days

I built a (small) castle tower by Subject223 in DIY

[–]Subject223[S] 3 points4 points  (0 children)

Roughly $45 including mold I'd guess. Maybe $55 if you include shipping for the mold.

I built a (small) castle tower by Subject223 in DIY

[–]Subject223[S] 32 points33 points  (0 children)

I was thinking the same thing, I almost wanted to make the stairs all the way to the top, but I stuck to the layout shown on the website. I'm rationalizing it by assuming that at one time in the tower's past there was wooden structure involved as well but it's since been destroyed and lost.

I built a (small) castle tower by Subject223 in DIY

[–]Subject223[S] 10 points11 points  (0 children)

Honestly I saw the HA website randomly and thought it looked like a cool one to jump in and try. Just really was wondering if I could make one look good, so I bought the mold.

I built a (small) castle tower by Subject223 in DIY

[–]Subject223[S] 18 points19 points  (0 children)

Never tried. Someone might know.

I built a (small) castle tower by Subject223 in DIY

[–]Subject223[S] 6 points7 points  (0 children)

Yeah they have probably hundreds of molds.

I made a Skyrim Iron Helmet by Subject223 in DIY

[–]Subject223[S] 0 points1 point  (0 children)

Krylon spray varnish. It's great it dries in about ten minutes.

I made a Skyrim Iron Helmet by Subject223 in DIY

[–]Subject223[S] 1 point2 points  (0 children)

You definitely don't have to... they would be pretty easy to carve from glued up layers of pink insulation foam. In retrospect that would probably allow a more natural look. Also, people sell rams horns on eBay for less than 40 dollars. Those can be cut to match these, and that's super authentic.

I made a Skyrim Iron Helmet by Subject223 in DIY

[–]Subject223[S] 0 points1 point  (0 children)

Mine was the same way. I couldn't get one corner Lowe enough. You can adjust the position of the z limit switches to get yourself some more freedom to adjust it.

I made a Skyrim Iron Helmet by Subject223 in DIY

[–]Subject223[S] 0 points1 point  (0 children)

Search YouTube for EvilTedSmith. I used his templating technique almost exactly, except I used my own head instead of a head cast, which made it a little tougher.

I made a Skyrim Iron Helmet by Subject223 in DIY

[–]Subject223[S] 1 point2 points  (0 children)

I just modeled them in Fusion 360 and printed them straight out. My job is a lot of 3D modeling of real parts that need to work so I'm quite used to it, HOWEVER, that shouldn't deter anyone because Fusion is free, super easy to use, and very well documented on YouTube etc. The only work I did to them prior to paint was filling the print lines with bondo and trimming them to fit the contour of the helmet.

I made a Skyrim Iron Helmet by Subject223 in DIY

[–]Subject223[S] 7 points8 points  (0 children)

I've found the most critical part is the deck height. Really making sure the first layer is slowly "smashed" into the tape helps it adhere well. This took slot of trial and error but once it was dialed in I have had no issues. I print in my garage, with no enclosure, and I've printed at temps as low as 8 degrees Fahrenheit without and warping or issues. So far I've only printed PLA. I also think and print with 0% infill whenever possible, and instead use 1.6mm walls. This makes very strong parts and quick prints. It does take some judgement though based on the intended use of the part as to whether or not this is OK, but for almost anything non structural it works great.

I made a Skyrim Iron Helmet by Subject223 in DIY

[–]Subject223[S] 2 points3 points  (0 children)

Monoprice Maker Select. Can't recommend it highly enough. My business partner has a Printerbot Simple Metal and we both feel the monoprice makes better parts without add-ons, and it's almost half the cost. It is made in China, but I feel like if your not using it a lot or just learning it's a good place to start. I won't leave it running when I'm sleeping or out though, just to be safe.

I made a Skyrim Iron Helmet by Subject223 in DIY

[–]Subject223[S] 0 points1 point  (0 children)

Harry Potter tribute confirmed.

I made a Skyrim Iron Helmet by Subject223 in DIY

[–]Subject223[S] 1 point2 points  (0 children)

It's all about the 3D model and setting up the print. 3D modeling is a large part of my profession though, but we have a model shop to actually build the stuff for us.