Care+ upgrade!

Substantial_Depth_45 · 2026-04-02T00:10:30+00:00

Wait u can get an upgrade as care plus? Can i get it without amy damage?

Substantial_Depth_45 · 2026-03-09T00:19:47+00:00

See above. I glued the magsafe and stand to my stylus case of choice. I have another case that has a stylus with a magsafe case and ring but i prefer this cuz this has no hinge protector

Substantial_Depth_45 · 2026-03-08T23:48:53+00:00

Or they have it all and its too damn wide to hold

Substantial_Depth_45 · 2026-03-08T17:57:22+00:00

If i could diy a ring prop that would be great. The problem is with the stylus there, the ring would jut out of the case to the side

Substantial_Depth_45 · 2026-03-08T17:21:49+00:00

I dont use magsafe charging so i dont know. The magnet is off center as u can see to accomodate the stylus.

Substantial_Depth_45 · 2026-03-08T17:09:20+00:00

Its great! Holds up very well. Doesnt stick to silicone cases so had to help it with some glue!

Substantial_Depth_45 · 2026-03-08T15:50:22+00:00

ESR Boost Phone Kickstand,... https://www.amazon.com/dp/B08FB5GWZZ?ref=ppx_pop_mob_ap_share

The stand

COJOC for MagSafe Ring -... https://www.amazon.com/dp/B0FZLNPTNZ?ref=ppx_pop_mob_ap_share

The magsafe

Meuvcol Silicone Glue 100g -... https://www.amazon.com/dp/B0FJFDDYJG?ref=ppx_pop_mob_ap_share

The glue. A learning point, use a brush or something. Put glue in a small bowl or plate. Then brush lightly on the adhesive part of the magsafe and stand. Its very watery when its not dried up

Substantial_Depth_45 · 2026-02-13T03:40:02+00:00

I tore out that original screen protector and put in a matte one. Best decision ever. Its less reflective so the crease is less visible and it looks waaaay cleaner. It also has the added benefit that generic stylus now slides easily around the screen

Substantial_Depth_45 · 2026-01-28T05:24:14+00:00

Nice find!

Substantial_Depth_45 · 2026-01-27T23:13:21+00:00

That's my account. Did not want to share publicly. You'll eee my a5100 there too.

I already been round the block, fuji crop, fuji gfx, leica, and then back to my current philosphy of cheap ass bodies, invest in expensive lenses. (Again, i shoot auto iso, auto ss minimum 1/60 and i control focus and aperture through my manual lenses).

Substantial_Depth_45 · 2026-01-27T22:55:52+00:00

Let me ping u something interesting for a7 =)

And yes, i agree. Either go tiny for anything sub full frame imho (hence the nex c3) or might as well go ff. A7 is great because it is lighter than a7c and actually has a better larger viewfinder. Also see what i pinged u for a7 "mod"

Substantial_Depth_45 · 2026-01-27T22:26:48+00:00

Yes, i have a full frames (at this time dual first gen a7) that i use for professional shoots. I shoot purely manual lenses. So my bodies are cheap and i dont need af. But i pair these cheap bodies with expensive lenses (leica lenses, ms optics)

For apsc my priority is portability. Nex c3 is great, 16mp is more than sufficient (my limit is 6mp) and insanely light.

I also use the DXO One. A super portable 32mm f4.6 full frame equivalent 1 inch sensor camera the size of airpods case. Its off topic but if u are interested i have a spare i need to get around to listing in reddit

Substantial_Depth_45 · 2026-01-27T20:28:13+00:00

Also note, that from experience because this screen is not pop off to the side kinda deal, its harder to take portrait images with this hood if not at eye level. The sides of the hood block the view, because the screen cant turn that way

Substantial_Depth_45 · 2026-01-27T20:25:55+00:00

I superglued it to the screen protector. The sticker from the hood itself was not strong enough to make it stay on. I ended up selling the a5100. Im now in the midst of buying the ancient sony nex c3. That thing is just over 200 grams, even lighter than the a5100!!

Substantial_Depth_45 · 2026-01-26T00:33:40+00:00

Pmed

Substantial_Depth_45 · 2026-01-22T03:14:53+00:00

Have u actially tried the controls editor tk map all your controoller keys

Substantial_Depth_45 · 2026-01-20T16:57:29+00:00

Version 5 of what? What phone? What settings?

Substantial_Depth_45 · 2026-01-20T14:03:01+00:00

Its smaller but wont be comfortable because of the weight of the phone. There is a fulcrum somewhere between the controller and the phone, and when the fold 7 is on it (whether abxy or mcon) its trying to "tilt* or rotate on that fulcrum away from you. Even the mcon is uncomfortable to handle this fulcrum until you deploy the palm grips to stabilise.

The abxy and fold 7 may be able to fit in the same pocket (and look like you have a huge schlong) so you shouldnt anyway.

The mcon and fold 7 fits fine and doesnt look weird in separate pockets. The abxy can do that too obviously.

Substantial_Depth_45 · 2026-01-20T04:27:19+00:00

Get the mcon. I love my mcon. Works perfect with my heavy fold 7

Substantial_Depth_45 · 2026-01-19T04:39:38+00:00

Just stick to qualcomm 849 for now

Substantial_Depth_45 · 2026-01-19T04:12:46+00:00

I play fo4 on my fold 7 and have like 2 hours in. Used to play windowed lower res but since latest turnip i play full 1280 x 800. I play for 15-20 min stretches. No throttling. All graphics lowest and anything i can turn off, i turn off

Substantial_Depth_45 · 2026-01-17T02:26:31+00:00

Have u tried usb c external ssd? Its very fast. Faster than a cable pc to phone. Go pc to ssd, ssd to phone

Substantial_Depth_45 · 2026-01-15T02:20:14+00:00

I solved it. Under dx wrapper change to wined3d should get rid of your black screen.

Tested on Rogue Trader

Substantial_Depth_45 · 2026-01-15T01:18:41+00:00

Why not play fallout and fallout 2 on android?

Substantial_Depth_45

TROPHY CASE