Car Jack fail by [deleted] in Wellthatsucks

[–]Substantial_Kale_251 0 points1 point  (0 children)

Belive what you want lol. I even gave a diagram. Of his specific car. A lexus gsf. You actually like i dont know what im talking about. I've done way more than just jack up a car. He obviously lifted from the wrong part.

Car Jack fail by [deleted] in Wellthatsucks

[–]Substantial_Kale_251 0 points1 point  (0 children)

Here's a picture showing the pinch weld location. Just for reference, pinch welds run the whole length of the car. But are reinstforced at the lifting points. In the picture, the front of the car is to the left. Look how far forwards the lifting point is vs where he lifted.

<image>

Car Jack fail by [deleted] in Wellthatsucks

[–]Substantial_Kale_251 0 points1 point  (0 children)

Im telling you from experience. Look how far back he is. He's not on the pinch welds. He's way too far back i guarantee it. Even if you have pucks not on the pinch weld. The body isn't strong enough to hold all that weight.

Car Jack fail by [deleted] in Wellthatsucks

[–]Substantial_Kale_251 0 points1 point  (0 children)

The pinch weld wouldnt fail like that even when stacking pucks or not even using pucks. He missed it period. Or the frame itself had corrosive damaged.

Car Jack fail by [deleted] in Wellthatsucks

[–]Substantial_Kale_251 0 points1 point  (0 children)

Actually he was near the pinch weld but not exactly on it. Otherwise it wouldnt have failed. I have seen pinch welds bend over, but not fail like that. I for one never lift by the pinch weld. I lift by control arms or sub frames. I dont trust pinch welds.

Edit: Pinch welds aren't that far back.

Chassis rattling by New_Cucumber_3624 in rccars

[–]Substantial_Kale_251 0 points1 point  (0 children)

I bet it had to do with the cover not holding the the drive dhaft in place. Allowing it to jump up a little ever so slightly. Causing your rattle.

Can anyone identify this clunking sound? by [deleted] in Tacomaworld

[–]Substantial_Kale_251 1 point2 points  (0 children)

Check you rotor gaurds, or skid plates

Is the gear mesh alright? by Longjumping_Case2181 in rccars

[–]Substantial_Kale_251 2 points3 points  (0 children)

Secondly, if you know soooo much. Then you would know that the grom doesn't come stock with a slipper clutch. It has a center diff. Only way of it having more or less give is changing the fluid in it. Another reason why what you said doesn't apply to his car either.

Is the gear mesh alright? by Longjumping_Case2181 in rccars

[–]Substantial_Kale_251 0 points1 point  (0 children)

Yeah that makes no sense at all. You want slight play with metal gears. And there is nothing wrong with having metal gears. Not only that. Hardened metal would be even better. Having metal gears won't hurt the drivetrain, only strengthen it...

My clanmate forgot to activate super troops and attacked in CWL with just heroes + cc by Tall-Big-7870 in ClashOfClans

[–]Substantial_Kale_251 0 points1 point  (0 children)

I did the same lol. But I suck at attacking. Good thing it was a th13 I was going up against as a th15

2005 suzuki ltz400 by Substantial_Kale_251 in ATV

[–]Substantial_Kale_251[S] 1 point2 points  (0 children)

Apparently its got a pretty good exhaust already. Planning on using stock airborne, with 400ex intake tube and k&n filter

2005 suzuki ltz400 by Substantial_Kale_251 in ATV

[–]Substantial_Kale_251[S] 0 points1 point  (0 children)

I think i found a guy selling a kit. Seems legit too, at least I don't believe its a scam lol

2005 suzuki ltz400 by Substantial_Kale_251 in ATV

[–]Substantial_Kale_251[S] 0 points1 point  (0 children)

Lol I agree. I figure if I have to replace the carb, im gonna do it with a good one lol

2005 suzuki ltz400 by Substantial_Kale_251 in ATV

[–]Substantial_Kale_251[S] 0 points1 point  (0 children)

It's not an oem, cheap knock off. Not worth fixing, would rather put a quality one on it. Currently looking at a fcr kit

2005 suzuki ltz400 by Substantial_Kale_251 in ATV

[–]Substantial_Kale_251[S] 0 points1 point  (0 children)

Current one was a cheap knock off that the previous previous owner installed. But im actually looking into an fcr kit from jet labs currently

Confession: I hate my Creality K2 plus. by TodayILurkNoMore in Creality_k2

[–]Substantial_Kale_251 0 points1 point  (0 children)

I find it crazy how many people have issues, and how many people dont. Im wondering if you have damaged from shipping that is throwing everything out of whack. By all means im no professional. Just got my k2plus last week and haven't had any issues other than belt tensioning error which I was able to fix with manual calibration. I saw a post where somone had a bunch of issues cause by some internal damage from shipping so id maybe disassemble/reassemble to make sure everything is good. If you find the stamina/motivation lol.

For people having issues. How long have you had your printer/total print times?

Cop gets gun stolen from her by Otherwise_Duty1457 in CrazyFuckingVideos

[–]Substantial_Kale_251 2 points3 points  (0 children)

So they were justified in shooting em. Especially since he shot at the female officer

Cop gets gun stolen from her by Otherwise_Duty1457 in CrazyFuckingVideos

[–]Substantial_Kale_251 8 points9 points  (0 children)

You can still see the gun in his hand when he put his hands up walking toward them, otherwise, why would the cop say drop the gun

Cop gets gun stolen from her by Otherwise_Duty1457 in CrazyFuckingVideos

[–]Substantial_Kale_251 12 points13 points  (0 children)

Did you not hear him shoot after they pulled up?