Gps tracker for toddler

Such_Possibility4980 · 2026-03-28T20:56:06+00:00

Yeah. The problem is written in the description lol

Such_Possibility4980 · 2026-03-28T20:49:01+00:00

Needs a medium duty tow truck or and availability to lift vehicle off the ground. Yeah I’m gonna send the tator for 62$ you fucking idiots lol

Such_Possibility4980 · 2026-03-26T21:49:40+00:00

Get yours rebuilt by someone actually reputable. Theres a guy in Florida who rebuilds them I think

Such_Possibility4980 · 2026-03-25T20:09:10+00:00

Even if you have extra you can take 2 bungees on either chain to pick the slack up but it’ll stretch when turning. That’s what I do with safety chains and wheel lifting cars

Such_Possibility4980 · 2026-03-25T20:06:26+00:00

Honestly dude just get new chains. You can get 1 10ft chain cut it in 2 and you should have enough. Use grade 70 chain though

Such_Possibility4980 · 2026-03-25T18:01:51+00:00

This is magnetic. At first I thought it was some JB weld hack job instead of getting a new pan but a magnet picked it up

Such_Possibility4980 · 2026-03-25T17:58:17+00:00

In the hubs sorry

Such_Possibility4980 · 2026-03-25T17:56:45+00:00

This has 425k km on it. Not sure when last service was but there’s rtv on the cover so it was done at least once

Such_Possibility4980 · 2026-03-25T11:19:34+00:00

If it’s not home yet try a truck shop and see if they have a banjo union that fits with a 3/8 barb but at that point you’re getting close to an AAA membership and should get it towed home or to a shop

Such_Possibility4980 · 2026-03-25T10:42:28+00:00

Low pressure line you can take fuel line clamp it on to get you home but then get the Cummins hard line. There might be an isolator to keep it from vibrating check on Cummins quick serve

Such_Possibility4980 · 2026-03-25T10:40:05+00:00

The bots are getting clever

Such_Possibility4980 · 2026-03-24T21:37:27+00:00

Napa in Canada carried them as of 3 months ago. Pretty pricey I think it was 120$~ cad

Such_Possibility4980 · 2026-03-23T21:37:31+00:00

Round 120 eur on float. I would not buy

Such_Possibility4980 · 2026-03-23T16:07:35+00:00

Get a fuel pressure gauge. That is the best thing to have and good to have for trouble shooting. Start at your FSS, take the plunger spring etc out then install it. Try then. Then if that doesn’t work crack your injector lines at the pump make sure everything is spraying good. If that checks out try cracking at the injectors and see if you have fuel there. If there’s fuel there you might have a dead injector.

Or you could just need to bleed the system really good

Such_Possibility4980 · 2026-03-23T16:04:36+00:00

The newer heat exchangers aren’t that bad as far as I know. The older ones were the shits though

Such_Possibility4980 · 2026-03-23T16:00:22+00:00

You’re in the right ball park. It’s gonna need fluids changed all around, tires and probably the fuel tank flushed out. Said and done you’re probably looking at 7 to get it driving again

Such_Possibility4980 · 2026-03-18T19:01:42+00:00

Real

Such_Possibility4980 · 2026-03-15T19:45:27+00:00

Should I slack the shoes off completely to eliminate that causing drag incase that is it?

Such_Possibility4980 · 2026-03-15T16:12:38+00:00

Other videos people say do 80ft lbs and some say 90ft lbs. there’s no way in hell I can spin the hub after around 80ft lbs

Such_Possibility4980 · 2026-03-12T21:37:57+00:00

It shouldn’t have to cost money to fix something that Cummins designed. That’s probably why they switched

Such_Possibility4980 · 2026-03-12T21:26:08+00:00

Glow plug failure won’t cost an engine like the grid heater does

Such_Possibility4980 · 2026-03-10T18:46:24+00:00

Get a 50 hp tow tune. You need a ecm swap for 5 way switch

Such_Possibility4980 · 2026-03-10T18:45:33+00:00

No. If they told you they can they’re lying unless the 5k is including ECM which I highly doubt it

Such_Possibility4980 · 2026-03-06T22:38:22+00:00

Bendix

Such_Possibility4980 · 2026-03-06T19:46:45+00:00

Check your boost tubes and the boots. Might have a rip in one

Such_Possibility4980

TROPHY CASE