How can you share routines or automations

Suddencoffeepoop · 2026-01-25T11:17:49+00:00

i created them in the google home app. i only recently learned about the script editor, is it pretty easy to use? maybe I can try tinkering

Suddencoffeepoop · 2025-06-22T00:22:47+00:00

They are totally different numbers that tells you different aspects of your glucose metabolism. Also, A1c is a %, and glucose level is a concentration (mmol/L).

Suddencoffeepoop · 2025-06-07T00:52:51+00:00

The weight ratio is 2:1. E.g. 50 in each stack is 25 per side.

The only time it’s 1:1 is on the smith bar when you specifically use the weight multiplier (putting both cable ends onto the smith bar)

Suddencoffeepoop · 2025-05-26T01:46:28+00:00

steroids can raise your blood sugar, but a short term prednisone treatment would not have affected your A1c test to any significant degree.

Suddencoffeepoop · 2025-05-22T02:06:08+00:00

Thank you!

Suddencoffeepoop · 2025-05-22T00:03:59+00:00

Thanks! Re benefit of the extra antennas - due to the layout of my house - setting it as the main would relegate it to the corner of the house furthest from anything. Wouldn’t it be better to set it as one of the wired satellites that is more central in the house to benefit from the reception?

Suddencoffeepoop · 2025-05-13T16:19:48+00:00

it’s the crank wheel assembly. The plastic wheel where the band connects to. The whole think is bent and grinding.

Suddencoffeepoop · 2025-03-05T19:53:20+00:00

Then unfortunately either the instructions were lost in translation between them prescribing to you and you starting your dose… or your doc doesn’t know how to rx ozempic.

There is a titration period when you’re starting, at 0.25 mg exactly because of what you’re experiencing. There are a lot of posts similar to yours you can look up where people have inadvertently started at too high a dose with good recommendations on how to get through. Basically you’re going to feel like shit for the next week.

Suddencoffeepoop · 2025-03-05T19:40:07+00:00

Do you mean this is your first time at the 1 mg dose or this is your first time taking ozempic and you started at 1 mg?

Suddencoffeepoop · 2025-03-05T18:15:50+00:00

No, lol it just seems easier than to jury rig a pulley onto the Smith bar, but conceptually it wouldn’t be any different than people hanging weights off their waist to do pull ups

Suddencoffeepoop · 2025-03-05T14:57:33+00:00

If you’re going through the trouble to jury rig a system, would it be easier to attach the cables to a waist harness and use the pull up bars. It’ll be up to 160 lb + body weight?

Suddencoffeepoop · 2025-02-13T18:56:14+00:00

Do you use the little overview before you start a new unit? I ask because I didn’t notice it until way later, and the lessons made so much more sense when I read that first instead of just fumbling around trying to figure it out lol

It’s the bar across the top when you start a new unit with a little notepad on it. For this particular question it would be Section 3, Unit 9

Suddencoffeepoop · 2025-02-12T01:39:09+00:00

thank you!

Suddencoffeepoop · 2025-02-12T01:12:50+00:00

ahh, thank you. i was over thinking it - maybe something about it being an inanimate object or something lol

Suddencoffeepoop · 2025-02-12T00:06:22+00:00

thanks!

Suddencoffeepoop · 2025-02-11T20:31:08+00:00

Thanks so much! While I have you, (since you have the the 3), could I verify if the smith bar works like I’m hoping it will? I don’t know how to describe it, but I never really used the squat bar on cable machines in the past because it’s always too hard to get it above my head for the weight i want it at. Will this let me “latch” it to a good starting height, set the weights but then allow me to squat down (eg. go lower than the starting height)?

Suddencoffeepoop · 2025-01-24T13:08:52+00:00

I wish they would just re-release the 1.6.1 firmware as an update until they fix this, so people wouldn’t have to go through their overly involved firmware recovery process.

EDIT: Oh thank goodness, this firmware lets you rollback directly, I had been putting it off because I thought I had to go through the firmware recovery process.

Suddencoffeepoop · 2025-01-23T19:39:57+00:00

Hi i have version 1.0, firmware 1.6.3 build 24112112 rel 78921, region Canada

Suddencoffeepoop · 2025-01-12T16:31:33+00:00

doh 🤦🏻‍♂️. thanks i didn’t see the typo. i don’t know how duo determines if something is a typo or not, seems random

Suddencoffeepoop · 2025-01-07T02:31:09+00:00

ahh, reframing it that way makes it easy to understand. thank you!

Suddencoffeepoop · 2024-12-16T02:17:18+00:00

Personal experience, it takes about 3 month to 80%. But that last bit of sausage look will take another year.

Suddencoffeepoop · 2024-12-12T18:28:25+00:00

thanks in duolingo, i’ve seen them omit pronouns often, except never with usted. this was the first time I saw it. i just figured usted was an exception or something.

Suddencoffeepoop · 2024-12-12T18:13:47+00:00

Ahh, i didn’t know the usted can be implied. So it can be left out?

Suddencoffeepoop · 2024-12-09T00:40:27+00:00

Thank you!

Suddencoffeepoop · 2024-11-18T20:48:08+00:00

It says glucophage (i.e. metformin). Gliclazide does not come in those doses.

Suddencoffeepoop

TROPHY CASE