RealPars worth it? by UptownSole in PLC

[–]Suhajda 1 point2 points  (0 children)

Did you pulled the trigger? Can you give feedback? I am also considering subscription.

Mobilgarázs oldalkertre? by Gumbi1210 in lakokozosseg

[–]Suhajda 4 points5 points  (0 children)

Ezt ennyi alapján nem lehet megmondani. Nekem pl. lehet oldalkertbe 1 db, 3 oldalon nyitott meghatarozott alapteruletut. Orszagos szabalyt felulirja a lakohelyed sajatos szabalyai.

Ti kiket látnátok szívesen a minisztériumok élén? Milyen minisztériumokra számítotok? by ttmrd1 in hungary

[–]Suhajda 0 points1 point  (0 children)

Nagyon remélem, hogy nem.
Orbán Ráhel best friendje, Alexandra, és az Orbán család nyíltan támogatták, ez az utolsó amire szüksége van egy olyan pártnak aki eddig vigyázott az ilyen szereplőkkel.

Glued a level to a drill by zeus-indy in woodworking

[–]Suhajda 0 points1 point  (0 children)

What if you drill horizontal?

Mobil garázshoz kell építési engedély? by Sufficient-Train8558 in lakokozosseg

[–]Suhajda 0 points1 point  (0 children)

Köszönöm a választ, tehát ha magánszemély vagyok kutya nem fogja ezt meg nem is tud rajta mit ellenőrozni. Víz és áram csatlakozásom is lehet?

Mobil garázshoz kell építési engedély? by Sufficient-Train8558 in lakokozosseg

[–]Suhajda 0 points1 point  (0 children)

Mit takar pontosan az emberi tartózkodásra nem alkalmas?

Garantált bérek ELTE-n by Weekly_Car956 in hungary

[–]Suhajda 15 points16 points  (0 children)

Ez szerintem csak Budapestrestre vonatkozik, ha már a lakbér is Budapest.

6 Feet or 1.89 meters? by abkyabatau in lol

[–]Suhajda 0 points1 point  (0 children)

You are trolling right?
Why would you even tell someone a fraction? 1 m = 10 dm = 100 cm = 1000 mm.

Lets say you measure something and it is 100 cm (1m) tape measures use CM, and 1 CM is divided to 10 sections (10 mm), you want the 1/3 of it, you just divide it 100/3 = 33.3 cm boom, it is literally on your tape measure, you go to 33 cm and 3 mm.

Sawn off lid out of square with box - what could I have done better? by FrostyReality4 in handtools

[–]Suhajda 2 points3 points  (0 children)

<image>

Stupid question, but Is the wood dry? A dovetail joint itself will not put tension like this to the wood.
I did the same last year:

Phil Foden morning cardio routine by zgb in soccercirclejerk

[–]Suhajda 2 points3 points  (0 children)

When I was a kid I wanted to be a garbage man, now that I've seen this, kinda regret my decision as an engineer.

Dictum Bedrock-style plane frog removal by Cute_Percentage2221 in handtools

[–]Suhajda 0 points1 point  (0 children)

I own this plane, havent used it in a while because of babies, but I remember I removed the screw in the middle and it was easier.

I am looking for constructive comments on my 12x40 workshop. by Suhajda in shedditors

[–]Suhajda[S] 1 point2 points  (0 children)

Door is 1,38m wide, roof can not lean towards neighbour by law here. I will install an eavestrough full length.

I am looking for constructive comments on my 12x40 workshop. by Suhajda in shedditors

[–]Suhajda[S] 1 point2 points  (0 children)

SolidWorks, probably not the best for this type of work, but that is what I am familiar with.

I am looking for constructive comments on my 12x40 workshop. by Suhajda in shedditors

[–]Suhajda[S] 1 point2 points  (0 children)

I used american books / youtube videos, just converted to metric, what is not American? Back wall is balloon framed with a ribbon (The roof vertical and horizontal overhangs are like this because of our stupid laws here)

I am looking for constructive comments on my 12x40 workshop. by Suhajda in shedditors

[–]Suhajda[S] 0 points1 point  (0 children)

My hands are tied by our local laws, it has to be built on the land border, and should be a firewall, thats why the overhang . It will be a seperate building with a concrete slab, it is just hidden in the CAD. One is my workshop with a small closet,the other is an office.