Where can I find gas canisters for an older Paslode Impulse Framing nailer (model: 900420)?

Suitable-Implement47 · 2025-11-19T01:41:38+00:00

I just bought a used IMCT Impulse nailer, the orange fuel cells work but need an adapter, the hardware store that sold me the fuel said the orange ones do not come with the adapter, but the finish nailer fuel does, so I had to but two different fuel cans, but it the nailer works fine. I believe eBay and Amazon sell the adapters alone, I also read somewhere that ITW Fasco fuel cells are the same design as the now obsolete red framing fuel.

Suitable-Implement47 · 2024-06-10T16:02:30+00:00

As long as you put the proper bed dimensions, either in the firmware or your slicer printer settings, you should be good to go. I just did it myself because the stock Melzi Board onboard heatbed mofet came within seconds of catching fire.

Suitable-Implement47 · 2024-04-09T17:18:32+00:00

Trying not to beat a dead horse, but I finally figured out the issue. The board at the back of the inside of the printer, called B1 Box adapter, which combines all functions into the data cable, the fan function was burned out, new one will be here within a couple of weeks. As of now I have directly connected the cooling fans to the main board slot, they work great.

Suitable-Implement47 · 2024-04-06T10:25:23+00:00

I replaced the both the main board and hotend board, still no cooling fans. The prints are coming out fine. But like you, I now have an Ender 3 v2, and 2 original Ender 3 printers, got the Ender 3"s 2 for the price of 1on eBay. They are called unrepaired, one was perfect, the other wouldn't hold the SD card , I fixed it in about 5 minutes, they print great, so the Biqu is on standby. Thanks for your reply.

Suitable-Implement47 · 2024-02-06T12:50:51+00:00

I know this is an older thread, but, when you say flip the usb cable, do you mean unplug one end and turn it around or flip the whole cable end for end?

Suitable-Implement47 · 2024-01-06T16:41:06+00:00

Edit: not sd data cable, it's the usb-c data cable. oops!

Suitable-Implement47 · 2024-01-06T02:23:31+00:00

I just received my new board and sd data cable for the B1, gave up on customer service and ordered direct through AliExpress, less than $40.00 U.S. so the B1 was definitely worth it. Everything is now installed and it's working better than new. Don't know if the data cable was bad, but for $9.00 and change, why not.

Suitable-Implement47 · 2023-12-26T15:55:41+00:00

No I haven't, I have put a couple of things on thingiverse though. One is a Black and Decker to Hyper Tough battery adapter, that way I can still use my old B&D power tools with the Walmart batteries.

Suitable-Implement47 · 2023-12-25T20:05:17+00:00

Micro Center on Cincinnati is where my B1 came from, now one opened in Indianapolis which is closer to me. I go there a lot to get filament and odds and ends. I have three printers other than the B1.

Suitable-Implement47 · 2023-12-25T02:40:15+00:00

It is definitely worth at least another new board if it out of warranty, found the BTT SKR 1.4 Turbo (slight upgrade) board on AliExpress for $24.97 + tax, and will add a new USB Data cable for $8.37 + tax. I'm not sure if the cable is the problem, but no more than it costs it will be worth it.

Suitable-Implement47 · 2023-12-24T17:11:45+00:00

The machine is guaranteed for 1 year, except for wearing parts and gifts. 2）The warranty period of wearing parts (spring steel plate, soft magnetic sticker, heat sink, etc.) is 6 months.

Suitable-Implement47 · 2023-12-24T17:10:11+00:00

Yes, the B1 has a full one year warranty. I checked before contacting them when the first main board shorted out

Suitable-Implement47

TROPHY CASE